pmap_invalidate_cache_range() when self-snoop is apparently not reported
in cpu features. We get a reserved trap when clflushing APIC registers
window.
XEN in full system virtualization mode removes self-snoop from CPU
features, making this a problem.
Tested by: csjp
Reviewed by: alc
MFC after: 3 days
Also, the previous commit to sys/dev/if_ndis/if_ndis.c also included the
removal of a call to ndis_setstate_80211 that is no longer needed.
Submitted by: sam
MFC after: 3 days
sysctl lock. The 'video' lock now protects the 'bus' of video output
devices attached to a graphics adapter. It is used when iterating over
the list of outputs, etc. The 'video_output' lock is used to lock the
output-specific data similar to a driver lock for the individual video
outputs.
MFC after: 2 weeks
an IPv6 support.
Reported by: Alexander Best <alexbestms__at__math.uni-muenster.de>
Confirmed by: Paul B. Mahol <onemda__at__gmail.com>,
Alexander Best <alexbestms__at__math.uni-muenster.de>
1) Restore the PCI Express control register after a watchdog
reset. This is required because the device will come out
of watchdog reset with the pectl reg at its default state,
and important BIOS configuration (like max payload size)
could be lost.
2) Call mxge_start_locked() for every tx queue before dropping
the lock in the watchdog handler. This is required, as
the queue's buf ring may have filled during the reset.
perform 802.11 operations directly on the ndis0 interface before the
first VAP (wlan0) had been created. This would lead to a NULL-pointer
dereference in the kernel.
Submitted by: Paul B. Mahol <onemda@gmail.com>
MFC after: 3 days
in order to avoid, on architectures which doesn't have strong ordered
writes, CPU instructions reordering.
Diagnosed by: fabio
Reviewed by: jhb
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
code that merely emits an error and waits for a key press before
rebooting. The error being that extended partitions are not
bootable. The origin is presumed to be Windows 2000; Windows XP
does not do this...
For now, ignore the first 96 bytes when checking that the EBR is
(for the most part) all zeroes.
Tested by: Mario Lobo <mlobo@digiart.art.br>
MFC after: 1 week
capability to mii(4). Even though AR8132 uses the same model/
revision number of F1 gigabit PHY, the PHY has no ability to
establish 1000baseT link. I have no idea why Atheros use the same
device/model id for this PHY.
With this change atphy(4) does not report 1000baseT media
capability and manual 1000baseT configuration is also disabled
which is more desirable behavior for 10/100Mbps PHY.
Unlike most other PHYs there is no easy way to know which media
type the PHY supports on Marvell PHYs. MIIF_HAVEFIBER flags is now
passed via bus-specific instance variable of a device. While I'm
here add 88E1112 specific work around to set SIGDET polarity low.
Many thanks "Eugene Perevyazko <john <> dnepro dot net>" who kindly
gave remote access to system with DGE-560SX.
offloading. Datasheet said nothing about the limitation of 82559ER
except WOL. Explicitly disable Rx checksum offloading for
controllers that is known to lack the capability.
PR: kern/138135
Tested by: Gooderum, Mark < mgooderum <> websense dot com >
Who knew that "svn export" was an actual command, or that I would have
vfs_export.c stuck in my mind deep enough to type "export" instead of
"commit"?
Pointy Hat to: jamie
are currently two problems with the use of 1GB page mappings by the direct
map. First, at least one device driver uses pmap_extract() rather than
DMAP_TO_PHYS() to translate a direct map address to a physical address.
Unfortunately, neither pmap_extract() nor pmap_kextract() yet support 1GB
page mappings. Second, pmap_bootstrap() needs to interrogate the MTRRs to
ensure that a 1GB page mapping doesn't span two MTRRs of different types.
Reported and tested by: Daniel O'Connor
MFC after: 3 days
- F_READAHEAD: specify the amount for sequential access. The amount is
specified in bytes and is rounded up to nearest block size.
- F_RDAHEAD: Darwin compatible version that use 128KB as the sequential
access size.
A third argument of zero disables the read-ahead behavior.
Please note that the read-ahead amount is also constrainted by sysctl
variable, vfs.read_max, which may need to be raised in order to better
utilize this feature.
Thanks Igor Sysoev for proposing the feature and submitting the original
version, and kib@ for his valuable comments.
Submitted by: Igor Sysoev <is rambler-co ru>
Reviewed by: kib@
MFC after: 1 month
