BSD ar currently does not support the /SYM64/ 64-bit symbol table, and
previously truncated to 32-bits, silently producing corrupted archives
larger than 4GB.
This is another overflow case in addtion to r342575.
PR: 234454
Reported by: Aijaz Baig, imp
MFC after: 2 weeks
MFC with: r342575
Sponsored by: The FreeBSD Foundation
The aim of this manual page is to act as a style and formatting guide for
mdoc(7) manual pages. Currently, mdoc(7) does not provide much guidance
when it comes to the usage of macros making it difficult to format manual
pages in a consistent way.
Reviewed by: bcr
Approved by: bcr (doc), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18394
BSD ar currently does not support the /SYM64/ 64-bit symbol table, and
previously truncated to 32-bits, silently producing corrupted archives
larger than 4GB.
Note that this is only a partial fix; additional checks will come.
PR: 234454
Reported by: Aijaz Baig, imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
makes for difficulty with hidden Samba shares; shares with $ at the end
of their name. This enables the use of ${DOLLAR} to work around this.
Reviewed by: bcr (man page)
Approved by: trasz
Differential Revision: https://reviews.freebsd.org/D7048
SVN r340744 erroneously changed pfind() to return any process including
zombies and pfind_any() to return only non-zombie processes.
In particular, this caused kill() on a zombie process to fail with [ESRCH].
There is no direct test case for this but /usr/tests/bin/sh/builtins/kill1.0
occasionally triggers it (as reported by lwhsu).
Conversely, returning zombies from pfind() seems likely to violate
invariants and cause panics, but I have not looked at this.
PR: 233646
Reviewed by: mjg, kib, ngie
Differential Revision: https://reviews.freebsd.org/D18665
The long double aliases of double functions are only exposed as aliases if
LDBL_MANT_DIG is 53 (same as DBL_MANT_DIG). Without float.h included these
files were not exposing weak aliases as expected, leading to link failures
if programs use the *l functions. This should fix editors/calligra on
targets with 64-bit long double, which uses erfl and erfcl. Found on
powerpc64.
Reviewed by: kargl@
This is primarily aimed at failed updates due to package conflicts, and
affects treatment of failed updates. Whereas before potentially a large
number of packages would need to be synced for each attempt, they can now
be persisted. Requires rsync. There may be better ways to implement this,
e.g. using secondary cache path that is only used on followup attempts and
then wiped on success, which avoids polluting current cache.
Mutexes in I/O path there were used twice per I/O to atomically access
several variables to close and/or destroy the device on last request
completion. I found the way to fit all required info into one integer,
suitable for atomic operations. It opened race window on device close,
but addition of timeout to the msleep() there should cover it.
Profiling shows removal of significant spinning time on those mutexes
and IOPS increase from ~600K to >800K to NVMe on 72-core systems.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Previous code typically crashed in case of NVMe device unplug or even clean
detach while some I/Os are still in flight. To fix this the new code calls
disk_gone() and waits for confirmation of all references gone before calling
disk_destroy(), freeing other resources and allowing controller detach.
While there, fix disk lists locking and reimplement unit numbers assignment.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
The FreeBSD Foundation and NLnet Foundation sponsored the original work,
and the Foundation sponsored followon work and integration efforts by
bz@.
Sponsored by: The FreeBSD Foundation
- Add missing parameters to flags in the description of available options.
- Remove spaces between alternative parameters and "|".
- Align descriptions of options to the longest option.
- Use em dash instead of a hyphen.
Reviewed by: bcr
Approved by: doc (bcr)
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18608
We need to tell vm_fault the reason for the fault was because we tried to
execute from the memory location. Without this it may return with success
as we only request read-only memory, then we return to the same location
and try to execute from the same memory address. This leads to an infinite
loop raising the same fault and returning to the same invalid location.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18511
Addition of the new errno values requires adding new elements to
sys_errlist array, which is actually ABI-incompatible, since ELF
records the object size. Expand array in advance to 150 elements so
that we have our users to go over the issue only once, at least until
more than 53 new errors are added.
