Commit Graph

157234 Commits

Author SHA1 Message Date
Jilles Tjoelker
a129ce0167 sh: Test that all bytes from 1 to 127 can be used in IFS.
This also passes on stable/8.
2010-08-15 17:14:05 +00:00
Hajimu UMEMOTO
2db99256b1 Correct the return code from _dns_gethostby*() to correspond
with h_errno.

Obtained from:	NetBSD
MFC after:	2 weeks
2010-08-15 16:28:08 +00:00
Konstantin Belousov
4816a1d1e4 Add missed dependency.
Submitted by:	gcooper
MFC after:	1 week
2010-08-15 15:33:01 +00:00
Dag-Erling Smørgrav
b6fbd4d50d no-op commit to note that the example given in the previous commit is
a very bad one, since the shift does not actually overflow.  This is
a better example (assuming uint64_t = unsigned long long):

  ~0LLU >> 9             =   0x7fffffffffffffLLU
  ~0LLU >> 9 << 10       = 0xfffffffffffffc00LLU
  ~0LLU >> 9 << 10 >> 10 =   0x3fffffffffffffLLU
2010-08-15 14:55:32 +00:00
Dag-Erling Smørgrav
1035d74025 Fix the overflow test. It is possible for the result of an
overflowing shift to be larger than the original value, e.g.

         (uint64_t)1 << 53 = 0x20000000000000
 ((uint64_t)1 << 53) << 10 = 0x8000000000000000
2010-08-15 14:50:03 +00:00
Pawel Jakub Dawidek
6d4317a1e4 More tests (especially for lchmod(2)), less code duplication. 2010-08-15 14:44:48 +00:00
Konstantin Belousov
fd45f9f8a1 Add convenience defines for hidden and default/exported attributes.
MFC after:	2 weeks
2010-08-15 14:38:01 +00:00
Andre Oppermann
e4e9266071 Fix the interaction between 'ICMP fragmentation needed' MTU updates,
path MTU discovery and the tcp_minmss limiter for very small MTU's.

When the MTU suggested by the gateway via ICMP, or if there isn't
any the next smaller step from ip_next_mtu(), is lower than the
floor enforced by net.inet.tcp.minmss (default 216) the value is
ignored and the default MSS (512) is used instead.  However the
DF flag in the IP header is still set in tcp_output() preventing
fragmentation by the gateway.

Fix this by using tcp_minmss as the MSS and clear the DF flag if
the suggested MTU is too low.  This turns off path MTU dissovery
for the remainder of the session and allows fragmentation to be
done by the gateway.

Only MTU's smaller than 256 are affected.  The smallest official
MTU specified is for AX.25 packet radio at 256 octets.

PR:		kern/146628
Tested by:	Matthew Luckie <mjl-at-luckie org nz>
MFC after:	1 week
2010-08-15 13:25:18 +00:00
Andre Oppermann
0e678ed825 Initializing the new error variable to zero in syncache_socket()
is not necessary.

Noticed by:	bz
2010-08-15 13:07:08 +00:00
Adrian Chadd
f70c72aa0c Fix indenting/whitespace issues introduced by me. 2010-08-15 11:40:53 +00:00
Adrian Chadd
5674f4a799 The comment is misleading - that register setting seems to kick off the
initial chip NF cal.
2010-08-15 11:32:05 +00:00
Andre Oppermann
943044b01f Add more logging points for failures in syncache_socket() to
report when a new socket couldn't be created because one of
in_pcbinshash(), in6_pcbconnect() or in_pcbconnect() failed.

Logging is conditional on net.inet.tcp.log_debug being enabled.

MFC after:	1 week
2010-08-15 09:30:13 +00:00
Warner Losh
2d8084397f Given the lag between introducing the options-compat and fixing the
bug in the config file was long, and merged to stable, we have to bump
the version here so that stable/8 kernels can have their required
version number bumped to make sure the right config is used.

MFC after:	3 days
2010-08-15 08:49:07 +00:00
Warner Losh
e21944b6bd Turns out that it is a bad idea to have a missing compat option be a
fatal condition.  While it works out really well for diagnosing the
case where you want it, but don't have it, it works really badly for
the case where you don't have it and don't want it.  Remove the printf
and exit pair.  Replate it with simple return to silently ignore this
condition.

This is needed to fix the COMPAT_IA32 being required in options.* in
stable, but we need to run this change through -current first...

