Commit Graph

156461 Commits

Author SHA1 Message Date
yongari
a457681b2d pci(4) handles PCIM_CMD_INTxDIS so there is no need to poke this
bit in driver.
2009-05-20 03:33:27 +00:00
kmacy
879984a728 Add minimal ZFS lock hierarchy 2009-05-20 02:51:48 +00:00
brueffer
5742509236 Since audit(4) isn't based on posix1e, remove the commented out audit.h header,
xref libbsm(3).

Submitted by:	rwatson
MFC after:	3 days
2009-05-19 22:28:33 +00:00
gnn
abdd79e487 Fix a few style(9) nits.
Submitted by:	danfe
2009-05-19 20:16:18 +00:00
rwatson
9c1bc41813 With SMPng, DEVICE_POLLING uses its own idle threads, rather than the
system idle loop, to run ether_poll(), so make ether_poll() static.

MFC after:	1 week
2009-05-19 19:21:25 +00:00
sam
d72799b6d9 correct HAL_INT_BNR comment, this bit is mapped directly the h/w now 2009-05-19 17:54:32 +00:00
sam
74ad0d13c4 add TBTT interrupt support; this was added in Griffin so consumers should
check HAL_CAP_INTRMASK before using it

NB: didn't test 11n parts yet so supported only for 5212-class parts
2009-05-19 17:53:53 +00:00
sam
d0d8d4716c minor cleanup 2009-05-19 17:43:31 +00:00
gnn
b1a1ec0421 Add a new program, perror, which takes an errno as a command line argument
and outputs the associated textual message in the same way that
perror(3) would if called within a program.
2009-05-19 17:40:22 +00:00
sam
1fbbbacfdb remove special handling for BNR; it is direct mapped to the harwdare so
can be added to HAL_INT_COMMON except on the 5210 where it doesn't exist
2009-05-19 17:35:15 +00:00
sam
4bc0dcfe69 add HAL_CAP_INTRMASK to return the set of interrupts supported by the device 2009-05-19 17:30:13 +00:00
joel
ced59a6c96 Add Dell PowerEdge R200 and R300 to the hardware section. 2009-05-19 17:17:53 +00:00
sam
4e93a31511 AH_SUPPORT_TDMA is gone; ath now honors IEEE80211_SUPPORT_TDMA
Noticed by:	Jon Loeliger <jdl@jdl.com>
2009-05-19 14:51:48 +00:00
flz
74c918142d Skip @pkgdep if there's no argument.
Submitted by:	pav
MFC after:	1 week
2009-05-19 14:26:41 +00:00
avg
960bfa71a8 find: do not silently disable -L when -delete is used
First of all, current behavior is not documented and confusing,
and it can be very dangerous in the following sequence:
find -L . -type l
find -L . -type l -delete
(the second line is even suggested by find(1)).

Instead simply refuse to proceed when -L and -delete are both used.
A descriptive error message is provided.
The following command can be safely used to remove broken links:
find -L . -type l -print0 | xargs rm -0

To do:		update find(1)
PR:		bin/90687
Obtained from:	Anatoli Klassen <anatoli@aksoft.net>
Approved by:	jhb (mentor)
2009-05-19 14:23:54 +00:00
avg
89d59b82b3 sysctl_rman: report shared resources to devinfo
shared uses of a resource are recorded on a sub-list hanging off
a main resource object on a main resource list;
without this change a shared resource (e.g. irq) is reported only
once by devinfo -r/-u;
with this change the resource is reported for each driver that
allocates it (which is even more than what vmstat -i -a reports).

Approved by:	jhb (mentor)
2009-05-19 14:08:21 +00:00
trasz
678fe0aa03 Add links to libgeom(3) where appropriate. 2009-05-19 12:10:48 +00:00
dchagin
56c9819821 Validate user-supplied arguments values.
Args argument is a pointer to the structure located in user space in
which the socketcall arguments are packed. The structure must be
copied to the kernel instead of direct dereferencing.

