After e7a5b3bd05, the la->delay value was adjusted after
being set by the starvation_limit code block, which is wrong.
Reported By: avg
Reviewed By: avg
Fixes: e7a5b3bd05
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29513
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
This allows the xhci tablet device to be recognized and a PCI device
instantiated.
Reviewed by: jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 3 months.
This was ported from illumos but not completely done. Currently we do
not perform type deduplication between KLDs and the kernel, i.e., kernel
modules have a complete type graph. So, remove it for now since it's
not functional and complicates the task of modifying various CTF type
definitions, and we are hitting some limits in the current format which
necessitate an update.
No functional change intended.
MFC after: 2 weeks
Several large data structures are allocated by fsck_ffs to track
resource usage. Most but not all were deallocated at the end of
checking each filesystem. This commit consolidates the freeing
of all data structures in one place and adds one that had previously
been missing.
It is important to clean up these data structures as they can be
large. If the previous allocations have not been freed, fsck_ffs
can run out of address space when many large filesystems are being
checked. An alternative would be to fork a new instance of fsck_ffs
for each filesystem to be checked, but we choose to free the small
set of large structures to save the fork overhead.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 7 days
Sponsored by: Netflix
After making sbuf_drain safe for external use,
there is no need to protect the call.
MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29545
While sbuf_drain was an internal function, two
KASSERTS checked the sanity of it being called.
However, an external caller may be ignorant if
there is any data to drain, or if an error has
already accumulated. Be nice and return immediately
with the accumulated error.
MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29544
The reset is necessary at the beginning of the function, because of
the errno logic in the error path (set errno to EINVAL if not set).
If errno is already set when calling the function, and the function
fails, the previous errno value will be inherited.
and other equivalent ways to request mcount-based profiling, like
'profile N' in kernel config.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29529
The VFS conventions is that VOP_LOOKUP() methods do not need to handle
ISDOTDOT lookups for VV_ROOT vnodes (since they cannot, after all). Nullfs
bypasses VOP_LOOKUP() to lower filesystem, and there, due to user actions,
it is possible to get into situation where
- upper vnode does not have VV_ROOT set
- lower vnode is root
- ISDOTDOT is requested
User just needs to nullfs-mount non-root of some filesystem, and then move
some directory under mount, out of mount, using lower filesystem.
In this case, nullfs cannot do much, but we still should and can ensure
internal kernel structures are consistent. Avoid ISDOTDOT lookup forwarding
when VV_ROOT is set on lower dvp, return somewhat arbitrary ENOENT.
PR: 253593
Reported by: Gregor Koscak <elogin41@gmail.com>
Test by: Patrick Sullivan <sulli00777@gmail.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A lot of firmware files have a "-" in the name. That "-" is a problem
when dealing with shell variables or loader (e.g., auto-loading .ko).
It may thus often be convenient to generate firmware kernel object files
with s/-/_/g in the name. In order to automatically find them from
drivers using LinuxKPI also substitue the '-' for a '_' like we do
for '/' and '.' already.
Reviewed-by: hselasky, manu (ok)
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29514
Rename the last remaining bits depending on ifnet from linux/netdevice.h
instead of using the compat macros. This helps clearing up
struct netdevice being struct ifnet from linux/netdevice.h.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, kib
X-D-R: D29366
Differential Revision: https://reviews.freebsd.org/D29497
Under geom(4) nvme_ns_bio_process() is on the path where sleep
is prohibited as g_io_shedule_down() calls THREAD_NO_SLEEPNG()
before geom->start().
Reviewed By: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29539
Allow the calculation of the mu adjustment factor to underflow instead of
rejecting the VOI sample from the digest and logging an error. This trades off
some (currently unquantified) additional centroid error in exchange for better
fidelity of the distribution's density, which is the right trade off at the
moment until follow up work to better handle and track accumulated error can be
undertaken.
Obtained from: Netflix
MFC after: immediately
Test individual sizes up to the max encryption block length as well as
a few sizes that include 1 full block and a partial block before
doubling the size.