MFC after:	3 days
2010-08-15 08:44:32 +00:00
Doug Barton
15539a8a80 Fix silly typo on my part (s/quotas_enable/quota_enable/)
Submitted by:	ed
2010-08-14 22:28:07 +00:00
Jens Schweikhardt
468c754560 Correctly spell janice and jimmy as janis and jimi (assuming
the famous rock stars meant were Miss Joplin and Mr Hendrix.)
2010-08-14 21:48:22 +00:00
Andre Oppermann
153e5b57af When using TSO and sending more than TCP_MAXWIN sendalot is set
and we loop back to 'again'.  If the remainder is less or equal
to one full segment, the TSO flag was not cleared even though
it isn't necessary anymore.  Enabling the TSO flag on a segment
that doesn't require any offloaded segmentation by the NIC may
cause confusion in the driver or hardware.

Reset the internal tso flag in tcp_output() on every iteration
of sendalot.

PR:		kern/132832
Submitted by:	Renaud Lienhart <renaud-at-vmware com>
MFC after:	1 week
2010-08-14 21:41:33 +00:00
Andre Oppermann
40fe9eff47 Change the messages of the ICMP bad port bandwidth limiter from
a kernel printf to a log output with the priority of LOG_NOTICE.

This way the messages still show up in /var/log/messages but no
longer spam the console every other second on busy servers that
are port scanned:
 "Limiting open port RST response from 114 to 100 packets/sec"

PR:		kern/147352
Submitted by:	Eugene Grosbein <eugen-at-eg sd rdtc ru>
MFC after:	1 week
2010-08-14 21:04:27 +00:00
Andre Oppermann
bee4e5afa9 Disable TCP inflight limiter by default.
It was experimental and interferes with the normal congestion control
algorithms by instating a separate, possibly lower, ceiling for the
amount of data that is in flight to the remote host.  With high speed
internet connections the inflight limit frequently has been estimated
too low due to the noisy nature of the RTT measurements.

This code gives way for the upcoming pluggable congestion control
framework.  It is the task of the congestion control algorithm to
set the congestion window and amount of inflight data without external
interference.

Reviewed by:	lstewart
MFC after:	1 week
Removal after:	1 month
2010-08-14 20:40:55 +00:00
Bernhard Schmidt
ad8e331bf2 Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
should set this capability.

MFC after:	2 weeks
2010-08-14 20:12:10 +00:00
Doug Barton
a7112b557f Give people some warning before removing enable_quotas 2010-08-14 18:58:05 +00:00
Adrian Chadd
627e7864f1 A local addition, not imported from ath9k.
AR_PHY_CALMODE is explicitly reset on interface reset for other chipsets;
this commit also sets it for the AR9160.
2010-08-14 15:48:18 +00:00
Adrian Chadd
6a0c1a60c0 * Merge in AR9160 initval updates from Linux-2.6.34.
* Grab the AR_PHY_CCA and AR_PHY_EXT_CCA initvals from Linux wireless-testing.

Obtained from: Linux-2.6.34
2010-08-14 15:46:18 +00:00
Adrian Chadd
49d2d79b7a Merge in a fix for the power/(gain?) calculation. Apply it to both
the 5416/9160 and 9285 code paths.

Obtained from:	OpenWRT r22123, 522-ath9k_pwrcal_fix.patch
2010-08-14 15:29:21 +00:00
Adrian Chadd
8f279cf6e7 Fix the calibration logic to correctly clamp the calculated coefficient.
Obtained from:	OpenWRT r22123, 521-ath9k_iqcal_fix.patch
2010-08-14 15:28:15 +00:00
Dag-Erling Smørgrav
bbb2703b4f Simplify expand_number() by combining the (unrolled) loop with the
switch.  Since expand_number() does not accept negative numbers, switch
from int64_t to uint64_t; this makes it easier to check for overflow.

MFC after:	3 weeks
2010-08-14 14:34:36 +00:00
Adrian Chadd
e8dabfbea9 Export ath stats via snmp, rather than requiring a debugging interface
and "athstats".
2010-08-14 14:18:02 +00:00
Bjoern A. Zeeb
8c09aa57d9 In rip6_input(), in case of multicast, we might skip the normal processing
and go to the next iteration early if multicast filtering would decide that
this socket shall not receive the data.
Unlock the pcb in that case or we leak the read lock and next time trying
to get a write lock, would hang forever.

