Commit Graph

47 Commits

Author SHA1 Message Date
sam
68f7a1034a Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
imp
d2adb03381 Minor tweaks to names and comments now that I understand what's going
on better.
2008-08-02 20:45:28 +00:00
sam
850b9c89c4 raw 802.11 packet transmit support
Submitted by:	Andrea Bittau <a.bittau@cs.ucl.ac.uk>
2006-08-05 04:58:25 +00:00
imp
4b319958e7 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
sam
c93326599e update radiotap support to reflect recent changes:
o add xmit rate
o drop rx time
o add rx flags
2003-12-28 06:58:52 +00:00
sam
61e32060eb o add experimental radiotap capture format
o add netbsd logic to convert rssi to device-independent values

Obtained from:	NetBSD (rssi conversion code)
2003-09-05 22:29:30 +00:00
sam
5b4673f435 new wi driver that uses the 802.11 link layer code
Reviewed by:	imp
Obtained from:	NetBSD (originally)
2003-01-15 20:11:31 +00:00
imp
2cf51225e1 o Comment out the symbol download code for 4.x.
o Add hooks for doing power management of the output signal.
o Minor hacks to make flexlint happy wrt staticness of functions.
2002-10-14 01:59:57 +00:00
imp
27340bd84b Fix comment 2002-09-29 18:42:14 +00:00
imp
2354dfe3ac Follow NetBSD's lead and use WI_PORTTYPE_HOSTAP instead of _AP, since
_AP might be used in the future for cards with firmware that does AP in
firmware.
2002-08-11 08:51:08 +00:00
imp
1e47b78a27 Fix minor typo in ID number in last commit 2002-08-05 07:48:31 +00:00
imp
c4f3562c5c A definition of regulatory domains that matches the docs. 2002-08-05 07:45:57 +00:00
imp
317f436475 Differentiate between AT45DB011 compatible large serial flash parts
and the AT24C08 small serial flash parts.  We still report these as
the same part (since we group things already), but now we recognize
the small serial versions as well.
2002-08-05 07:24:02 +00:00
imp
34834ad90e Add code that will download firmware to a Symbol LA4100-series of CF
cards.  Since the firmware is hard coded into the kernel, I've made it
a kernel option (WI_SYMBOL_FIRMWARE).

Note: This only downloads into the RAM of these cards.  It doesn't
download into FLASH, and is somewhat limited.  There needs to be a
better way to deal, but this works for now.  My Symbol LA4132 CF card
works now.

Obtained from: NetBSD
2002-08-03 00:19:58 +00:00
imp
5a5ffdbe70 Add kernel printf bits for WI_SUPPRATES and HOSTAP_FLAGS 2002-06-24 04:42:46 +00:00
imp
b07b8a3f99 Add better mediaopt support for ibss and friends.
Now the driver is closer to matching the wi man page.

Submitted by: jhay (who obtained it from OpenBSD).
2002-06-19 17:37:34 +00:00
imp
0b4ed14b52 Integrate the hostap stuff that Thomas Skibo <skibo@packbell.net>
wrote.  This code was for 4.5-release, so I've ported it to -current
and made a few minor tweaks.  The biggest non-style tweak was to not
make access point the default.

More changes will be needed to get this actually working, but I wanted
to get a relatively pure baseline.  This doesn't seem to break what
works now.
2002-04-11 07:21:16 +00:00
imp
34ccfc8f98 Sony ID is 0x0002, not 0x0001. Noticed by Ichiro Fukuhara-san when I
submitted patches to him for NetBSD integration.
2002-04-08 00:52:15 +00:00
imp
f2332be5f1 MFNetBSD:
wi.c 1.64: Table driven IDs (ichiro)
	1.59: Don't use magic numbers (ichiro)
Also, added Sony, Lucent Embedded Ids and fix minor bugs for lucent
cards (and submit those changes back to ichiro-san)

Obtained from: NetBSD
2002-04-04 21:40:37 +00:00
imp
002b206ef8 o Reduce the gratuitous differences with NetBSD.
o OpenBSD's wiconfig tells me that a value of '2' is for sony wireless
  cards, 1 is for lucent (which we already knew) and '5' is for embedded
  lucent cards.
o Move some RID definitions to if_wavelan_ieee.h and use NetBSD names
  more often.

