r197512, r197513, r197514, r197515, r197525:
r197287:
Purge namecache for the file system being rolled back, so it doesn't point at
invalid vnodes after the rollback resulting in EIO errors when trying to access
files which are in the namecache.
Reported by: des
r197289:
Purge file system namecache when receiving incremental stream and rolling back
to it.
r197351:
Purge namecache in the same place OpenSolaris does.
r197426:
Restore BSD behaviour - when creating new directory entry use parent directory
gid to set group ownership and not process gid.
This was overlooked during v6 -> v13 switch.
PR: kern/139076
Reported by: Sean Winn <sean@gothic.net.au>
r197458:
Close race in zfs_zget(). We have to increase usecount first and then
check for VI_DOOMED flag. Before this change vnode could be reclaimed
between checking for the flag and increasing usecount.
r197459:
Before calling vflush(FORCECLOSE) mark file system as unmounted so the
following vnops will fail. This is very important, because without this change
vnode could be reclaimed at any point, even if we increased usecount. The only
way to ensure that vnode won't be reclaimed was to lock it, which would be very
hard to do in ZFS without changing a lot of code. With this change simply
increasing usecount is enough to be sure vnode won't be reclaimed from under
us. To be precise it can still be reclaimed but we won't be able to see it,
because every try to enter ZFS through VFS will result in EIO.
The only function that cannot return EIO, because it is needed for vflush() is
zfs_root(). Introduce ZFS_ENTER_NOERROR() macro that only locks
z_teardown_lock and never returns EIO.
r197497:
Switch to fletcher4 as the default checksum algorithm. Fletcher2 was proven to
be a bit weak and OpenSolaris also switched to fletcher4.
r197498: head/cddl/contrib/opensolaris
Fletcher4 is not the default checksum algorithm.
r197512:
- Don't depend on value returned by gfs_*_inactive(), it doesn't work
well with forced unmounts when GFS vnodes are referenced.
- Make other preparations to GFS for forced unmounts.
PR: kern/139062
Reported by: trasz
r197513:
Use traverse() function to find and return mount point's vnode instead of
covered vnode when snapshot is already mounted.
r197514:
On lookup error VFS expects *vpp to be set to NULL, be sure to do that.
r197515:
Handle cases where virtual (GFS) vnodes are referenced when doing forced
unmount. In that case we cannot depend on the proper order of invalidating
vnodes, so we have to free resources when we have a chance.
PR: kern/139062
Reported by: trasz
r197525:
Ensure that tv_sec is between INT32_MIN and INT32_MAX, so ZFS won't object.
This completes the fix from r185586.
PR: kern/139059
Reported by: Daniel Braniss <danny@cs.huji.ac.il>
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
Tested by: Daniel Braniss <danny@cs.huji.ac.il>
Approved by: re (kib)
- According to Linux, the ALi M5451 can do 31-bit DMA instead of just
30-bit like the reset of the controllers supported by this driver.
Actually ALi M5451 can be setup up to generate 32-bit addresses by
setting the 31st bit via the accompanying ISA bridge, which allows
it to work in sparc64 machines whose IOMMU require at least 32-bit
DMA. Even though other architectures would also benefit from 32-bit
DMA, enabling this bit is limited to sparc64 as bus_dma(9) doesn't
generally guarantee that a low address of BUS_SPACE_MAXADDR_32BIT
results in a buffer in the 32-bit range.
- According to Tatsuo YOKOGAWA's ali(4), the the DMA transfer size of
ALi M5451 is fixed to 64k and in fact using the default size of 4k
causes the chip to overrun the mapping, triggering uncorrectable
DMA errors on sparc64.
- The 4DWAVE DX and NX require the recording buffer to be 8-byte
aligned so adjust the bus_dma_tag_create(9) accordingly.
- Unlike the rest of the controllers supported by this driver, the
ALi M5451 only has 32 hardware channels instead of 64 so limit the
loop in tr_intr() accordingly. [1]
Submitted by: yongari [1]
Reviewed by: yongari (superset of what is committed)
Approved by: re (kib)
alignment requirements. It is busdma task, to manage proper alignment by
loading data to bounce buffers.
PR: kern/127316
Reviewed by: current@
Tested by: Ryan Rogers
Approved by: re (kib)
Do not call BUS_DRIVER_ADDED() for detached buses (attach failed) on
driver load. This fixes crash on atapicam module load on systems, where
some ata channels (usually ata1) was probed, but failed to attach.
Reviewed by: jhb, imp
Tested by: many
Approved by: re (kib)
the work area was totally unsynchronized which means this driver only
had a chance of working on x86 when no bounce buffers were involved,
which isn't that likely given that support for 64-bit DMA is currently
broken throughout ata(4).
- Add necessary little-endian conversion of accesses to the work area,
making this driver work on big-endian hosts. While at it, use the
alignment-agnostic byte order encoders in order to be on the safe side.
