sheet, RX filter should be disabled before programming.
Previously it was clearing wrong bits so RX filter was not
disabled in RX filter configuration.
Reported by: brad@OpenBSD.org
This allows the Grant-table code to attach directly to the xenpv bus,
allowing us to remove the grant-table initialization done in xenpv.
Sponsored by: Citrix Systems R&D
Mave the grant table code into the dev/xen folder in preparation for turning
it into a device using the newbus interface. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
When running as a Xen PVH Dom0 we need to add custom buses that override
some of the functionality present in the ACPI PCI Bus and the PCI Bus. We
currently override the ACPI PCI Bus, but not the PCI Bus, so add a new
override for the PCI Bus and share the generic functions between them.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
conf/files.amd64:
- Add the new files.
x86/xen/xen_pci_bus.c:
- Generic file that contains the PCI overrides so they can be used by the
several PCI specific buses.
xen/xen_pci.h:
- Prototypes for the generic overried functions.
dev/xen/pci/xen_pci.c:
- Xen specific override for the PCI bus.
dev/xen/pci/xen_acpi_pci.c:
- Xen specific override for the ACPI PCI bus.
o Move similar block/networking methods to common file
o Follow r275640 and correct MMIO registers width
o Pass value to MMIO platform_note method.
Sponsored by: DARPA, AFRL
There are two main parts to get it to work, 1) most of the register
accesses need to be word sized, other than the config register which
needs to be byte aligned, and 2) we don't need the platform driver
for this to work on the Foundation Model, allow it to be NULL.
Differential Revision: https://reviews.freebsd.org/D1240
Reviewed by: bryanv
Sponsored by: The FreeBSD Foundation
adapters. Set the pack boundary for T5 cards to be the same as the
PCIe max payload size. The chip likes it this way.
In this revision the driver allocate rx buffers that align on both
boundaries. This is not a strict requirement and a followup commit
will switch the driver to a more relaxed allocation strategy.
MFC after: 2 weeks
re-using a hardware propritary transfer descriptor, PTD, in USB host
mode. If the PTD's are recycled too quickly, it has been observed that
the hardware simply fails to schedule the requested job or resets
completely disconnecting all devices.
Always include the card human readable name. We support ~270 cards and
at ~20 bytes each, this bloats things by only ~5k. Retain the
PCMCIA_CARD vs PCMCIA_CARD_D distinction, though, in case this is
intolerable.
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Add support for GEOM direct completion. Depending on the benchmark,
this tends to give a ~30% improvement w.r.t IOPs and BW.
- Remove an invariants check in the strategy routine. This assertion
is caught later on by an existing panic.
- Rename and resort various related functions to make more sense.
MFC after: 1 month
sending not ready data:
o Add new flag to pru_send() flags - PRUS_NOTREADY.
o Add new protocol method pru_ready().
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
o Introduce a notion of "not ready" mbufs in socket buffers. These
mbufs are now being populated by some I/O in background and are
referenced outside. This forces following implications:
- An mbuf which is "not ready" can't be taken out of the buffer.
- An mbuf that is behind a "not ready" in the queue neither.
- If sockbet buffer is flushed, then "not ready" mbufs shouln't be
freed.
o In struct sockbuf the sb_cc field is split into sb_ccc and sb_acc.
The sb_ccc stands for ""claimed character count", or "committed
character count". And the sb_acc is "available character count".
Consumers of socket buffer API shouldn't already access them directly,
but use sbused() and sbavail() respectively.
o Not ready mbufs are marked with M_NOTREADY, and ready but blocked ones
with M_BLOCKED.
o New field sb_fnrdy points to the first not ready mbuf, to avoid linear
search.
o New function sbready() is provided to activate certain amount of mbufs
in a socket buffer.
A special note on SCTP:
SCTP has its own sockbufs. Unfortunately, FreeBSD stack doesn't yet
allow protocol specific sockbufs. Thus, SCTP does some hacks to make
itself compatible with FreeBSD: it manages sockbufs on its own, but keeps
sb_cc updated to inform the stack of amount of data in them. The new
notion of "not ready" data isn't supported by SCTP. Instead, only a
mechanical substitute is done: s/sb_cc/sb_ccc/.
A proper solution would be to take away struct sockbuf from struct
socket and allow protocols to implement their own socket buffers, like
SCTP already does. This was discussed with rrs@.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Call to the driver-specific ioctl used to process ioctl number
that will lead to the out-of-bounds access to the ioctl handler
array.
PR: 193367
Approved by: kib
MFC after: 1 week
This allows one to make a kernel module to tune the
number of queues before the driver loads.
This is needed so that a module at SI_SUB_CPU can set
tunables for these drivers to take. Otherwise getenv
is called too early by the TUNABLE macros.
Reviewed by: smh
Phabric: https://reviews.freebsd.org/D1149
Records with target_mode == 1 are allocated from the end of portdb, so it
seems logical to start search from the end not traverse whole array.
MFC after: 1 month
This was previously working by accident because BUSDMA_COHERENT_MEMORY has
always been set to strongly-ordered on arm. Now we're moving towards
normal-uncacheable (what might be called write-combining on other platforms)
and using the proper sync ops will be more important. Of course, that
opens the question of just what is the "proper" sync op for shared
concurrent dma access as opposed to accesses where the handoff of control
of the memory has well-defined sequence points that match the available
busdma sync operations.
ath kernel module:
sys/dev/ath/ath_hal/ar5212/ar5212_reset.c:2642:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
if (abs(lp[0] * EEP_SCALE - target) < EEP_DELTA) {
^
sys/dev/ath/ah_osdep.h:74:18: note: expanded from macro 'abs'
#define abs(_a) __builtin_abs(_a)
^
sys/dev/ath/ath_hal/ar5212/ar5212_reset.c:2642:7: note: remove the call to '__builtin_abs' since unsigned values cannot be negative
sys/dev/ath/ah_osdep.h:74:18: note: expanded from macro 'abs'
#define abs(_a) __builtin_abs(_a)
^
1 error generated.
This warning occurs because both lp[0] and target are unsigned, so the
subtraction expression is also unsigned, and calling abs() is a no-op.
However, the intention was to look at the absolute difference between
the two unsigned quantities. Introduce a small static function to
clarify what we're doing, and call that instead.
Reviewed by: adrian
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1212
isochronous endpoint descriptor used for the data transfers, hence the
synchronization feature might not be supposed to be supported [yet].
This makes seamless playback synced with the USB HOST clock work with
the DN32-USB module for Midas audio systems and possibly other similar
products from Klark Teknik.
MFC after: 1 week
SAF1761 OTG driver. Currently the driver logic is very simple and
double buffering the USB transactions is not done. Also you need to
use an external USB high speed USB HUB for reliable FULL speed
outgoing ISOCHRONOUS traffic, because the internal one chokes on
so-called split transfers above 188 bytes.
