* add support to read the timer and capability
* add support to enable/disable the location timer.
On AR9380 at least, enabling the location timer is required to make
the timer tick, otherwise location packets return a timestamp of 0.
However, it then makes /all/ RX packets use the RX location timestamp
instead of the TSF timestamp.
So, unless I find another magical way to do location timestamping,
we will have to dynamically switch things on/off and ensure the
TX/RX path handles the "different" timestamps correctly.
Tested:
* AR9380, STA mode
* LOC_INFO is mostly just "did this packet come with a locationing
timestamp instead of TSF";
* Decode not-sounding, uploaded-data, data-valid, data type and
number of extension spatial streams.
* If fast_ts is set then the TX timestamp is the fast timestamp, not
normal TSF.
* If the TX descriptor has the position bit set then request locationing
and clear sounding-disable. This way we (a) get the response with
the TX timestamp from the location side of things, and (b) we get
a CSI dump of the response ACK, which we will eventually use in the
locationing path.
* the code already stored the length of the RX desc, which I never used.
So, use that and retire the new flag I introduced a while ago.
* Introduce a TX timestamp length field and capability.
It was useless before, but may improve performance now if multiple devices
are configured and guest supports this feature.
Sponsored by: iXsystems, Inc.
While old syntax is still supported, new syntax looks like this:
-s 3,ahci,hd:/dev/zvol/XXX,hd:/dev/zvol/YYY,cd:/storage/ZZZ.iso
Sponsored by: iXsystems, Inc.
This significantly reduces stack space requirements, and runtimes
require only native unwinding.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The key improvement is that it may be built without cross-unwinding
support, which significantly reduces the stack space requirement.
MFC after: 1 week
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7123
It turns out that this value is not used within the system call code
under normal conditions, except when using tracing tools like ktrace.
If we forget to set this value, it is set to random garbage. This may
cause ktrace to hang indefinitely, making it impossible to kill.
Reported by: Michael Plass
PR: 210800
MFC before: 11.0-RELEASE
* extend the TX timestamp to 32 bits, as the AR5416 and later does a full
32 bit TX timestamp instead of 15 or 16 bits.
* add RX descriptor fields for PHY uploaded information (coming soon)
* add flags for RX/TX fast timestamp, hardware upload, etc
* add a flag for TX to request ToD/ToA location information.
It looks like these sysctls were copy-pasted from netmap. Most were changed
from 'ixl_' prefix to 'iflib_', but this one was missed.
Fix the "can't re-use a leaf (ixl_rx_miss_bufs)!" warning.
Reported by: dim@ and others
Sponsored by: EMC / Isilon Storage Division
lang/gcc{48,49,5} lacks -fformat-extensions support (causing build errors, which
is what prompted r302403 to be committed). devel/amd64-gcc on the other hand
(which is used by Jenkins), has the support.
This fixes the Jenkins failure emails due to excessive warnings being produced
with "make buildkernel".
Discussed with: lwhsu
Reported by: Jenkins (FreeBSD_HEAD_amd64_gcc job)
Sponsored by: EMC / Isilon Storage Division
Ports versions of gcc do not have -fformat-extensions support.
This unbreaks compiling the kernel/modules with non-base gcc (4.8,
5.0, etc) if MK_FORMAT_EXTENSIONS=yes (the default).
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7150
Reviewed by: bdrewery
Sponsored by: EMC / Isilon Storage Division
Incorrect sign expansion in variables that supposed to be a bit fields
caused infinite loop. Fixing this allows system properly detect maximal
possible 32 devices configured on AHCI HBA of BHyVe. That case did not
happen in a wild before due to lack of hardware AHCI HBAs with 32 ports.
Approved by: re (gjb@)
MFC after: 1 week
Since r302216, thread suspension causes advisory file locks to restart
(instead of continuing to wait) and for a long time SA_RESTART has
affected advisory file locks. These are both not compliant to POSIX.1.
To clarify that restarting means something, add a paragraph about fair
queuing. Note that the network lock manager does not implement fair
queuing.
Reviewed by: kib (previous version)
Approved by: re (gjb)
vm_offset_t. (This field is used to detect sequential access to the virtual
address range represented by the map entry.) There are three reasons to
make this change. First, a vm_offset_t is smaller on 32-bit architectures.
Consequently, a struct vm_map_entry is now smaller on 32-bit architectures.
Second, a vm_offset_t can be written atomically, whereas it may not be
possible to write a vm_pindex_t atomically on a 32-bit architecture. Third,
using a vm_pindex_t makes the next_read field dependent on which object in
the shadow chain is being read from.
Replace an "XXX" comment.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
Found by the Debian reproducible builds effort -- Debian bug 830259.
Reported by: Reiner Herrmann <reiner@reiner-h.de>
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Sometimes the software loses the race when appending more descriptors to
the tx ring and the tx queue stops.
This commit detects this condition and restart the tx queue whenever it stall.
Tested by: sobomax@, Keith White <kwhite@site.uottawa.ca>,
Paul Mather <paul@gromit.dlib.vt.edu>
Sponsored by: Rubicon Communications (Netgate)
Approved by: re (kib)
of CPUs present. On amd64 this unbreaks the boot for systems with 92 or
more CPUs; the limit will vary on other systems depending on the size of
their uma_zone and uma_cache structures.
The major consumer of pages during UMA startup is the 19 zone structures
which are set up before UMA has bootstrapped itself sufficiently to use
the rest of the available memory: UMA Slabs, UMA Hash, 4 / 6 / 8 / 12 /
16 / 32 / 64 / 128 / 256 Bucket, vmem btag, VM OBJECT, RADIX NODE, MAP,
KMAP ENTRY, MAP ENTRY, VMSPACE, and fakepg. If the zone structures occupy
more than one page, they will not share pages and the number of pages
currently needed for startup is 19 * pages_per_zone + N, where N is the
number of pages used for allocating other structures; on amd64 N = 3 at
present (2 pages are allocated for UMA Kegs, and one page for UMA Hash).
This patch adds a new definition UMA_BOOT_PAGES_ZONES, currently set to 32,
and if a zone structure does not fit into a single page sets boot_pages to
UMA_BOOT_PAGES_ZONES * pages_per_zone instead of UMA_BOOT_PAGES (which
remains at 64). Consequently this patch has no effect on systems where the
zone structure fits into 2 or fewer pages (on amd64, 59 or fewer CPUs), but
increases boot_pages sufficiently on systems where the large number of CPUs
makes this structure larger. It seems safe to assume that systems with 60+
CPUs can afford to set aside an additional 128kB of memory per 32 CPUs.
The vm.boot_pages tunable continues to override this computation, but is
unlikely to be necessary in the future.
Tested on: EC2 x1.32xlarge
Relnotes: FreeBSD can now boot on 92+ CPU systems without requiring
vm.boot_pages to be manually adjusted.
Reviewed by: jeff, alc, adrian
Approved by: re (kib)
any open vnodes before proceeding. Make autounmound(8) use this flag.
Without it, even an unsuccessfull unmount causes filesystem flush,
which interferes with normal operation.
Reviewed by: kib@
Approved by: re (gjb@)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7047