I did not bumped the symbol version, same as it was not done for
previous increases of the array size. Runtime linker only copies as
much data into binary object on copy relocation as the binary'object
specifies. This is not fixable for binaries which access sys_errlist
directly.
While there, correct comment and calculation of the temporary buffer
size for the message printed for unknown error. The on-stack buffer
is used only for the number and delimiter since r108603.
Requested by: mckusick
Reviewed by: mckusick, yuripv
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18656
is specified by its number (index), starting with zero. Previously,
sometimes users would try to literally invoke `acpiconf -i batt' in
their console and become confused as to why this did not work.
Approved by: bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D18659
If invalid, return EINVAL. Note that inode check-hashes greatly
reduce the chance that these errors will go undetected.
Reported by: Christopher Krah <krah@protonmail.com>
Reported as: FS-5-UFS-2: Denial Of Service in nmount-3 (ffs_read)
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
M sys/fs/ext2fs/ext2_vnops.c
M sys/kern/vfs_subr.c
M sys/ufs/ffs/ffs_snapshot.c
M sys/ufs/ufs/ufs_vnops.c
Note that this commit brings only formatting changes that were done
during the final review of the illumos change, because FreeBSD got the
main changes before illumos.
illumos/illumos-gate@04e563565204e5635652https://www.illumos.org/issues/5882
This is an import of the temporary pool names functionality from ZoL:
e2282ef57e26b42f3f9d2f3ec9006100d2a8c92f83e9986f6e023bbe6f01
It is intended to assist the creation and management of virtual machines
that have their rootfs on ZFS on hosts that also have their rootfs on
ZFS. These situations cause SPA namespace collisions when the standard
name rpool is used in both cases. The solution is either to give each
guest pool a name unique to the host, which is not always desireable, or
boot a VM environment containing an ISO image to install it, which is
cumbersome.
MFC after: 1 week
Sponsored by: Panzura
Due to hardware errata in Aero controllers, reads to certain
fusion registers could intermittently return all zeroes.
This behavior is transient in nature and subsequent reads will return
valid value.
Fix:
For Aero controllers, any read will retry the read operations
from certain registers for maximum three times, if read returns zero.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
For Aero adapters-
1. Driver will use 32 bit atomic descriptor to fire IOs and DCMDs.
2. Driver will use 64 bit request descriptor to fire IOC INIT.
3. If Aero firmware supports 32 bit atomic descriptor, then only driver will use it
otherwise driver will use 64 bit request descriptor.
For rest of adapters(Ventura, Invader and Thunderbolt), driver will use 64 bit request
descriptors only.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
Driver will throw a warning message when a Configurable secure type controller is
encountered.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
Due to HW Errta on Aero/Sea A0 chipset on secure boot mode & on heavy IO load,
sometimes read operation on MPT Fusion registers will give zero value,
So, as a workaround driver will retry the MPT Fusion register
read operation for max three times upon reading zero value form these
registers.
Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
Enable atomic type descriptor support only for Sea & Aero cards,
due to HW errata this atomic descriptor support has to be disabled
on Ventura cards.
Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
illumos/illumos-gate@04e563565204e5635652https://www.illumos.org/issues/5882
This is an import of the temporary pool names functionality from ZoL:
https://github.com/zfsonlinux/zfs/commit/
e2282ef57edc79cdce2a4b9b7e3333c56494a807
https://github.com/zfsonlinux/zfs/commit/
26b42f3f9d03f85cc7966dc2fe4dfe9216601b0e
https://github.com/zfsonlinux/zfs/commit/
2f3ec9006146844af6763d1fa4e823fd9047fd54
https://github.com/zfsonlinux/zfs/commit/
00d2a8c92f614f49d23dea5d73f7ea7eb489ccf1
https://github.com/zfsonlinux/zfs/commit/
83e9986f6eefdf0afc387f06407087bba3ead4e9
https://github.com/zfsonlinux/zfs/commit/
023bbe6f017380f4a04c5060feb24dd8cdda9fce
It is intended to assist the creation and management of virtual machines
that have their rootfs on ZFS on hosts that also have their rootfs on
ZFS. These situations cause SPA namespace collisions when the standard
name rpool is used in both cases. The solution is either to give each
guest pool a name unique to the host, which is not always desireable, or
boot a VM environment containing an ISO image to install it, which is
cumbersome.