Approved by:	kib (mentor)
MFC after:	1 week
2009-05-19 09:10:53 +00:00
scottl
ab6b6454c0 Updated PCI ID's from the vendor 2009-05-19 01:41:11 +00:00
kmacy
972fc5b174 - back out direct map hack
- it is no longer needed
2009-05-19 01:14:37 +00:00
delphij
d66d1a14b1 FILE has been upgraded from 4.23 to 5.03. 2009-05-18 22:46:59 +00:00
bz
f8a2471f8c Revert the logical change of r192341.
net.inet.ip.fw.one_pass is a classic ip_input.c variable and is used in
the pfil and bridge code as well. As ipfw is loadable we need to always
provide it.  That is the reason why it lives in struct vnet_inet and
not in struct vnet_ipfw.
2009-05-18 22:34:44 +00:00
delphij
94241912dc Merge vendor/file/dist@192348, bringing FILE 5.03 to 8-CURRENT.
Security:	CVE-2009-1515
2009-05-18 22:34:33 +00:00
delphij
862d9405b8 Virgin import of Christos Zoulas's FILE 5.03.
Security:	CVE-2009-1515
2009-05-18 22:27:42 +00:00
jhb
6048eaa315 - Add a tunable 'hw.mca.enabled' that can be used to enable/disable the
machine check code.  Disable it by default for now.
- When computing the mask of bits that determines a non-restartable event
  during a machine check exception, or-in the overflow flag rather than
  replacing the other flags.

PR:		i386/134586 [2]
Submitted by:	Andi Kleen  andi-fbsd firstfloor.org
2009-05-18 21:50:06 +00:00
jhb
b80bf31073 Add a read-only sysctl hw.pci.mcfg to mirror the tunable by the same name.
MFC after:	1 week
2009-05-18 21:47:32 +00:00
jhb
efa3503500 - Fix typo in description of 'net.inet.ip.fw.autoinc_step'.
- Use 'vnet_ipfw' instead of 'vnet_inet' for 'net.inet.ip.fw.one_pass'.
2009-05-18 21:46:46 +00:00
rmacklem
29fae940fc Change the experimental NFSv4 client so that it does not do
the NFSv4 Close operations until ncl_inactive(). This is
necessary so that the Open StateIDs are available for doing
I/O on mmap'd files after VOP_CLOSE(). I also changed some
indentation for the nfscl_getclose() function.

Approved by:	kib (mentor)
2009-05-18 21:22:03 +00:00
jhb
f5760f10df Bump CACHE_LINE_SIZE to 128 for x86. Intel's manuals explicitly recommend
using 128 byte alignment for locks.  (See IA-32 SDM Vol 3A 7.11.6.7)
2009-05-18 19:33:59 +00:00
sam
0ed2b1e0b5 add block ack frame id 2009-05-18 19:02:55 +00:00
marcel
29c02c1386 Rename ia64_invalidate_icache() to ia64_sync_icache(). We're
not invalidating anything.
2009-05-18 18:44:54 +00:00
marcel
8b09116a5a Add cpu_flush_dcache() for use after non-DMA based I/O so that a
possible future I-cache coherency operation can succeed. On ARM
for example the L1 cache can be (is) virtually mapped, which
means that any I/O that uses temporary mappings will not see the
I-cache made coherent. On ia64 a similar behaviour has been
observed. By flushing the D-cache, execution of binaries backed
by md(4) and/or NFS work reliably.
For Book-E (powerpc), execution over NFS exhibits SIGILL once in
a while as well, though cpu_flush_dcache() hasn't been implemented
yet.

