handle_ddp_close.
This eliminates a bad race where an aio_ddp_requeue that happened to run
after handle_ddp_close could bump up the active count.
Discussed with: jhb@
MFC after: 3 days
Sponsored by: Chelsio Communications
t_maxseg was changed in r293284 to not have any adjustment for TCP
timestamps. t4_tom inadvertently went back to pre-r293284 semantics
in r332506.
Sponsored by: Chelsio Communications
This fixes (userspace) console on the Marvell MACCHIATObin in ACPI mode with
latest TianoCore EDK2 firmware.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: mw, bcran
Differential Revision: https://reviews.freebsd.org/D20765
This lets PCIe MSI-X device interrupts work on the MACCHIATObin
(Marvell Armada 8k), which allows e.g. the Intel igb NIC to fully work.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: mw, bcran
Differential Revision: https://reviews.freebsd.org/D20775
This adds defines for the RISC-V specific e_flags values, and some of
the missing static relocations.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20766
A future patch that will add a Linux compatible copy_file_range(2) syscall
needs to be able to lock the byte ranges of two files concurrently.
To do this without a risk of deadlock, a non-blocking variant of
vn_rangelock_rlock() called vn_rangelock_tryrlock() was needed.
This patch adds this, along with vn_rangelock_trywlock(), in order to
do this.
The patch also adds a couple of comments, that I hope clarify how the
algorithm used in kern_rangelock.c works.
Reviewed by: kib, asomers (previous version)
Differential Revision: https://reviews.freebsd.org/D20645
r160875 added sbdestroy() as a wrapper around sbrelease_internal to be
called from sofree(), yet the comment added in the same revision to
sofree() still mentions sbrelease_internal().
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20488
To avoid failures when the large 18MB nvidia.ko module is being loaded,
increase EFI_STAGING_SIZE from 64MB to 100MB on x64 systems.
Leave the other platforms at 64MB.
After r348611 the kernel's build-ID is available via sysctl. Add a -b flag
to uname to report it.
Submitted by: Ali Mashtizadeh <ali_mashtizadeh.com>
Reviewed by: markj, imp
Relnotes: Yes
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20511
Previously, the aiotx task relied on the aio jobs in the queue to hold
a reference on the socket. However, when the last job is completed,
there is nothing left to hold a reference to the socket buffer lock
used to check if the queue is empty. In addition, if the last job on
the queue is cancelled, the task can run with no queued jobs holding a
reference to the socket buffer lock the task uses to notice the queue
is empty.
Fix these races by holding an explicit reference on the socket when
the task is queued and dropping that reference when the task
completes.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20539
The format to use depends on hardware configuration (synthesis-time),
so make it compile-time kernel option.
Extended format allows DMA engine to operate with 64-bit memory addresses.
Sponsored by: DARPA, AFRL
"pin_list" allows to specify child pins as a list of pin numbers.
Existing hint "pins" serves the same purpose but with a 32-bit wide bit
mask. One problem with that is that a controller can have more than 32
pins. One example is amdgpio. Also, a list of numbers is a little bit
more human friendly than a matching bit mask. As a side note, it seems
that in FDT pins are typically specified by their numbers as well.
This commit also adds accessors for instance variables (IVARs) that
define the child pins. My primary goal is to allow a child to be
configured programmatically rather than via hints (assuming that FDT is
not supported on a platform). Also, while a child should not care about
specific pin numbers that are allocated to it, it could be interested in
how many were actually assigned to it.
While there, I removed "flags" instance variable. It was unused.
Reviewed by: mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20459
bectl advertises that it has the ability to create recursive and
non-recursive boot environments. This patch implements that functionality
using the be_create_depth API provided by libbe. With this patch, bectl now
works as bectl(8) describes in regards to creating recursive/non-recursive
boot environments.
Submitted by: Rob Fairbanks <rob.fx907 gmail com> (with minor changes)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20240
PR/238816 initially addressed updates to usage() however the PR has
morphed into a shopping list of updates to usage() and man pages.