As a side note, this commit includes the removal of `zpool import -r`,
which previously did nothing.
patch [Magnifier] (14.3 KB) Richard Yao, 2015-04-30 04:33 PM
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <agapon@panzura.com>
Added deviceID's for Sea,Aero to mpr Driver
Aero:
0x00E0 Invalid
0x00E1 Configurable Secure
0x00E2 Hard Secure
0x00E3 Tampered
Sea:
0x00E4 Invalid
0x00E5 Configurable Secure
0x00E6 Hard Secure
0x00E7 Tampered
For Tampered & Invalid type cards, driver will claim the device & quit the probe function with below error message,
"HBA is in Non Secure mode"
for Configurable Secure type cards, driver will display below message in .probe() callback function,
"HBA is in Configurable Secure mode"
Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
Following list of changes done in the driver as a part of TM handling on the NVMe drives.
Below changes are only applicable on NVMe drives and only when custom NVMe TM handling bit is set to zero by IOC.
1. Issue LUN reset & Target reset TMs with Target reset method field set to Protocol Level reset (0x3),
2. For LUN & target reset TMs use the timeout value as ControllerResetTO value provided by firmware using PCie Device Page 0,
3. If LUN reset fails to terminates the IO then directly escalate to host reset instead of going for target reset TM,
4. For Abort TM use the timeout value as NVMeAbortTO value given by the IOC using Manufacturing Page 11,
5. Log message "PCie Host Reset failed" message up on receiving P
Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
typedef struct mps_pass_thru
{
uint64_t PtrRequest;
uint64_t PtrReply;
uint64_t PtrData;
uint32_t RequestSize;
uint32_t ReplySize;
uint32_t DataSize;
uint32_t DataDirection;
uint64_t PtrDataOut;
uint32_t DataOutSize;
uint32_t Timeout;
} mps_pass_thru_t, * ptrmpssas_pass_thru_t;
In the above mps_pass_thru structure; Application expects PrtReply buffer
should contain both MPI reply followed by sense data. So, updated driver
to copy sense data at PtrReply + sizeof(MPI2 reply) location where
application wants the driver to copy back the sense data info.
Submitted by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
illumos/illumos-gate@049ba636fa049ba636fahttps://www.illumos.org/issues/9630
Rename and destroy are very useful operations that deserve to be in
libzfs_core. And they are not hard to implement too.
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
By default, bectl is setting the jail 'name' parameter to the boot
environment name, which causes an error when the boot environment name is
not a valid jail name. With the attached fix, when no name is supplied, the
default jail name will be the jail id - this is is the same behavior as the
jail command.
Additionally, this commit addresses two other bugs that prevented unjailing
in scenarios where the jail name does not match the boot environment name:
1. In 'bectl_locate_jail', 'mountpoint' is used to resolve the boot
environment path, but really 'mounted' should be used. 'mountpoint' is the
path where the zfs dataset will be mounted. 'mounted' is the path where
the dataset is actually mounted.
2. in 'bectl_search_jail_paths', 'jail_getv' would fail after the first
call. Which is fine, if the boot environment you're unjailing is the next
one up. According to 'man jail_getv', it's expecting name and value
strings. 'jail_getv' is being passed an integer for the lastjid, so amend
that to use a string instead.
Test cases have been amended to reflect the bugs found.
PR: 233637
Submitted by: Rob <rob.fx907_gmail.com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18607
This value remained unchanged for 15 years, and now this bump reduces
lock spinning in GEOM and BIO layers while doing ~1.6M IOPS to 4 NVMe
on 72-core system from ~25% to ~5% by the cost of additional 28KB RAM.
While there, align struct mtx_pool fields to cache lines.
MFC after: 1 month
CAM does not require SIM lock since FreeBSD 10.4, and NVMe code never
required it at all, using per-queue locks instead. This formally allows
parallel request submission in CAM mode as much as single per-device and
per-queue locks of CAM allow.
MFC after: 1 month
