There's no need to worry about potential backwards compatibility issues
in a brand-new architecture, so avoid stack PROT_EXEC as with arm64.
Discussed with: br
update of devicetree to 4.19 in r340337.
Our build system doesn't provide dependencies for included DTS files, so
nobody noticed this issue for long time.
PR: 235362
MFC after: 1 week
from its parent so that LOG_PERROR would work. However, this caused
dhclient(8)'s stdio streams to remain open across daemonization, breaking
the ability to capture its foreground output as done in netconfig_ipv4.
Fix this by reverting r341692 and instead passing the parent's stderr
descriptor as an argument to cap_openlog() only when LOG_PERROR is specified
in logopt.
PR: 234514
Suggested by: markj
Reported by: Shawn Webb
Reviewed by: markj, oshogbo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18989
The QorIQ SoCs don't actually support multicast interrupts, and the
references state explicitly that multicast is undefined behavior. Avoid the
undefined behavior by binding to only a single CPU, using a quirk to
determine if this is necessary.
MFC after: 3 weeks
There are few places in interrupt handler where the driver
lock is dropped; ensure that device is still running before
processing remaining ring entries.
PR: 192641
MFC after: 5 days
Certain versions of Sandisk x400 firmware can hang under extremely
heavly load of large I/Os for prolonged periods of time. Newer /
current versions work fine, and should be used where possible. Where
not possible, this quirk ensures that I/O requests are limited to 128k
to avoids the bug, even under extreme load. Since MAXPHYS is 128k,
only users with custom kernels are at risk on the older firmware.
Once all known users of the older firmware have upgraded, this quirk
will be removed.
Sponsored by: Netflix, Inc.
Initialize the static kenv in pmap_cold() and fetch user opinion on
vm.pmap.pae_mode tunable if hardware is capable. Note that the static
environment is reinitilized in init386() later when paging is enabled.
Reviewed by: bde
Discussed with: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
When running several builders in parallel, on QEMU, with 8GB of
memory, a fatal kernel trap (0x300 (data storage interrupt))
caused by llan driver is sometimes observed, when the system
starts to run out of swap space.
This happens because, at llan_intr(), a phyp call to add a
logical LAN buffer is always made when llan_add_rxbuf() fails,
even if it fails to allocate a new buffer.
PR: 235489
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D19084
%r8, %r10, and on non-KPTI configuration %r9 were not restored on fast
return from a syscall.
Reviewed by: markj
Approved by: so
Security: CVE-2019-5595
Sponsored by: The FreeBSD Foundation
MFC after: 0 minutes
when TEKEN_CONS25 is configured. Fix this by adding a function to
set the flag that enables the fix and always calling this function
for syscons.
Expand the man page for teken_set_cons25(). This function is not
very useful since it can only set but not clear 1 flag. In practice,
it is only used when TEKEN_CONS25 is configured and all that does is
choose the the default emulation for syscons at compile time.
are terminated by 2 NULs, but only 1 NUL was zapped. Zapping only 1
NUL just splits the first string into an empty string and a corrupted
string. All other strings in static hints and env remained live early
in the boot when they were supposed to be disabled.
Support calling init_static_kenv() very early in the boot, so as to
use the env very early in the boot. Then the pointer to the loader
env may change after the first call due to enabling paging or otherwise
remapping the pointer. Another call is needed to register the change.
Don't use the previous pointer in this (or any) later call.
Reviewed by: kib
Changelist:
- Replace ND, D and RD macros with nm_prdis, nm_prinf, nm_prerr
and nm_prlim, to avoid possible naming conflicts.
- Add netmap_krings_mode_commit() helper function and use that
to reduce code duplication.
- Refactor pipes control code to export some functions that
can be reused by the veth driver (on Linux) and epair(4).
- Add check to reject API requests with version less than 11.
- Small code refactoring for the null adapter.
MFC after: 1 week
Bump up MAX_HWCNT and MAX_EXCNT to 32 when ACPI is enabled. These are
the sizes of the hwregions and exregions arrays respectively. ACPI
firmware typically has more memory regions and the current value of
16 is not sufficient for some platforms.
This commit fixes a failure seen with AMI firmware on Cavium's Sabre
ThunderX2 reference platform. This platform needs 21 physical memory
regions and 18 excluded regions to boot correctly with the current
firmware release.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19073
It appears idling via 'wait' on e5500 causes strange behaviors, such as
top(1) simply hanging sporadically, until input. Until this can possibly be
sorted out (interrupt issue?), just don't idle on this hardware. The SoCs
are low power already, and the wait state doesn't save much anyway.
List is a 'read'-type operation that does not modify shared state; it's safe
for multiple thread to proceed concurrently. This is reflected in the vnode
operation LISTEXTATTR locking protocol specification, which only requires a
shared lock.
(Similar to previous r248933.)
Reported by: Case van Rij <case.vanrij AT isilon.com>
Reviewed by: kib, mjg
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19082
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
When libthr is statically linked into the binary, order of the
constructors execution is not deterministic. It is possible for the
application constructor to use pthread_mutex_* functions before the
libthr initialization was done.
