This allows for rtld to not issue two sigprocmask(2) syscalls for each
symbol binding operation in single-threaded processes. Rtld needs to
block signals as part of locking to ensure signal safety of the bind
process, because signal handlers might need to lazily resolve symbol
references.
As result, number of syscalls issued on startup by simple programs not
using libthr, is typically reduced 2x. For instance, for hello world,
I see:
non-sigfastblock
# (truss ./hello > /dev/null) |& wc -l
63
sigfastblock
# (truss ./hello > /dev/null) |& wc -l
37
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
It's faster and more reliable to wait_for_pids than to sleep 1.
cem@ suggested just to remove auditd_stop() and use the rc.subr default
stop action (SIGTERM instead of audit -t), which has a built-in
wait_for_pids. That may be a better solution.
Discussed with: cem
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23223
They were introduced to take care of ifunc, but right now no architecture
provides ifunc'ed variants. Since rtld uses memset extensively this results in
a pessmization. Should someone want to use ifunc here they should provide a
mandatory symbol (e.g., rtld_memset).
See the review for profiling data.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23176
Move all MD statements into $MACHINE_ARCH/Makefile.inc.
Unconditionally apply version script to rtld, the interpreter is not
functional without it for long time.
Reviewed by: brooks, emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D23083
The path is already absolute.
Noted and reviewed by: rstone
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23121
instead of killing the process. The same behaviour of terminating
image activation if the $ORIGIN cannot be resolved for the main
object, is kept.
Reported by: Greg V <greg@unrelenting.technology>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23053
We know the binary relative name and can reliably calculate cwd path.
Because realpath(3) was already linked into ld-elf.so.1, reuse it
there to resolve dots and dotdots making the path more canonical.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23014
People use rc.conf inside vnet jails to configure networking setups.
Presumably because some sysctl were not virtualised up until r356527 the
script was not run for vnet jails leaving the rc.conf options without
effect for non-obvious reasons. Run the netoptions startup script also
for VNET jails now to make the rc.conf options work.
PR: 243193
MFC after: 2 weeks
binpath local was changed from char array to a char pointer, update
strlcpy/strlcat uses.
Reported by: Coverity through vangyzen
CID: 1412239 and 1412240
Reviewed by: emaste, imp, vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23090
When rtld is directly executed with arguments, it has to move the
program arguments, environment and elf aux data up a few slots to
remove its own arguments before the process being executed sees
them. When copying the environment, rtld was incorrectly testing
whether the location about to be written to currently contained
NULL, when was supposed to check whether it had just copied the
NULL terminator of the environment string. This had the result
that the ELF aux data was mostly treated as environment variables,
and rtld would quickly crash when it tried to access required
ELF aux data that it didn't think was present.
Differential Revision: https://reviews.freebsd.org/D23008
Reviewed by: kib
MFC after: 1 month
When activated in direct exec mode, kernel-provided AT_EXECPATH points
to the interpreter. We need to recalculate auxv to point to the
string with the path to the executable which is actually executed.
The somewhat problematic case is when the executable path is relative
and either $PATH use is not enabled or it contains '/' so $PATH search
is not performed. In this case resulting AT_EXECPATH is relative, I
might fix this later.
Reported and reviewed by: rstone
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22894
Summary:
As a transition aide, implement an alternative elfN_freebsd_fixup which
is called for old powerpc binaries. Similarly, add a translation to rtld to
convert old values to new ones (as expected by a new rtld).
Translation of old<->new values is incomplete, but sufficient to allow an
installworld of a new userspace from an old one when a new kernel is running.
Test Plan:
Someone needs to see how a new kernel/rtld/libc works with an old
binary. If if works we can probalby ship this. If not we probalby need
some more compat bits.
Submitted by: brooks
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20799
As PowerPC is moving to clang, we can finally start taking advantage of
IFUNC.
Implement the MD parts of IFUNC handling for rtld.
Currently, it is necessary to look for R_PPC_IRELATIVE in the PLT in
addition to RELA. This is an ABI violation, but LLD9 has some .iplt bugs
that require this as a workaround.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22855
As PowerPC is moving to clang, we can finally start taking advantage of
IFUNC.
Implement the MD parts of IFUNC handling for rtld.
Currently, it is necessary to look for R_PPC_IRELATIVE in the PLT in
addition to RELA. This is an ABI violation, but LLD9 has some .iplt bugs
that require this as a workaround.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22789
When a PT_LOAD segment has a zero p_filesz, skip the data mmap, as mmapping
zero bytes from a file is an error.
A PT_LOAD with zero p_filesz is legal (but somewhat uncommon due to segment
merging in modern linkers, as it is more efficient to merge .data and .bss
by just extending p_memsz in the previous segment, assuming compatible
page protection.)