# more work is still needed in this area.
2002-04-04 06:28:16 +00:00
imp
0b57062523 Four fixes from NetBSD:
1) Properly detect the Symbol based cards (The 3Com Airconnect and their
   ilk) and only reset them *ONCE* ever.  This appears to make them work,
   but more testing is needed.  The tests that would wedge up my machine
   completely now appear to work, but I have not real access points
   handy.
2) Report both the Station firmware and the Primary firmware on Prism
   based cards.  On Lucent based cards, only report the station firmware
   since that's all it supports.  On symbol cards, report the symbol
   specific firmware name as its station firmware.
3) Better Prism 2.5 and 3 family names.  We really need to go table
   driven for this.
4) Workaround for bugs in Intersil's firmware is only needed for at most
   0.8.2 and earlier, since 0.8.3 and later appear to work.

Obtained from: NetBSD
2002-04-03 19:44:17 +00:00
imp
6503ac6382 First cut at breaking out the bus attachment from the bus independent
part of the driver.  Also, move the softc and some other stuff to
if_wivar.h from if_wireg.h to make future merging activities easier.
2002-04-02 02:38:35 +00:00
imp
97a1f83469 More diff reduction patches 2002-04-01 18:52:53 +00:00
imp
702c781e57 Merge a little from NetBSD. This changes reduces the diffs between the
two a little, but more commits like this will follow.
2002-04-01 18:28:20 +00:00
imp
fa6285a0b1 Add more ID's from the PRISM family. from wi.c 1.61 and wireg.h 1.26 by
ichiro@netbsd.org

Obtained from: NetBSD
2002-04-01 18:07:05 +00:00
imp
14370d6a93 Identify PRISM 2.5 with ISL37300P
Obtained from: OpenBSD
2002-03-29 00:32:32 +00:00
imp
da1bd534b2 Integrate the air-tools 0.2 from dachb0den labs.
o This moves the common.h file into if_wavelan_ieee.h

Submitted by: h1kari@dachb0den.com
2002-03-29 00:26:23 +00:00
imp
ca0f2a1b7a o Rework the identify routine a little, merging it with NetBSD's wi.
o Add exerpimental support for identifying lucent cards.  All of mine
  come back with ID of 1, but NetBSD committed code for 5.  So accept
  both.
o rename wi_prism2_ver to wi_firmware_ver so that we could, if necessary,
  do special things for lucent cards too.
o Bring in a small part of the changes from airtools: The wi_cmd function
  now takes two additional arguments.  I didn't bring in their ioctls yet.
o eliminate the use of LE16TOH, and remove its define.
o Print the firmware as if there were 100 versions instead of 10.  This means
  that 6.1 and 6.10 aren't confusing to people.  We now print 6.01 in the
  former case.

# A good junior hacker project would be to merge the NetBSD, FreeBSD, and
# OpenBSD drivers into one source base.
2002-03-16 22:59:15 +00:00
imp
838cc06843 Merge a little from NetBSD. 2002-03-05 16:06:54 +00:00
brooks
6cc0b98fd5 Add support for the Linksys WMP-11, Prism 2.5, PCI adaptor.
Submitted by:	Thomas Skibo <skibo@pacbell.net>
MFC after:	2 weeks
2002-02-12 17:52:11 +00:00
imp
245b70f5f2 Implement prism2 detection from NetBSD. This mostly obsoletes the
prism2 flag in pccard.conf, but I'm leaving it place for the moment in
case the small sample of PrismII cards that I've tried is not
representative.

MFC After: 30 days
Obtained from: NetBSD
2001-12-05 08:57:36 +00:00
nsayer
ff3f45d379 In order for the MA301 to pass interrupts from the PCCard, you must
go into the PLX 9052's interrupt control register and turn on the magic
interrupt enable bit.