Handle it by:
- making thr_malloc.c locking functions operational when curthread is not
yet set;
- making __thr_malloc_init() idempotent, allowing more than one call to it;
- unconditionally calling __thr_malloc_init() before initializing
a process-private mutex.
Reported and tested by: mmel
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
controller datasheet revision 3.3, in the context of Ethernet
MACs the control data describing the packet buffers typically
are named "descriptors". Each of these descriptors references
one buffer, multiple of which a packet can be composed of.
By contrast, in comments, messages and the names of structure
members, iflib(4) refers to DMA resources employed for RX and
TX buffers (rather than control data) as "desc(riptors)".
This odd naming convention of iflib(4) made reviewing r343085
and identifying wrong and missing bus_dmamap_sync(9) calls in
particular way harder than it already is. This convention may
also explain why the netmap(4) part of iflib(4) pairs the DMA
tags for control data with DMA maps of buffers and vice versa
in calls to bus_dma(9) functions.
Therefore, change iflib(4) to refer to buf(fers) when buffers
and not the usual understanding of descriptors is meant. This
change does not include corrections to the DMA resources used
in the netmap(4) parts. However, it revises error messages to
state which kind of allocation/creation failed. Specifically,
the "Unable to allocate tx_buffer (map) memory" copy & pasted
inappropriately on several occasions was replaced with proper
messages.
o Enhance some other error messages to indicate which half - RX
or TX - they apply to instead of using identical text in both
cases and generally canonicalize them.
o Correct the descriptions of iflib_{r,t}xsd_alloc() to reflect
reality; current code doesn't use {r,t}x_buffer structures.
o In iflib_queues_alloc():
- Remove redundant BUS_DMA_NOWAIT of iflib_dma_alloc() calls,
- change the M_WAITOK from malloc(9) calls into M_NOWAIT. The
return values are already checked, deferred DMA allocations
not being an option at this point, BUS_DMA_NOWAIT has to be
used anyway and prior malloc(9) calls in this function also
specify M_NOWAIT.
Reviewed by: shurd
Differential Revision: https://reviews.freebsd.org/D19067
ci.FreeBSD.org does not have access to a DNS resolver/network (unlike my test
VM), so in order for the test to pass on the host, it needs to avoid the DNS
lookup by using the numeric host address representation.
PR: 235200
Reviewed by: asomers, lwhsu
Approved by: emaste (mentor)
MFC after: 2 weeks
MFC with: r343362, r343365, r343367-r343368, r343461
Differential Revision: https://reviews.freebsd.org/D19026
Compiling a GENERIC kernel for i386 with clang 8.0 results in the
following warning:
/usr/src/sys/i386/i386/sys_machdep.c:542:40: error: 'sizeof ((ldt))' will return the size of the pointer, not the array itself [-Werror,-Wsizeof-pointer-div]
nldt = pldt != NULL ? pldt->ldt_len : nitems(ldt);
^~~~~~~~~~~
/usr/src/sys/sys/param.h:299:32: note: expanded from macro 'nitems'
#define nitems(x) (sizeof((x)) / sizeof((x)[0]))
~~~~~~~~~~~ ^
Indeed, 'ldt' is declared as 'union descriptor *', so nitems() is not
the right way to determine the number of LDTs. Instead, the NLDT define
from sys/x86/include/segments.h should be used.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19074
Currently, the trap code switches to the the temporary stack in the dbtrap
section. It works in most cases, but in the beginning of the execution, the
temp stack is being used, as starting in the powerpc_init() code.
In this current scenario, the stack is being overwritten, which causes the
return of breakpoint() to take abnormal execution.
This current patchset create a small stack to use by the dbtrap: codepath
avoiding the corruption of the temporary stack.
PR: 224872
Submitted by: breno.leitao_gmail.com
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D14484
With r319610, sesutil started twiddling the bits of every SES device.
Not everything is a disk slot, there are also fan controllers, temperature
sensors, even power supplies, among other things controlled by SES.
Add a type check to make sure we are only operating on device slot and array
device slot elements. Other type elements will be skipped, but it would be
simple to add additional cases for controlling the ident LEDs of other
element types (which are not necessarily the same bits).
Rather than doing raw bit manipulation of an unstructured byte array using
unnamed numeric constants, leverage existing code abstractions.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D19052
Otherwise the lock might recurse in faultin() if the process is
swapped out.
Reported by: zeising
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On CPUs supporting cmpxchg8b, fetch is performed by cmpxchg8b on
corresponding CPU slot, which unconditionally write to the slot. If
for that slot, the owner CPU increments it, then both CPUs might run
the cmpxchg8b instruction concurrently and this might race and
override the incremental write. So the counter update would be lost.
Fix it by implementing fetch as IPI and accumulation of result. It is
acceptable for rare counter64 fetch operation to be more expensive.
Diagnosed and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
