130485 Commits

Author SHA1 Message Date
sam
a95c51b9e7 don't call ath_reset when processing sysctl's before the device
is marked running; we don't have all the needed state in place

Noticed by:	Hugo Silva <hugo@barafranca.com>
MFC after:	1 week
2007-02-24 23:23:29 +00:00
sam
faef66011a set the antenna switch when fixing the tx antenna using the
dev.ath.X.txantenna sysctl; this is typically what folks
want but beware this has the side effect of disabling rx
diversity

MFC after:	2 weeks
2007-02-24 23:12:58 +00:00
simon
7706232aaa - Use a permanent URL to reference piso's mail.
- Put URL on seperate line to not get very long lines.
2007-02-24 21:59:18 +00:00
bms
79da54db62 Use sysctl(2), not kvm(3), to read IPv6 multicast information from
the running system.
Use the name 'IPv6 Forwarding Table', not 'IPv6 Routing Table', to be
consistent with what the code actually does and is.
2007-02-24 21:58:30 +00:00
bms
03b57a9ea6 Use the names 'IPv4' and 'Forwarding Table' in program output, not
'Routing Table', to be consistent with what the code actually does and is.
2007-02-24 21:56:52 +00:00
bms
e7c3371071 Add comments about where netstat is using KVM to read things which
should really be available via sysctl for a running system.
2007-02-24 21:42:21 +00:00
bms
7466d6dfe5 Reword addition about MROUTING.
Submitted by:	ru
2007-02-24 21:21:53 +00:00
bms
fcd6a02a5d Fix tinderbox. ip6_mrouter should be defined in raw_ip6.c as it is
tested to determine if the userland socket is open; this, in turn, is
used to determine if the module has been loaded.

Tested with:	LINT
2007-02-24 21:09:35 +00:00
piso
cb538c93c9 Update my previous note about newbus API breakage mentioning the
__FreeBSD_version bump.
2007-02-24 20:15:04 +00:00
piso
aac40ad798 Note newbus API & ABI breakage. 2007-02-24 19:45:09 +00:00
piso
b44ce1c4db Updated ia64 isa support with the new bus_setup_intr() syntax.
Approved by: re (implicit?)
2007-02-24 16:56:22 +00:00
netchild
888f5e57b2 Partial MFp4 of 114977:
Whitespace commit: Fix grammar, spelling and punctuation.

Submitted by:	"Scot Hetzel" <swhetzel@gmail.com>
2007-02-24 16:49:25 +00:00
imp
d9c67547e5 exca->pccarddev should always be non-null now. Only call it when the
device is actually attached.
2007-02-24 15:56:06 +00:00
delphij
e911872985 Convert sis(4) to use its own watchdog procedure.
Submitted by:	Florian C. Smeets <flo kasimir com>
2007-02-24 14:27:36 +00:00
bms
f7d6019d71 Note that IPv6 multicast forwarding is now dynamically loadable. 2007-02-24 11:41:05 +00:00
bms
3e83ac6653 Make IPv6 multicast forwarding dynamically loadable from a GENERIC kernel.
It is built in the same module as IPv4 multicast forwarding, i.e. ip_mroute.ko,
if and only if IPv6 support is enabled for loadable modules.
Export IPv6 forwarding structs to userland netstat(1) via sysctl(9).
2007-02-24 11:38:47 +00:00
piso
c553ec0508 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Approved by: re (implicit?)
2007-02-24 02:28:07 +00:00
mjacob
29bd153cd3 Redo previous newbus related change to be kinder to
multi-release support.
2007-02-23 23:13:46 +00:00
jhb
61da08318e Use tsleep() rather than msleep() with a NULL mtx parameter. 2007-02-23 23:06:10 +00:00
jhb
eeae7be803 Whitespace fix. 2007-02-23 23:05:31 +00:00
scottl
31cea9b6ce Fix a case in rman_manage_region() where the resource list would get missorted.
This would in turn confuse rman_reserve_resource().  This was only seen for
MSI resources that can get allocated and deallocated after boot.
2007-02-23 22:53:56 +00:00
netchild
902cc4aeba MFp4 (114193 (i386 part), 114194, 114195, 114200):
- Dont "return" in linux_clone() after we forked the new process in a case
   of problems.
 - Move the copyout of p2->p_pid outside the emul_lock coverage in
   linux_clone().
 - Cache the em->pdeath_signal in a local variable and move the copyout
   out of the emul_lock coverage.
 - Move the free() out of the emul_shared_lock coverage in a preparation
   to switch emul_lock to non-sleepable lock (mutex).

Submitted by:	rdivacky
2007-02-23 22:39:26 +00:00
netchild
d0c562e57c MFp4 (part of 114132):
- Fix a LOR caused by holding emul_lock and proctree_lock at once.

Submitted by:	rdivacky
2007-02-23 22:29:24 +00:00
mjacob
6b3b8d08bd Don't attempt to load illegal hard loop addresses into
an ICB. This shows up on card restarts, and usually for
2200-2300 cards. What happens is that we start up,
attempting to acquire a hard address. We end up instead
being an F-port topology, which reports out a loop id
of 0xff (or 0xffff for 2K Login f/w). Then, if we restart,
we end up telling the card to go off an acquire this loop
address, which the card then rejects. Bah.

Compilation fixes from Solaris port.
2007-02-23 21:59:21 +00:00
remko
a713b8f232 Only match on log messages containing fail,invalid,
bad or illegal. This prevents matching on systems that
have a name that matches the query.