PR: 238816 (I added to the list during discussion)
MFC after: 1 week
PR/238816 initially addressed updates to usage() however it has now
become a shopping list of fixes to ipmon man pages and usage().
PR: 238816
MFC after: 3 days
Since we can now add OpenPGP trust anchors at runtime,
ensure the latent support is available.
Ensure we do not add duplicate keys to trust store.
Also allow reporting names of trust anchors added/revoked
We only do this for loader and only after initializing trust store.
Thus only changes to initial trust store will be logged.
Reviewed by: stevek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20700
copy the VFP registers.
arvm7 VFP uses 32 64bits fp registers (but those could be used in pairs to
make 16 128bits registers), while aarch64 uses 32 128bits fp registers, so
we have to copy the value of each register.
that replaced a pmap_invalidate_page() with a dsb(ishst) in
pmap_enter_quick_locked(). Even though this change is in principle
correct, I am seeing occasional, spurious bus errors that are only
reproducible without this pmap_invalidate_page(). (None of adding an
isb, "upgrading" the dsb to wait on loads as well as stores, or
disabling superpage mappings eliminates the bus errors.) Add an XXX
comment explaining why the pmap_invalidate_page() is being performed.
Discussed with: andrew, markj
This adds emulation for:
test r/m16, imm16
test r/m32, imm32
test r/m64, imm32 sign-extended to 64
OpenBSD guests compiled with clang 8.0.0 use TEST directly against a
Local APIC register instead of separate read via MOV followed by a
TEST against the register.
PR: 238794
Submitted by: jhb
Reported by: Jason Tubnor jason@tubnor.net
Tested by: Jason Tubnor jason@tubnor.net
Reviewed by: markj, Patrick Mooney patrick.mooney@joyent.com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20755
Otherwise they are leaked, allowing an attacker to trigger memory
exhaustion.
This is options.c rev. 1.70 from OpenBSD.
admbugs: 552
Obtained from: OpenBSD
MFC after: 3 days
A mixture of IP or UDP packets with valid and invalid checksum could
cause {ip,udp}_packets_bad_checksum to wrap around to 0, resulting
in a division by zero.
This is packet.c rev. 1.27 from OpenBSD.
admbugs: 552
Obtained from: OpenBSD
MFC after: 3 days
Use it to indicate whether the page may be safely freed following
its removal from the object. Also change vm_page_remove() to assume
that the page's object pointer is non-NULL, and have callers perform
this check instead.
This is a step towards an implementation of an atomic reference counter
for each physical page structure.
Reviewed by: alc, dougm, kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20758
"fdt" is removed from the driver module name as the driver does not
require FDT and can work very well on hints based systems.
A module dependency is added for gpiobus. Without that owc cannot
resolve symbols in gpiobus if both are loaded as kernel modules.
Finally, a driver module module version is added.
Reviewed by: imp
MFC after: 11 days
When pmap_pkru_on_remove() is called, the sva argument value was
advanced. Clear PKRU earlier when sva still specifies the start of
the region.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
In set_regs32()/fill_regs32(), we have to get/set SP and LR from/to
tf_x[13] and tf_x[14].
set_regs() and fill_regs() may be called for a 32bits process, if the process
is ptrace'd from a 64bits debugger. So, in set_regs() and fill_regs(), get
or set PC and SPSR from where the debugger expects it, from tf_x[15] and
tf_x[16].
Previously we would perform a linear search of the DWARF section
list for ".debug_str". However, libdwarf always caches a pointer to
the strtab image in its debug descriptor. Using it gives a modest
performance improvement when iterating over the attributes of each
DIE.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20759
Use the input file's .shstrtab size as the hint if it exists. This
gives a small performance improvement when processing files with
many sections.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20544
The string's length is already known, so use memcpy() instead of
strcpy() to add it to the string table image.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20760