- Clear the reserved member of the SG list entries in order to be on the
safe side. [1]
Submitted by: yongari [1]
Reviewed by: yongari
Approved by: re (kib)
The elements in the component arrays may be direct Package objects rather
than references to objects. In that case, simply use the Package directly.
Approved by: re (kib)
- Split the logic to parse an SMAP entry out into a separate function on
amd64 similar to i386. This fixes a bug on amd64 where overlapping
entries would not cause the SMAP parsing to stop.
- Change the SMAP parsing code to do a sorted insertion into physmap[]
instead of an append to support systems with out-of-order SMAP entries.
Approved by: re (kib)
Don't reread the command register to see if enabling I/O or memory
decoding "took". Other OS's that I checked do not do this and it breaks
some amdpm(4) devices. Prior to 7.2 we did not honor the error returned
when this failed anyway, so this in effect restores previous behavior.
Approved by: re (kib)
cr_groups is no longer embedded in struct ucred and is instead stored
in a seperate array. As such we need to use kvm_read rather than bcopy
to populate the ki_groups field.
This fixes a crash when running ps -ax on a coredump.
Reported by: brucec
Tested by: brucec
MFC after: 3 days
Approved by: re@ (kib)
Allocate space for the group array in a static credential used in
the quota code. One case was correctly handled in r194498, but
this one was missed.
PR: kern/138657
Tested by: PR submitter
MFC after: 3 days
Approved by: re@ (kib)
The buffer returned by fgetln is not a "C" string and might not be NUL
terminated. Make sure that it is before using it.
Reviewed by: marck@
Approved by: re (kib)
Revision: 197322
Log:
Correct BIOS header sanitizing on pc98.
Revision: 197374
Log:
Disable a check on a disk size because it's too strict. This change is
to avoid using incorrect geometry.
It seems that this is the same problem in g_part_bsd_read()@g_part_bsd.c.
Reviewed by: rink
Approved by: re (kib)
Let fall down in the hard path (thus handling shared waiters wakeup
correctly) for the shared waiters also in the rwlock held in shared mode
as well, fixing possible deadlocks.
Please note that this is a special condition as we want this fix in
before RC2 as we assume it is critical and so it has been handled
as an instant-merge. For the STABLE_7 branch, 1 week before the MFC
is assumed.
Approved by: re (kib)
Re-remove the IBM0057 ID used for PS/2 mouse controllers. The asl for the
61p includes the hotkey device as IBM0068 and the mouse as IBM0057 similar
to other systems.
Approved by: re (kensmith)
- Update the list of known-working machines based on feedback for 7.2.
- Update the V440 entry regarding added support for the on-board NICs
in 8.0.
Approved by: re (kib), blackend
Make the sudden motion sensor work on older models and add a bit of
debugging.
Submitted by: Christoph Langguth <christoph at rosenkeller.org>
Approved by: re (kib)
A wrong variable is used when setting up the interface
address route, which broke source address selection in
some code paths.
Submitted by: noted by bz
Reviewed by: hrs
Approved by: re (kib)
Different sub-kinds of PCI buses may have different rules and
thus it is up for the bus backends to do proper input checks.
For example, PCIe allows configuration register numbers < 0x1000,
while for PCI proper the limit is 0x100.
And, in fact, the buses already do the checks.
Reviewed by: jhb
Approved by: re (kib)
Add a few SCSI controllers to GENERIC that can be found in Powermacs.
This allows installation onto SCSI disks as shipped, for example,
as an option with the Powermac G3.
PR: powerpc/138543
Reviewed by: grehan
Approved by: re (kib)
Obtained from: sparc64
Remove some debugging (KTR_VERBOSE) that crept into ppc GENERIC long ago
and is present on no other architectures by default.
Reviewed by: grehan
Approved by: re (kib)
Fix some instances where CAM rescans get hung up or take a long time to
complete.
Also, allow xpt_rescan() to rescan a LUN instead of a full bus.
Sponsored by: Copan Systems, Inc.
Approved by: re (kib)
Fixes to mcast userland API.
--
Fix an API issue in leave processing for IPv4 multicast groups.
* Do not assume that the group lookup performed by imo_match_group()
is valid when ifp is NULL in this case.
* Instead, return EADDRNOTAVAIL if the ifp cannot be resolved for the
membership we are being asked to leave.
Caveat user:
* The way IPv4 multicast memberships are implemented in the inpcb layer
at the moment, has the side-effect that struct ip_moptions will
still hold the membership, under the old ifp, until ip_freemoptions()
is called for the parent inpcb.
* The underlying issue is: the inpcb layer does not get notification
of ifp being detached going away in a thread-safe manner.
This is non-trivial to fix.
--
Fix an obvious logic error in the IPv4 multicast leave processing,
where the filter mode vector was not updated correctly after the leave.
--
Tighten input checking in inp_join_group():
* Don't try to use the source address, when its family is unspecified.