PR:		conf/107560
Submitted by:	Christian Laursen <cfsl at pil dot dk>
MFC after:	3 days
Approved by:	imp (mentor)
2007-02-23 21:42:54 +00:00
ceri
768807b57d Use the RB_AUTOBOOT define over 0.
Approved by:	ru (mentor)
2007-02-23 21:15:14 +00:00
remko
994824acc1 Fix the cdboot twiddle display.
I created and tested this with a custom FreeSBIE cd-image.

PR:		i386/96452
Submitted by:	Yuichiro Goto <y7goto at gmail dot com>
MFC after:	3 days
Approved by:	imp (mentor)
2007-02-23 21:07:44 +00:00
brian
c3843b2cca Account for di_blocks allocations when IN_SPACECOUNTED is set in an
inode's i_flag.

It's possible that after ufs_infactive() calls softdep_releasefile(),
i_nlink stays >0 for a considerable amount of time (> 60 seconds here).
During this period, any ffs allocation routines that alter di_blocks
must also account for the blocks in the filesystem's fs_pendingblocks
value.

This change fixes an eventual df/du discrepency that will happen as
the result of fs_pendingblocks being reduced to <0.

The only manifestation of this that people may recognise is the
following message on boot:

    /somefs: update error: blocks -N files M

at which point the negative pending block count is adjusted to zero.

Reviewed by:	tegge
MFC after:	3 weeks
2007-02-23 20:23:35 +00:00
piso
baf2de77c9 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Approved by: re (implicit?)
2007-02-23 20:11:27 +00:00
jhb
2e25469b76 Use ih_filter instead of ih_handler in a couple of places. This fixes
most INTR_FAST handlers on i386.

Reviewed by:	piso
2007-02-23 20:03:24 +00:00
jhb
a6f25664a8 Drop the global kernel linker lock while executing the sysinit's for a
freshly-loaded kernel module.  To avoid various unload races, hide linker
files whose sysinit's are being run from userland so that they can't be
kldunloaded until after all the sysinit's have finished.

Tested by:	gallatin
2007-02-23 19:46:59 +00:00
imp
bba840433b Catchup with filters 2007-02-23 19:41:34 +00:00
ariff
fb9e9fec1a - Revert arguments for several functions to pre bus_get_dma_tag()
changes. Each softc contains information about their own device_t,
  use that instead.
- bus_setup_intr() -> snd_setup_intr().
2007-02-23 19:41:16 +00:00
ariff
6a57a4f091 - Compile time compatibility for pre/post newbus API (intr filter)
changes. This should ease the job of maintaining codebase since much
  of the regression tests are done across os versions.
- bus_setup_intr() -> snd_setup_intr().
2007-02-23 19:40:13 +00:00
ariff
b702560df4 Use snd_setup_intr() instead of bus_setup_intr() , like other drivers. 2007-02-23 19:39:06 +00:00
thompsa
82cd4163b4 Move the lock init until after if_alloc in case the allocation fails and we
free the softc and return.

MFC after:	3 days
2007-02-23 19:37:55 +00:00
emax
33ad295701 Check that the length of the received message is at least as big as a PDU
before we use pdu->len.

Submitted by:	Iain Hibbert
MFC after:	3 days
2007-02-23 19:37:47 +00:00
imp
7e923baf39 Catchup with filters 2007-02-23 19:34:52 +00:00
imp
00aa776630 Catchup to filters by piso. 2007-02-23 19:27:49 +00:00
remko
06cc268581 Move to the preferred syntax for nice (-n) instead
of the depricated one.

PR:		conf/108611
Submitted by:	TAOKA Fumiyoshi <fmysh at iijmio-mail dot jp>
Approved by:	imp (mentor)
2007-02-23 18:44:20 +00:00
jls
888dd25b3f Make cu/tip handle when $HOME is not set in the environment.
Approved by: philip
Submitted by: ale
PR: bin/108775
2007-02-23 18:41:12 +00:00
schweikh
6a2b828982 Correct two grammos. 2007-02-23 16:50:17 +00:00
jhb
e21fb2b555 Use 'pause' in several places rather than trying to tsleep() on NULL (which
triggers a KASSERT) or local variables.  In the case of kern_ndis, the
tsleep() actually used a common sleep address (curproc) making it
susceptible to a premature wakeup.
2007-02-23 16:25:08 +00:00
jhb
401f7aaf8a Add a new kernel sleep function pause(9). pause(9) is for places that
want an equivalent of DELAY(9) that sleeps instead of spins.  It accepts
a wmesg and a timeout and is not interrupted by signals.  It uses a private
wait channel that should never be woken up by wakeup(9) or wakeup_one(9).

Glanced at by:	phk
2007-02-23 16:22:09 +00:00
piso
0e74f15f22 Bump __FreeBSD_version after newbus api modification.
Reviewed by: re@
Approved by: re@
2007-02-23 16:21:08 +00:00
piso
817755e26a o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

  o add an int return code to all fast handlers

  o retire INTR_FAST/IH_FAST

  For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

  Approved by: re (implicit?)
2007-02-23 15:55:37 +00:00
rwatson
a29076f446 More unnecessary include reduction. 2007-02-23 14:39:04 +00:00
netchild
9ff48da7de MFp4 (114068):
Use bus_get_dma_tag() to obtain the parent DMA tag to make the drivers
        a little bit more non-ia32/amd64 friendly.

        There is no man page for bus_get_dma_tag, so this is modelled after
        rev. 1.62 of src/sys/dev/sound/pci/es137x.c by marius.

        Inspired by:	commit by marius
2007-02-23 13:47:34 +00:00
piso
6a2ffa86e5 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
rwatson
7b48c9d783 Remove many unneeded includes, update copyright. 2007-02-23 11:21:26 +00:00