Reviewed by: cem, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29518
The loops for Chacha20 and Chacha20+Poly1305 which encrypted/decrypted
full blocks of data used the minimum of the input and output segment
lengths to determine the size of the next chunk ('todo') to pass to
Chacha20_ctr32(). However, the input and output segments could extend
past the end of the ciphertext region into the tag (e.g. if a "plain"
single mbuf contained an entire TLS record). If the length of the tag
plus the length of the last partial block together were at least as
large as a full Chacha20 block (64 bytes), then an extra block was
encrypted/decrypted overlapping with the tag. Fix this by also
capping the amount of data to encrypt/decrypt by the amount of
remaining data in the ciphertext region ('resid').
Reported by: gallatin
Reviewed by: cem, gallatin, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29517
Commit fdc9b2d50f replaced a couple of while loops with LIST_FOREACH()
loops. This patch factors the body of that loop out into a separate
function called nfscl_checkown().
This prepares the code for future changes to use a hash table of
lists for open searches via file handle.
This patch should not result in a semantics change.
MFC after: 2 weeks
An NFSv4 only configuration does not register with
rpcbind(). Without this patch a failure to rpcb_unset()
is reported when the daemon is terminated for this case.
This is harmless noise, but this patch avoids calling
rpcb_unset() for the NFSv4 only case, avoiding the noise.
When called with "-d", it still does the rpcb_unset(),
assuming that the configuration might have been
changed to NFSv4 only and unregistering with
rpcbind() might still be needed.
Reviewed by: freqlabs
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29449
There is no change in the source of the stats (t4_get_port_stats or
t4_get_vi_stats) but the per-port callout is gone.
Sponsored by: Chelsio Communications
Reviewed by: jhb@
Differential Revision: https://reviews.freebsd.org/D29527
ULE uses this topology to try and preserve locality when migrating
threads between CPUs and when performing work stealing. Ensure that on
NUMA systems it will at least take the NUMA topology into account.
Reviewed by: bdragon, jhibbits (previous version)
Tested by: bdragon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28580
- Always use distinct sockets for send and recv
- Limit rights on the recv socket
For ICMP6 we were using the same socket for both send and receive, and
we limited rights on the socket such that it's impossible to receive
anything.
PR: 254623
Diagnosed by: Zhenlei Huang <zlei.huang@gmail.com>
Reviewed by: oshogbo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29523
Provide a histogram output to check, if the hashsize or
bucketlimit could be optimized. Also add some basic sanity
checks around the accounting of the hash utilization.
MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29506
As accessing the tcp hostcache happens frequently on some
classes of servers, it was recommended to use atomic_add/subtract
rather than (per-CPU distributed) counters, which have to be
summed up at high cost to cache efficiency.
PR: 254333
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Reviewed By: #transport, tuexen, jtl
Differential Revision: https://reviews.freebsd.org/D29522
This fixes double IVHD_SETUP_INTR calls on the same IOMMU device.
Sponsored by: The FreeBSD Foundation
MFC with: 74ada297e8
Reported by: Oleg Ginzburg <olevole@olevole.ru>
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29521
Add a dummy vendor menu entry on the main welcome menu. Vendors can override
this in their local.lua file to create whatever sub-menu they need for their
products.
Also fix the adding a 'welcome' entry as well based on a suggestion from Kyle.
Silly option menu code also from Kyle. They seem to work for me, but any
transcription error is likely mine.
Reviewed by: kevans@ (the vendor stuff)
rttrash (unused but not yet delete entries) were eliminated
during routing rework. Remove reading these symbols from the kernel.
PR: 254681
Reported by: rashey@superbox.pl
MFC after: immediately
This only works on single-CPU G4 systems, and more work is needed for
dual-CPU systems. That said, platform sleep does not work, and this is
currently only used for PMU-based CPU speed change.
The elimination of the platform_smp_timebase_sync() call is so that the
timebase sync rendezvous can be enhanced to perform better
synchronization, which requires a full rendezvous. This would be
impossible to do on this single-threaded run.
Rename cpu_sleep() to mpc745x_sleep() to denote what it's actually
intended for. This function is very G4-specific, and will not work on
any other CPU. This will afterward eliminate a
platform_smp_timebase_sync() call by directly updating the timebase
instead.
Addressing the underlying root cause for cache_count to
show unexpectedly high values, by protecting all arithmetic on
that global variable by using counter(9).
PR: 254333
Reviewed By: tuexen, #transport
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29510