* If we get a join without a source, on an existing inclusive
mode group, this is an error, as it would change the filter mode.
Fix a problem with the handling of in_mfilter for new memberships:
* Do not rely on imf being NULL; it is explicitly initialized to a
non-NULL pointer when constructing a membership.
* Explicitly initialize *imf to EX mode when the source address
is unspecified.
This fixes a problem with in_mfilter slot recycling in the join path.
--
Don't allow joins w/o source on an existing group.
This is almost always pilot error.
We don't need to check for group filter UNDEFINED state at t1,
because we only ever allocate filters with their groups, so we
unconditionally reject such calls with EINVAL.
Trying to change the active filter mode w/o going through IP_MSFILTER
is also disallowed.
Deals with the case described in PR 137164 upfront, cumulative
with the fix in svn rev 197132 which only calls imo_match_source()
if the source address family was not unspecified.
--
Revision 197136 has a text conflict, however it is a comment only change.
PR: 137164, 138689, 138690, 138691
Submitted by: Stef Walter (with fixups)
Approved by: re (kib)
(incorrect handling of zero-length reads before the copy buffer is
allocated) is masked by the iso9660 taster. Tar and cpio both enable
that taster so were protected from the bug; unzip is susceptible.
This both fixes the bug and updates the test harness to exercise
this case.
Submitted by: Ed Schouten diagnosed the bug and drafted a patch
Approved by: re (kib)
- Prevent a panic on modern controllers by increasing CISS_MAX_PHYSTGT to 256
- Fix MSI and PERFORMANT interrupt programming. Fixes hang on boot.
- Fix locking bugs in ioctl handler
Most of this has been soaking at Yahoo for several months, if not longer. The
quick MFC is due to the impending 8.0-RC1 build.
Approved by: re
Obtained from: Yahoo!
Fix a bug reported by Daniel Mentz:
When authenticating DATA chunks some DATA chunks
might get stuck when the MTU gets decreased via
an ICMP message.
Approved by: re, rrs (mentor)
1) A lock issue, if we ever had to try again
we would double lock the INP lock.
2) We were allowing (at wrap) associd 0... which really
we cannot allow since 0 normally means in most socket
API calls that we are wishing to effect something on
the INP not TCB.
Approved by: re, rrs (mentor)
Calculate the amount of bytes to copy for select filedescriptor masks
taking into account size of fd_set for the current process ABI.
Approved by: re (kensmith)
Clean up Marvell platform code.
Introduce SheevaPlug support.
- The device is based on Marvell 88F6281 system on chip.
- More info about the platform at http://www.plugcomputer.org
- To build the FreeBSD kernel:
make buildkernel TARGET_ARCH=arm KERNCONF=SHEEVAPLUG
- Installation notes at: http://wiki.freebsd.org/FreeBSDMarvell
Submitted by: Michal Hajduk
Approved by: re (kib)
Obtained from: Semihalf
Self pointing routes are installed for configured interface addresses
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
Approved by: re
The bootp code installs an interface address and the nfs client
module tries to install the same address again. This extra code
is removed, which was discovered by the removal of a call to
in_ifscrub() in r196714. This call to in_ifscrub is put back here
because the SIOCAIFADDR command can be used to change the prefix
length of an existing alias.
r197235 reverts file nfs_vfsops.c
Reviewed by: kmacy
Approved by: re
This patch fixes the following issues:
- Routing messages are not generated when adding and removing
interface address aliases.
- Loopback route installed for an interface address alias is
not deleted from the routing table when that address alias
is removed from the associated interface.
- Function in_ifscrub() is called extraneously.
Reviewed by: gnn, kmacy, sam
Approved by: re
Previously local end of point-to-point interface is not reachable
within the system that owns the interface. Packets destined to
the local end point leak to the wire towards the default gateway
if one exists. This behavior is changed as part of the L2/L3
rewrite efforts. The local end point is now reachable within the
system. The inpcb code needs to consider this fact during the
address selection process.
Reviewed by: bz
Approved by: re
Use explicit int values for the device states in order to allow, if
necessary, in the future, adds of new states without breaking ABI
between revisions.
Please note that this is a special condition as we want this fix in
before RC1 as we assume it is critical and so it has been handled
as an instant-merge.
Approved by: re (kib)
Fix sched_switch_migrate() by assuming locks cannot be shared and a
deadlock between 3 different threads by acquiring both runqueue locks
when doing the migration.
Please note that this is a special condition as we want this fix in
before RC1 as we assume it is critical and so it has been handled
as an instant-merge. For the STABLE_7 branch, 1 week before the MFC
is assumed.
Approved by: re (kib)
The clear_remove() and clear_inodedeps() call vn_start_write(NULL, &mp,
V_NOWAIT) on the non-busied mount point. Unmount might free ufs-specific
mp data, causing ffs_vgetf() to access freed memory.
Busy mountpoint before dropping softdep lk.
Approved by: re (kensmith)