PR:		kern/149608
Submitted by:	Chris Luke (chrisy flirble.org)
MFC after:	3 days
2010-08-14 14:13:44 +00:00
Adrian Chadd
7ec4e6b83b Add a global counter of missed beacons.
The existing missed beacon count is reset once a beacon isn't missed.
2010-08-14 14:01:12 +00:00
Bernhard Schmidt
49d2c13794 Initialize ni_txrate after txparams have been setup. Some drivers
calculate various things prior to association based on ni_txrate and
rely on it being nonzero.

PR:		kern/149185
MFC after:	2 weeks
2010-08-14 09:29:42 +00:00
Jung-uk Kim
0405a5efe7 Reset switchtime to zero rather than the current CPU ticker (TSC) value.
It is more appropriate in this context because TSC MSR is reset to zero
when the CPU is restarted from S3 and above.  Move acpi_resync_clock() back
to where it was before r211202.  It does not make a difference any more.
2010-08-13 22:08:42 +00:00
Jung-uk Kim
4a2637c486 Consistently use full pathnames for external commands. 2010-08-13 21:23:13 +00:00
Pawel Jakub Dawidek
ea9ba9fe93 - Use loops to avoid code duplication.
- More tests.
2010-08-13 21:17:59 +00:00
Jung-uk Kim
ca988da3ca Do not fork a subshell unnecessarily. 2010-08-13 21:04:43 +00:00
Jung-uk Kim
ed82feee0c Enforce ACPI timer as the timecounter hardware before we change sleep state
unless it is the current timer.  When we have resumed successfully, restore
the previous timecounter hardware if it was changed earlier.  Only the ACPI
timer is guaranteed to increase monotonically between S-state changes.
2010-08-13 20:43:19 +00:00
Jilles Tjoelker
c5e4fa998d sh: Add a forgotten const. 2010-08-13 20:29:43 +00:00
Joel Dahl
4f76d548c9 Fix typo. 2010-08-13 20:27:40 +00:00
Pyun YongHyeon
5bec76e720 Make sure to disable RX MAC in alc_stop_mac(). Previously there
was a logic error which it always enabled RX MAC.
2010-08-13 19:39:33 +00:00
Pawel Jakub Dawidek
3d336cd03b Simplify taskqueue_drain() by using proved macros. 2010-08-13 19:20:35 +00:00
Marko Zec
d3c351c50f When moving an ethernet ifnet from one vnet to another, destroy the
associated ng_ether netgraph node in the current vnet, and create a
new one in the target vnet.

Reviewed by:	julian
MFC after:	3 days
2010-08-13 18:17:32 +00:00
Matt Jacob
e02616caf0 Avoid a memory leak.
Submitted by:	Dmitry Luhtionov via Alexander Motin
MFC after:	1 week
2010-08-13 15:17:19 +00:00
Jilles Tjoelker
92378cce77 sh: Fix shadowing of sigset. 2010-08-13 13:36:18 +00:00
Jayachandran C.
a7834bac09 Rename TARGET_XLR_XLS to CPU_RMI to match other CPU_xxx definitions.
use CPU_RMI all XLR configurations. Update ident string for N32 and
N64 kernels.
2010-08-13 12:56:00 +00:00
Takanori Watanabe
977fd9da57 use uintmax_t instead of uint64_t.
Pointed out by: des.
2010-08-13 09:58:17 +00:00
Hajimu UMEMOTO
225edeac51 - When there is no room for returning the result, nss backend
have to return ERANGE and terminate with NS_RETURN.
- When gethostbyname_r(3) and the friends end with an error,
  set errno to the value nss backend returns, and return errno
  value.

PR:		kern/131623
MFC after:	2 weeks
2010-08-13 06:39:54 +00:00
Takanori Watanabe
34d9d01f86 Hook tpm.4 manual to hook. 2010-08-13 05:01:44 +00:00
Takanori Watanabe
f8645c900b Hook tpm.4 manual to build. 2010-08-13 04:00:35 +00:00
Takanori Watanabe
0e1982f4df Fix build on amd64 and ia64. 2010-08-13 00:45:30 +00:00
Warner Losh
c02b504229 This depends on ACPI, so only build on i386:i386, amd64:amd64 and
ia64:ia64.  It can't possibly work on pc98, or any of the embedded
platforms, since they lack ACPI.
2010-08-12 22:46:31 +00:00
Ivan Voras
c491a612fd Describe vfs.read_max and update vfs.hirunningspace documentation. While
there, update nits.

Considered viewed by:	jeff, phk, rwatson
2010-08-12 21:21:50 +00:00