The hard work of parsing fields per-CPU, handling heterogeneous
features, and excluding features from userspace is already done by
update_special_regs. We can build our set of HWCAPs from the result.
This exposed a small bug in update_special_regs, in which the
generated bitmask was not wide enough, and as a result some bits
weren't being exposed in user_cpu_desc. Fix this.
While here, adjust some formatting.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26069
This adds definitions for the latest additions to the AA64ISAR[01] ID
registers. This brings these registers in sync with ARMv8.6 initial spec
release.
An future change will parse many of these fields for HWCAP features.
Reviewed by: andrew, manu, markj (all previous versions)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26029
This adds support for the Cortex-A76 and Neoverse-N1 PMU counters to pmc.
While here add more PMCR_IDCODE values and check the implementers code is
correct before setting the PMU type.
Reviewed by: bz, emaste (looks reasonable to me)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25959
- Do not rely on U-Boot for clocks configuration, enable and set frequencies
in the driver's attach method.
- Adjust MAC settings according to detected linespeed on RK3399 and RK3328.
- Add support for RMII PHY mode on RK3328.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26006
Ethernet clocks on RK3328 are controlled by SYSCON registers, so add
RK_CLK_COMPOSITE_GRF flag to indicate that clock node should access grf
registers instead of CRU's
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25918
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Being able to use tmpfs without kernel modules is very useful when building
small MFS_ROOT kernels without a real file system.
Including TMPFS also matches arm/GENERIC and the MIPS std.MALTA configs.
Compiling TMPFS only adds 4 .c files so this should not make much of a
difference to NO_MODULES build times (as we do for our minimal RISC-V
images).
Reviewed By: br (earlier version for riscv), brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25317
This new function allows us to find the SMMU instance assigned
for a particular PCI RID.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D25687
This removes SCTP from in-tree kernel configuration files. Now, SCTP
can be enabled by simply loading the module, as discussed on
freebsd-net@.
Reviewed by: tuexen
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25611
It can be useful to get a dump of all registers when investigating why we
received an exception that we are unable to handle. In these cases we
already call panic, however we don't always print the registers.
Add calls to print_registers and print esr and far when applicable.
Sponsored by: Innovate UK
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
On architectures that use RELA relocations it is safe to rerun the ifunc
resolvers on after all CPUs have started, but while they are sill parked.
On arm64 with big.LITTLE this is needed as some SoCs have shipped with
different ID register values the big and little clusters meaning we were
unable to rely on the register values from the boot CPU.
Add support for rerunning the resolvers on arm64 and amd64 as these are
both RELA using architectures.
Reviewed by: kib
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25455
The functions to read the common user and kernel ID registers should be
in cpu.h rather than undefined.h as they are related to CPU details and
used by undefined instruction handlers.
Sponsored by: Innovate UK
Also move parsing the registers to just after the secondary CPUs have
started. This means the kernel register view from all CPUs is available
after the CPU SYSINITs have finished, e.g. for use by ifunc resolvers.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25505
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
In preparation for using ifuncs in the kernel is is useful to have a common
view of the arm64 ID registers across all CPUs. Add this and extract the
logic for finding the lower value of two fields to a new helper function.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25463
This effectively mirrors our libc implementation, but with minor fudging --
name needs to be copied in from userspace, so we just copy it straight into
stack-allocated memfd_name into the correct position rather than allocating
memory that needs to be cleaned up.
The sealing-related fcntl(2) commands, F_GET_SEALS and F_ADD_SEALS, have
also been implemented now that we support them.
Note that this implementation is still not quite at feature parity w.r.t.
the actual Linux version; some caveats, from my foggy memory:
- Need to implement SHM_GROW_ON_WRITE, default for memfd (in progress)
- LTP wants the memfd name exposed to fdescfs
- Linux allows open() of an fdescfs fd with O_TRUNC to truncate after dup.
(?)
Interested parties can install and run LTP from ports (devel/linux-ltp) to
confirm any fixes.
PR: 240874
Reviewed by: kib, trasz
Differential Revision: https://reviews.freebsd.org/D21845
For 1000Mb mode to work reliably TX/RX delays need to be configured
between the TX/RX clock and the respective signals on the PHY
to compensate for differing trace lengths on the PCB.
Reviewed by: manu
MFC after: 1 week
AcpiOsMapMemory is used for device memory when e.g. an _INI method wants
to access physical memory, however, aarch64 pmap_mapbios is hardcoded to
writeback. Search for the correct memory type to use in pmap_mapbios.
Submitted by: Greg V <greg_unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D25201
in vanilla Linux git tree.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25385
It turns out relocating the symbol table itself can cause issues, like fbt
crashing because it applies the offsets to the kernel twice.
This had been previously brought up in rS333447 when the stoffs hack was
added, but I had been unaware of this and reimplemented symtab relocation.
Instead of relocating the symbol table, keep track of the relocation base
in ddb, so the ddb symbols behave like the kernel linker-provided symbols.
This is intended to be NFC on platforms other than PowerPC, which do not
use fully relocatable kernels. (The relbase will always be 0)
* Remove the rest of the stoffs hack.
* Remove my half-baked displace_symbol_table() function.
* Extend ddb initialization to cope with having a relocation offset on the
kernel symbol table.
* Fix my kernel-as-initrd hack to work with booke64 by using a temporary
mapping to access the data.
* Fix another instance of __powerpc__ that is actually RELOCATABLE_KERNEL.
* Change the behavior or X_db_symbol_values to apply the relocation base
when updating valp, to match link_elf_symbol_values() behavior.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25223
FreeBSD madvise(2) directly. While some of the flag values match,
most don't.
PR: kern/230160
Reported by: markj
Reviewed by: markj
Discussed with: brooks, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25272
By using DWC TRM terminology, normal descriptor format should be named
extended and alternate descriptor format should be named normal.
Should not been functional change.
MFC after: 4 weeks
This chip is used in the Rasperry Pi 4, and is supported by the if_genet
driver. Currently we use the ukphy mii driver, this patch switches over
to the brgphy mii driver instead. To support the rgmii-rxid phy mode,
which is now the default in the Linux dtb, we add support for clock
skewing.
These changes are taken from OpenBSD and NetBSD, except for the bailout
in brgphy_bcm54xx_clock_delay() in rgmii mode, which was found necessary
after testing.
Submitted by: Robert Crowston, crowston at protomail.com
Differential Revision: https://reviews.freebsd.org/D25251
o Parse the ACPI DSD (Device Specific Data) graph property and record
device connections.
o Split-out FDT support to a separate file.
o Get the corresponding (FDT/ACPI) Coresight platform data in
the device drivers.
Sponsored by: DARPA, AFRL
