of harcoded pr_osrelease, pr_osrel values. This will be used later in
the VDSO.
Differential Revision: https://reviews.freebsd.org/D1042
Reviewed by: trasz
of multiple simultaneous calls to pthread_join() specifying the same
target thread are undefined wake up the one thread.
Differential Revision: https://reviews.freebsd.org/D1040
The reasons:
1. Get rid of the stubs/quirks with process dethreading,
process reparent when the process group leader exits and close
to this problems on wait(), waitpid(), etc.
2. Reuse our kernel code instead of writing excessive thread
managment routines in Linuxulator.
Implementation details:
1. The thread is created via kern_thr_new() in the clone() call with
the CLONE_THREAD parameter. Thus, everything else is a process.
2. The test that the process has a threads is done via P_HADTHREADS
bit p_flag of struct proc.
3. Per thread emulator state data structure is now located in the
struct thread and freed in the thread_dtor() hook.
Mandatory holdig of the p_mtx required when referencing emuldata
from the other threads.
4. PID mangling has changed. Now Linux pid is the native tid
and Linux tgid is the native pid, with the exception of the first
thread in the process where tid and pid are one and the same.
Ugliness:
In case when the Linux thread is the initial thread in the thread
group thread id is equal to the process id. Glibc depends on this
magic (assert in pthread_getattr_np.c). So for system calls that
take thread id as a parameter we should use the special method
to reference struct thread.
Differential Revision: https://reviews.freebsd.org/D1039
threads split sys_sched_getparam(), sys_sched_setparam(),
sys_sched_getscheduler(), sys_sched_setscheduler() to their kern_*
counterparts and add targettd parameter to allow specify the target
thread directly by callee.
Differential Revision: https://reviews.freebsd.org/D1034
Reviewed by: trasz
threads refactor kern_sched_rr_get_interval() and sys_sched_rr_get_interval().
Add a kern_sched_rr_get_interval() counterpart which takes a targettd
parameter to allow specify target thread directly by callee (new Linuxulator).
Linuxulator temporarily uses first thread in proc.
Move linux_sched_rr_get_interval() to the MI part.
Differential Revision: https://reviews.freebsd.org/D1032
Reviewed by: trasz
threads introduce kern_thr_alloc() which will be used later in the
linux_clone().
Differential Revision: https://reviews.freebsd.org/D1029
Reviewed by: trasz
threads split sys_thr_exit() up into sys_thr_exit() and kern_thr_exit().
Move
Where the second will be used in linux_exit() system call later.
Differential Revision: https://reviews.freebsd.org/D1028
Reviewed by: trasz
threads introduce linux_exit() stub instead of sys_exit() call
(which terminates process).
In the new linuxulator exit() system call terminates the calling
thread (not a whole process).
Differential Revision: https://reviews.freebsd.org/D1027
Reviewed by: trasz
In reality, SIOCGI2C ioctl requires struct ifreq as many other
ioctls. Doing copyin() on (significantly) larger struct ifstat sometimes
triggered EFAULT.
Reported by: Olivier Cochard-Labbé <olivier at cochard.me>
MFC after: 1 week
based device.
Following u-boot commands allow FreeBSD boot on
Yiyate Android TV Box (aml8726-m3):
tv open 480p
mmc rescan 0
fatload mmc 0 0x80100000 kernel.bin
go 0x80100000
The current FreeBSD driver doesn't program the video
clocks so the u-boot tv command is necessary in order
for the frame buffer to be useful (otherwise it can
be skipped).
The SD card for the Yiyate Android TV Box doesn't need
anything special beyond creating a FAT16 and a UFS
filesystem.
Differential Revision: https://reviews.freebsd.org/D2636
Submitted by: John Wehle
https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.txt
Without this booting the VSATV102 causes the blue "working" led to turn
off when the kernel starts up. With this the led (which is turned on by
the firmware) stays on since that's the default state specified in the FDT.
Expanded the meaning of the led_create_state state parameter in order
to implement support for "keep". The original values were:
== 0 Off
!= 0 On
The new values are:
== -1 don't change / keep current setting
== 0 Off
!= -1 && != 0 On
This should have no effect on acpi_asus_attach which only calls
led_create_state with state set to 1. Updated acpi_ibm_attach
in order to avoid surprises.
Differential Revision: https://reviews.freebsd.org/D2615
Submitted by: John Wehle
Reviewed by: gonzo, loos
In smp_rendezvous_cpus we expect to wait for all cpus to enter
smp_rendezvous_action. If we call this holding a proc lock swapper may
attempt to also lock it, however as interrupts are disabled the cpu never
handles the ipi. Because smp_rendezvous_action waits for all signaled
cpus before contining it may get caught waiting for the cpu running swapper
as the proc mutex will be unlocked after smp_rendezvous_cpus finishes.
The fix is to enable interrupts in the configure stage as we should be
doing.
MFC after: 1 week
to sleep while it waits to start scheduling. The boot core can then use
the send-event instruction to wake the cores when they should enter the
scheduler.
MFC after: 1 week
so that it would not return less data than requested.
Since returning less directory data than requested is not a problem
for FreeBSD and even UFS no longer returns directory structures
with d_fileno == 0, this patch stops the client from doing this.
Although entries with d_fileno == 0 should not be a problem,
the man pages no longer document that these entries should be
ignored, so there was a concern that these entries might be an
issue in the future.
Suggested by: trasz
Tested by: trasz
MFC after: 2 weeks
stopping signals should obey, but also all forms of single-threading.
Otherwise, thread might sleep interruptible while owning some
resources, and single-threading thread could try to access them.
An example is owning vnode lock while dumping core.
Submitted by: Conrad Meyer
Review: https://reviews.freebsd.org/D2612
Tested by: pho
MFC after: 1 week
when allocation fails, it suffices to perform VM_WAIT. The direct map
covers the entirely of physical memory, so unlike 32-bit mips any
physical page can be used as a page table page.
ieee80211_pwrsave() can fail due to queue overflow, check its return code
and increment oerrors counter when it fails. Also handle more error cases
and update oerrors counter when we don't send mbuf due to some errors.
Return ENETDOWN when parent interface isn't ready. Update obytes and omcasts
counters in corresponding places.
PR: 184626
Differential Revision: https://reviews.freebsd.org/D2621
Reviewed by: adrian
MFC after: 1 week
This dramatically improves RX sensitivity and behaviour on the
AR9331 hardware I have, including the Carambola 2.
Tested:
* AR9331, Carambola 2 board
Submitted by: Zilvinas Valinskas <zilvinas.valinskas@gmail.com>
Reduce a number of duplicated logic.
As of this commit, this file does exactly what it is needed to do.
MFC after: 3 days
X-MFC-Note: needs all previous changes
Sponsored by: The FreeBSD Foundation
discrimination between different subarch binaries, at least for mips
and arm. Arm is implemented, mips is still tbd, so not currently
exported. aarch64 does not export this because aarch64 binaries use
different tags and flags than arm.
Differential Revision: https://reviews.freebsd.org/D2611
have an accurate length on an EPT violation. This is not needed by the
instruction decoding code because it also has to work with AMD/SVM that
does not provide a valid instruction length on a Nested Page Fault.
In collaboration with: Leon Dang (ldang@nahannisys.com)
Discussed with: grehan
MFC after: 1 week
