It is possible that ifma_protospec becomes NULL in this function for
some entry, but it is still referenced and thus it will not unlinked
from the list. Then "restart" condition triggers and this entry with
NULL ifma_protospec will lead to page fault.
PR: 228982
This controller have a special mode for RX to help with smbus-like transfer
when the controller will automatically send the slave address, register address
and read the data. Use it when possible.
The same mode for TX is describe is the datasheet but is broken and have been
since ~10 years of presence of this controller in RockChip SoCs.
Attach this driver early at we need it to communicate with the PMIC early in the
boot.
Do not hook it to the kernel build for now.
Add driver for the designware ethernet controller found in some RockChip SoCs.
The driver still rely on a lot of things setup by the bootloader like clocks
and phy mode.
But since netbooting is the only/easiest way to boot rockchip board at the
moment add the driver so other people can test/dev on thoses boards.
This was omitted in r334112 and r334996 which cause the PLL to not correctly
reparent, leaving the armclk to be derived from the APLL instead of the NPLL.
The arm core clock is now correctly set to 600Mhz via the assigned-clock present
in the DTB.
RockChip PLL have two modes controlled by a register, a "slow mode" (the
default one) where the frequency is derived from the 24Mhz oscillator on the
board, and a "normal" one when the pll take it's input from the real PLL output.
Default the mode to normal for all the PLLs.
This is the only node we are interested in so do not waste time to test
creating device that will be either unused or fail as most of the nodes
don't have a compatible string.
Rack with respect to its handling of TCP Fast Open. Several
fixes all related to TFO are included in this commit:
1) Handling of non-TFO retransmissions
2) Building the proper send-map when we are doing TFO
3) Dealing with the ack that comes back that includes the
SYN and data.
It appears that with this commit TFO now works :-)
Thanks Larry for all your help!!
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15758
Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camcontrol to define WITH_NVME
for those platforms where we support nvme.
This should fix the newly introduced nvme files to camcontrol
which were building everywhere.
Pointy Hat To: imp
Sponsored by: Netflix
Broken in r334514
sysctlbyname("vfs.zfs.compressed_arc_enabled", ...) would return ENOMEM
while trying to read the sysctl (a boolean_t) into a bool, which is too small.
Reviewed by: jhb (on irc)
Sponsored by: Klara Systems
Both ATA and NVME have an identify command. They are completely
different, but to the user they are the same. Leverage nvmecontrol's
print_controller code to provide that functionality to camcontrol
identify. Query the path to see what kind of protocol it supports, and
send the most appropriate command down. Refactor nvme_print_dev a
little to make it easy to get the nvme cdata.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
Rename print_controller to nvme_print_controller. Put it in its
own file for easy inclusion. Move util.c to be nc_util.c to not
conflict with camcontrol. add nvecontrol_ext.h to define shared
interfaces.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
Mark the PNP table, but still need to handle the CLASS / SUBCLASS /
REVID matching.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
The handbooks are not installed there anymore. While here, improve the
URLs markup a bit.
Reviewed by: allanjude@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15793
With compilers making increasing use of vector instructions the
performance benefit of lazily switching FPU state is no longer a
desirable tradeoff. Linux switched to eager FPU context switch some
time ago, and the idea was floated on the FreeBSD-current mailing list
some years ago[1].
Enable eager FPU context switch by default on amd64, with a tunable/sysctl
available to turn it back off.
[1] https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055198.html
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
Most kernel memory that is allocated after boot does not need to be
executable. There are a few exceptions. For example, kernel modules
do need executable memory, but they don't use UMA or malloc(9). The
BPF JIT compiler also needs executable memory and did use malloc(9)
until r317072.
(Note that a side effect of r316767 was that the "small allocation"
path in UMA on amd64 already returned non-executable memory. This
meant that some calls to malloc(9) or the UMA zone(9) allocator could
return executable memory, while others could return non-executable
memory. This change makes the behavior consistent.)
This change makes malloc(9) return non-executable memory unless the new
M_EXEC flag is specified. After this change, the UMA zone(9) allocator
will always return non-executable memory, and a KASSERT will catch
attempts to use the M_EXEC flag to allocate executable memory using
uma_zalloc() or its variants.
Allocations that do need executable memory have various choices. They
may use the M_EXEC flag to malloc(9), or they may use a different VM
interfact to obtain executable pages.
Now that malloc(9) again allows executable allocations, this change also
reverts most of r317072.
PR: 228927
Reviewed by: alc, kib, markj, jhb (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15691
