The script that generates these makefiles was changed to modify LIBADD
rather than LDADD/DPADD, but the makefile itself was also changed in a
slightly different way.
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
r259397 (it contained the CAM_EXTLUN_VALID bit) and I added the
same type name with a different set of values back in r291716.
The old ccb_xflags enumeration still exists in FreeBSD stable/10.
Shift all of the new values by one bit to avoid compatibility
issues when merged to stable/10.
MFC after: 3 days
Sponsored by: Spectra Logic
Latest update of locales introduced abbreviated month that follows the regionale
rules meaning that they can be of variable length instead of being arbitrary
truncated to top 3 characters.
To fix alignement, ls now computes the visible length of the abbreviated month,
pads the shorter month with spaces in order to make sure everything is properly
aligned
Reviewed by: ache, ed, jilles
Differential Revision: https://reviews.freebsd.org/D4239
When converting from binary to ELF, elfcopy creates symbols
_binary_<filename>_start_, _binary_<filename>_end, and
_binary_<filename>_size. For compatibility with GNU objcopy (and to
produce sensible symbol names) the extension must be stripped off.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4238
Debug data files are now built by default with 'make buildworld' and
installed with 'make installworld'. This facilitates debugging but
requires more disk space both during the build and for the installed
world. Debug files may be disabled by setting WITHOUT_DEBUG_FILES=yes
in src.conf(5).
Reviewed by: bdrewery, eadler, vangyzen
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4018
from 1500 to 1496 bytes. The MTU should remain at 1500, extending the
frame size as per IEEE 802.3. Adding IFCAP_VLAN_MTU to the
if_capabilities field in the smsc driver solves the problem. The
datasheet for the LAN9512 chip, section 3.2.3 states that the chip
supports the extended frame.
Submitted by: rpp@ci.com.au
MFC after: 1 week
PR: 205050
new headers x86/include x86_var.h and x86_smp.h.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4358
The pcb is saved at the top of the kernel stack on x86 platforms.
The initial kenrel stack pointer is set in the TSS so that the trapframe
from user -> kernel transitions begins directly below the pcb and grows
down.
The XSAVE changes moved the FPU save area out of the pcb and into a
variable-sized area after the pcb. This required updating the expressions
to calculate the initial stack pointer from 'stacktop - sizeof(pcb)' to
'stacktop - sizeof(pcb) + FPU save area size'.
The i386_set_ioperm() system call allows user applications to access
individual I/O ports via the I/O port permission bitmap in the TSS.
On FreeBSD this requires allocating a custom per-process TSS instead of
using the shared per-CPU TSS.
The expression to initialize the initial kernel stack pointer in the
per-process TSS created for i386_set_ioperm() was not properly updated
after the XSAVE changes. Processes that used i386_set_ioperm() would
trash the trapframe during subsequent context switches resulting in
panics from memory corruption.
This changes fixes the kernel stack pointer calculation for the per-process
TSS.
Reviewed by: kib, n_hibma
Reported by: n_hibma
MFC after: 1 week
This will save time generating dependency files that we didn't expect
due to cases where SRCS!=OBJS or for building custom targetted objects
in Makefiles that do not end up in the DEPENDOBJS list.
This uses a bmake trick to modify CFLAGS based on ${.TARGET}. A
.PARSEDIR check is done for the sake of MFC safety.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Rather than try to guess at all of the OBJS variables just use SRCS
using the same patterns that mkdep does. This also fixes a mistake
where dependencies were being generated with FAST_DEPEND when they were
not for mkdep. This happens when OBJS!=SRCS as is the case in
gnu/lib/csu where SRCS has 1 file and OBJS has several other files that
does not even contain the 1 SRCS file. Generally in these cases the
OBJS have custom dependencies defined in their Makefile. If we generate
dependencies for those and then load a .depend file, then .IMPSRC may
contain duplicate sources and lead to errors such as:
cc: error: cannot specify -o when generating multiple output files
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
bsd.lib.mk and bsd.prog.mk already depend all objs on headers in SRCS if
there is not yet a depend file. The headers in SRCS are never built or
installed. After 'make depend' the header was already added as a proper
dependency on the objects where needed.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
include the following list of changes:
- Added eswitch ACL table management
Introduce API for managing ACL table.
This API include the following features:
1) vlan filter - for VST/VGT+ support.
2) spoofcheck.
3) robust functionality to allow/drop general untagged/tagged traffic.
4) support for both ingress and egress ACL types.
- Added loopback filter to the vacl table.
- Added multicast list set in the vPort context
- Added promiscuous mode set in the vPort context
- Set the vlan list in vPort context
1) Check caps if VLAN list is not longer than FW supports
2) Set MODIFY_NIC_VPORT_CONTEXT command
- Changed MLX5_EEPROM_MAX_BYTES from 48 to 32 so that a single EEPROM
reading cannot cross the 128-byte boundary. Previously reading the
MCIA register was done in batches of 48 bytes. The third reading
would then by-pass the 127th byte, which means that part of the low
page and part of the high page would be read at the same time, which
created a bug:
1st: 0-47 bytes
2nd: 48-95 bytes
3rd: 96-143 bytes
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4411
driver. This includes binding all interrupt and worker threads
according to the RSS configuration, setting up correct Toeplitz
hashing keys as given by RSS and setting the correct mbuf
hashtype for all received traffic.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4410
clock_gettime(2) on ARMv7 and ARMv8 systems which have architectural
generic timer hardware. It is similar how the RDTSC timer is used in
userspace on x86.
Fix a permission problem where generic timer access from EL0 (or
userspace on v7) was not properly initialized on APs.
For ARMv7, mark the stack non-executable. The shared page is added for
all arms (including ARMv8 64bit), and the signal trampoline code is
moved to the page.
Reviewed by: andrew
Discussed with: emaste, mmel
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4209
Cleanup setting of ctime/mtime/birthtime: do not set IN_ACCESS or
IN_UPDATE, then clear them with ufs_itimes(), making transient
(possibly inconsistent) change to the times, and then copy
user-supplied times into the inode. Instead, directly clear IN_ACCESS
or IN_UPDATE when user supplied the time, and copy the value into the
inode.
Minor inconsistency left is that the inode ctime is updated even when
birthtime update attempt is performed on a UFS1 volume.
Submitted by: bde
MFC after: 2 weeks
completion events can be moderated in the same way like RX completion
events. Expose this functionality by a sysctl variable.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4409
Set the port MTU and then query it and report if any problems instead.
MFC after: 1 week
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4408
make. Add support for generating powerpc64 qemu images. We
can generate them, but there's something wrong booting them.
This also simplifies the user config files a bit, and removes
bits no longer true.
TLV routines use 'uint8_t *', NVRAM code uses caddr_t. Just cast to
required type to fix the warning.
Required to build with -Werror=pointer-signg.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4391
The header is not present on FreeBSD, but exists on OmniOS where sfxge
common code is used as well.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4390
It is better do not mix TxQ creation and receive event flags since only
checksum flags are applicable to TxQ.
Also it will allow to add a new TxQ creation specific flags.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4389
When writing the MUM firmware the chunk size must be equal to the erase
size.
Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4388
Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4387
kyua 0.11's version of report-junit was rendering non-printable characters
Upgrade to kyua 0.12 to obtain a fixed version of the command
Output verified with python 2.7.10's xml.dom.minidom module
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