Partial thanks are due to OpenBSD for pointing out that the chip is a
PLX 9052 and pointing me to the datasheet PDF.
2001-08-24 02:14:26 +00:00
nsayer
2c80ec8e4a Add support for the Netgear MA301 PCI adapter for the MA401.
It appears that a number of PrismII card vendors seem to be doing the
same thing (that is, using the same PCI bridge chip) to support PCI,
but each with their own vendor/product ID. So rather than cut-n-paste
another if statement into the probe routine, it's probably better to
provide support for a table. Adding new devices will be a lot easier
that way.
2001-08-23 00:57:40 +00:00
jhb
fbaf605e32 Disable the wi driver locking for now. The driver tries to tsleep with the
driver lock held on detach which can lead to annoying and useless panics.
2001-05-17 22:20:54 +00:00
wpaul
2363147019 Fix a couple style nits, no code changes. Turn one magic number into
a #defined constant, wrap a few long lines, etc... Also remove stupid
'all your base are belong to us' joke from comment that I don't really
care to see immortalized in the source tree.
2001-03-29 19:11:45 +00:00
alfred
0d2956305c Add support for the Addtron AWA100 PCI wireless card.
The AWA100 is a PCI board with a PLX 9052 chip that's used to talk to
the pccard inserted into the board.

Remove a redundant $FreeBSD while I'm here.
2001-03-28 05:05:05 +00:00
bmilekic
f364d4ac36 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
wpaul
82aa2600cc Apply some contributed patches to reduce number of tx buffer allocation
failures and add some support for WEP on Prism II chip.

Submitted by: YAMAMOTO Shigeru <shigeru@iij.ad.jp>
2000-12-15 23:34:13 +00:00
wpaul
b9beb40017 Update the wi driver to use mutexes instead of spls. 2000-10-13 20:33:24 +00:00
wpaul
648f1c0043 Add support for WEP (encryption) for silver and gold WaveLAN/IEEE turbo cards.
Also update wicontrol to enable/disable encryption, set WEP keys and set the
TX key index. Silver cards only have 40-bit keys. This is something of a quick
hack, but it works well enough for me to commit this from the LinuxWorld
exhibit floor.

The WEP support only shows up if you have a card that supports it.

Would have been approved by: jkh, if he hadn't wandered off somewhere
Approved in his place by: msmith, who's standing right here
2000-02-02 17:59:13 +00:00
wpaul
d0da4e010d Update the WaveLAN/IEEE driver:
- Convert to new bus attachment scheme. Thanks to Blaz Zupan for doing
  the initial work here. One thing I changed was to have the attach
  and detach routines work like the PCI drivers, which means that in
  theory you should be able to load and unload the driver like the PCI
  NIC drivers, however the pccard support for this hasn't settled down
  yet so it doesn't quite work. Once the pccard work is done, I'll have
  to revisit this.

- Add device wi0 to PCCARD. If we're lucky, people should be able to
  install via their WaveLAN cards now.

- Add support for signal strength caching. The wicontrol utility has
  also been updated to allow zeroing and displaying the signal strength
  cache.

- Add a /sys/modules/wi directory and fix a Makefile to builf if_wi.ko.
  Currently this module is only built for the i386 platform, though once
  the pccard stuff is done it should be able to work on the alpha too.
  (Theoretically you should be able to plug one of the WaveLAN/IEEE ISA
  cards into an alpha with an ISA slot, but we'll see how that turns out.

- Update LINT to use only device wi0. There is no true ISA version of
  the WaveLAN/IEEE so we'll never use an ISA attachment.

- Update files.i386 so that if_wi is dependent on card.
1999-11-25 20:45:49 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
wpaul
041c449ca2 Correct the alignment of some of the members in the wi_frame structure.
The structure is the right length, but some of the members (notably
wi_q_info) were off a bit. This causes the received signal strength
values to appear bogus.
1999-07-20 20:03:42 +00:00
wpaul
7a9444f4de Add support to wicontrol(8) and wi(4) for enabling and configuring
power management. This will only work on newer firmware revisions; older
firmware will silently ignore the attempts to turn power management on.

Patches supplied by: Brad Karp <karp@eecs.harvard.edu>
1999-05-07 03:28:54 +00:00
wpaul
07346f9ac9 Modify wicontrol(8) and wi(4) to allow setting the frequency of the
WaveLAN's radio modem. The default is whatever the NIC uses since NICs
sold in different countries may default to different frequencies. (The
Lose95/LoseNT software doesn't let you select the channel so it's probably
not really meant to be changed.)
1999-05-06 16:32:45 +00:00
wpaul
7d2d27f237 Fix some byte ordering problems; I was storing string lengths wrong,
which was causing wicontrol to crash when reading string parameters
from the WaveLAN.

Patches submitted by: Brad Karp <karp@eecs.harvard.edu>
1999-05-06 03:34:02 +00:00
wpaul
fd47563fe4 Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00