This was seen on ports/graphics/glew on a powerpc64 ELFv2 experimental
build.
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22634
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
TP points to the start of the TLS block after the tcb, but
Obj_Entry.tlsoffset includes the tcb, so subtract the size of the tcb
to compute the offset relative to TP.
This is identical to the same fixes for powerpc in r339072 and r342671.
Reviewed by: James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22661
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Before this commit, the save-entropy script rotates entropy files
like logs. This involves creating a new file that holds the entropy
and renaming of all existing entropy files. However, the entropy
data do not really need to be kept in a particular order, and
replacing the oldest file is sufficient.
This commit replaces the rotation with a scan in the
[1..entropy_save_num] space that finds the first empty slot, or
the slot of the oldest file, and writes entropy into that slot.
This also fixes an issue that prevents save-entropy from saving
any entropy when there is one non-regular file in any slot as a
side effect.
Based on an earlier patch from peterj@.
PR: 134225
Reported by: peterj
Reviewed by: csprng (cem, markm)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22612
When a system has no internet connection, or when it is configured to obtain
ntpd leapfiles from some source other than the internet, or even when the
sysadmin has decided for some reason to customize ntp.conf to eliminate use
of the leapfile, the rc.d/ntpd script emits various error messages related
to the file.
This change allows setting the rc var ntp_db_leapfile to NONE to disable all
automatic processing related to that file in rc.d/ntpd.
Differential Revision: https://reviews.freebsd.org/D22461
Four bytes of padding are needed in the regular powerpc case to bring the
stack frame size up to a multiple of 16 bytes to meet ABI requirements.
Fixes odd hangs I was encountering during testing.
Summary:
We need to save off the full 64-bit register, not just the low 32 bits,
of all registers getting saved off in _rtld_bind_start. Additionally,
we need to save off the other SPE registers (SPEFSCR and accumulator),
so that their program state is not affected by the PLT resolver.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D22520
Each boot, regenerate /var/run/os-release based on the currently running
system. Create a /etc/os-release symlink pointing to this file (so that this
doesn't create a new reason /etc can not be mounted read-only).
This is compatible with what other systems do and is what the sysutil/os-release
port attempted to do, but in an incomplete way. Linux, Solaris and DragonFly all
implement this natively as well. The complete standard can be found at
https://www.freedesktop.org/software/systemd/man/os-release.html
Moving this to the base solves both the non-standard location problem with the
port, as well as the lack of update of this file on system update.
Bump __FreeBSD_version to 1300060
PR: 238953
Differential Revision: https://reviews.freebsd.org/D22271
FreeBSDlua ("flua") is a FreeBSD-private lua, flavored with whatever
extensions we need for base system operations. We currently support a subset
of lfs and lposix that are used in the rewrite of makesyscall.sh into lua,
added in r354786.
flua is intentionally written such that one can install standard lua and
some set of lua modules from ports and achieve the same effect.
linit_flua is a copy of linit.c from contrib/lua with lfs and lposix added
in. This is similar to what we do in stand/. linit.c has been renamed to
make it clear that this has flua-specific bits.
luaconf has been slightly obfuscated to make extensions more difficult. Part
of the problem is that flua is already hard enough to use as a bootstrap
tool because it's not in PATH- attempting to do extension loading would
require a special bootstrap version of flua with paths changed to protect
the innocent.
src.lua.mk has been added to make it easy for in-tree stuff to find flua,
whether it's bootstrap-flua or relying on PATH frobbing by Makefile.inc1.
Reviewed by: brooks, emaste (both earlier version), imp
Differential Revision: https://reviews.freebsd.org/D21893
to disable mounting Linux-specific filesystems under /compat/linux
when 'linux_enable' is set to YES.
Reviewed by: netchild, ian (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22320
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Reviewed by: imp, kib
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Previously the watchdog timeout message was appended to the last entry
in the "Waiting for PIDS" list, resulting in a message like
Waiting for PIDS: 31299 31296 90201 9020090 second watchdog timeout
expired. Shutdown terminated.
Print a newline to separate the watchdog timeout message. Also perform
the kill before logging or echoing the message.
PR: 241072
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
'sysvipc' - it has nothing to do with ABIs, and I'd like to later
rename 'abi' to 'linux', which better describes its purpose and also
matches the rcvar name.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21615
has become very trigger-happy with libc++ 9.0.0.
It does not help that gcc's implementation of this warning is even more
trigger-happy, in the sense that it already warns on the declaration
itself, not when you are using it. This is very annoying with our use
of -Wsystem-headers. That should really be disabled for gcc.