Doing an explicit D-cache flush as part of the non-DMA based I/O
read operation eliminates the need to do it as part of the
I-cache coherency operation itself and as such avoids pessimizing
the DMA-based I/O read operations for which D-cache are already
flushed/invalidated. It also allows future optimizations whereby
the bcopy() followed by the D-cache flush can be integrated in a
single operation, which could be implemented using on-chips DMA
engines, by-passing the D-cache altogether.
2009-05-18 18:37:18 +00:00
sam
c6c2784575 fix typo 2009-05-18 18:12:45 +00:00
bz
480a4f648d Add two missing INIT_VNET_INET6(curvnet) to make VIMAGE kernels happier. 2009-05-18 17:48:46 +00:00
kan
35f48e9de6 Remove empty files and do nto try to build them.
Apparently, they are problematic for CTF users.

PR:	119298
Submitted by: Julian H. Stacey
2009-05-18 17:20:24 +00:00
sam
f487a64e06 add bpf_track eventhandler for monitoring bpf taps attached/detached
Reviewed by:	csjp
2009-05-18 17:18:40 +00:00
emax
da0f75294f Teach btpand(8) to recognized Bluetooth device node names.
Tested by:	Daniel O'Connor <doconnor -at- gsoft -dot- com -dot- au>
MFC after:	3 days
2009-05-18 16:00:18 +00:00
imp
1af3a5b3ea Remove unnecessary comments. 11A read/write is the same: its just the
classic indirect register dance.

Submitted by:	ddkprog at yahoo not com
2009-05-18 15:46:34 +00:00
imp
a8ab9edd25 Fix a typo from the original driver. We need to write ctrl2 into RF
register 0x52, not ctrl1.  This appears to be a mistake in the bcm
reverse engineering page, and has been corrected there.  Tracing
through the code, this is more in keeping with the "documented"
register. Sephe thinks it looks interesting and may be worth
fixing. :)

Submitted by:	ddkprog at yahoo com
Reviewed by:	Sepherosa Ziehau
2009-05-18 15:31:26 +00:00
rwatson
d9e163e093 Binding interrupts to a CPU consists of two parts: setting up CPU
affinity for the interrupt thread, and requesting that underlying
hardware direct interrupts to the CPU.  For software interrupt
threads, implement a no-op interrupt event binder that returns
success, so that the interrupt management code will just set the
ithread's affinity and succeed.

Reviewed by:	jhb
MFC after:	1 week
2009-05-18 14:02:55 +00:00
ed
a6c06ba89c Mark the clock sysctls as MPSAFE.
These sysctls don't need any form of locking. At least cp_times is used
by powerd very often, which means I get 50% less calls to non-MPSAFE
sysctls on my system. The other 50% is consumed by dev.cpu.0.freq, but
this seems to need Giant for Newbus.
2009-05-18 12:03:43 +00:00
brueffer
87f3af3d09 Remove license clauses 3 and 4 as per rev. 1.2 from NetBSD.
Also, FreeBSD 8.0 will be the first release including this driver. (1)

PR:		134093 (1)
Submitted by:	gavin
2009-05-18 11:23:15 +00:00
rwatson
2e8fb1cbcc Garbage collect unused NETISR_{ATM,NETGRAPH,PPP} netisr constants. 2009-05-18 10:33:23 +00:00
yongari
bc530179c2 Remove extra parenthesis used in macros. These macros are not used
in driver, though.
2009-05-18 07:13:42 +00:00
yongari
3ea9ab3be1 Consistently use tab characters instead of spaces. 2009-05-18 07:10:48 +00:00
yongari
be6ab337f6 style(9) 2009-05-18 07:04:03 +00:00
yongari
cd2705d8b1 s/u_int8_t/uint8_t/g
s/u_int16_t/uint16_t/g
s/u_int32_t/uint32_t/g
2009-05-18 06:32:38 +00:00
yongari
b90105a973 style(9) - space after keyword. 2009-05-18 06:19:17 +00:00
yongari
4c334a387a Remove return statement at the end of functions that return void. 2009-05-18 06:13:56 +00:00
yongari
d5a2c288e6 Remove trailling whitespaces. 2009-05-18 06:09:10 +00:00