it should also be MI. The problem here arises when ld ends up linking a
link-once section with relocations against sections that point back to it
that are as yet unresolved. Instead of piecemeal finding sections we
think are potentially subject to this issue, just defer processing for
sections that have yet to be relocated instead of immediately bailing.
in "struct vm_object". This is required to make it possible to account
for per-jail swap usage.
Reviewed by: kib@
Tested by: pho@
Sponsored by: FreeBSD Foundation
byte-swapped versions of compile-time constants. This allows use of
bswap() and htole*() in initializers, which is required to cross-build
btxld.
Obtained from: sparc64
consequence, fill_regs() and fill_fpregs() access random data, usually
on the thread kernel stack. Most often the td_frame points to the
previous frame saved by last kernel entry sequence, but this is not
guaranteed.
For /proc/<pid>/{regs,fpregs} read access, require the thread to be in
stopped state. Otherwise, return EBUSY as is done for write case.
Reported and tested by: pho
Approved by: des (procfs maintainer)
MFC after: 1 week
Just so that I can lookup the command for the next time:
for t in `make -V TARGETS universe`; do
__MAKE_CONF=/dev/null make -f Makefile.inc1 -m $PWD/share/mk TARGET=$t \
-V OLD_FILES -V OLD_LIBS -V OLD_DIRS delete-old | \
xargs -n1|sort|uniq -c|egrep -v "^ *1 ";
done
algorithm based on the Internet-Draft "draft-leith-tcp-htcp-06.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
H-TCP was designed to provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "H-TCP: A framework for congestion control in high-speed and long-distance
networks" provides additional detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
algorithm based on the Internet-Draft "draft-rhee-tcpm-cubic-02.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
CUBIC was designed for provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "CUBIC: A New TCP-Friendly High-Speed TCP Variant" provides additional
detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
the controller to workaround silicon bug of i82557. Each reset will
re-establish link which in turn triggers MII status change
callback. The callback will try to reconfigure controller if the
controller is not i82557 to enable flow-control. This caused
endless link UP/DOWN when the workaround was enabled on non-i82557
controller.
To fix the issue, apply RX lockup workaround only for i82557.
Previously it blindly checked undocumented EEPROM location such
that it sometimes enabled the workaround for other controllers. At
this time, only i82557 is known to have the silicon bug.
This fixes a regression introduced in r215906 which enabled flow
control support for all controllers except i82557.
Reported by: Karl Denninger (karl <> denninger dot net)
Tested by: Karl Denninger (karl <> denninger dot net)
MFC after: 3 days
somewhere along the way due to mismerging r211464 in our development tree.
- Capture the essence of r211464 in NewReno's after_idle() hook. We don't
use V_ss_fltsz/V_ss_fltsz_local yet which needs to be revisited.
Sponsored by: FreeBSD Foundation
Submitted by: David Hayes <dahayes at swin edu au>
MFC after: 9 weeks
X-MFC with: r215166
As result, failed softdep_mount() might leave up to two vnodes on the
mp mountlist, preventing mnt_ref from going to zero.
Call ffs_flushfiles() after failed softdep_mount() to clean mountlist.
Initial report by: Garrett Cooper
Reproduced and tested by: pho
or detached. Normally it should be changed through user land ioctl(2)
system calls but it looks there's no apps for USB and no need.
With this patch, libpcap would detect the usbus interfaces correctly and
tcpdump(1) could dump the USB packets into PCAP format with -w option.
However it couldn't print the output to console because there's no
printer-routine at tcpdump(1).
vm_page_startup(). Specifically, the dump_avail array should be used
instead of the phys_avail array to calculate the size of vm_page_dump. For
example, the pages for the message buffer are allocated prior to
vm_page_startup() by subtracting them from the last entry in the phys_avail
array, but the first thing that vm_page_startup() does after creating the
vm_page_dump array is to set the bits corresponding to the message buffer
pages in that array. However, these bits might not actually exist in the
array, because the size of the array is determined by the current value in
the last entry of the phys_avail array. In general, the only reason why
this doesn't always result in an out-of-bounds array access is that the size
of the vm_page_dump array is rounded up to the next page boundary. This
change eliminates that dependence on rounding (and luck).
MFC after: 6 weeks
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.
The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.
Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO. The SMP CCB is
intended for SMP requests and responses. The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.
SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target. (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)
smp_all.c,
smp_all.h: New helper routines for SMP. This includes
SMP request building routines, response parsing
routines, error decoding routines, and structure
definitions for a number of SMP commands.
libcam/Makefile: Add smp_all.c to libcam, so that SMP functionality
is available to userland applications.
camcontrol.8,
camcontrol.c: Add smp passthrough support to camcontrol. Several
new subcommands are now available:
'smpcmd' functions much like 'cmd', except that it
allows the user to send generic SMP commands.
'smprg' sends the SMP report general command, and
displays the decoded output. It will automatically
fetch extended output if it is available.
'smppc' sends the SMP phy control command, with any
number of potential options. Among other things,
this allows the user to reset a phy on a SAS
expander, or disable a phy on an expander.
'smpmaninfo' sends the SMP report manufacturer
information and displays the decoded output.
'smpphylist' displays a list of phys on an
expander, and the CAM devices attached to those
phys, if any.
cam.h,
cam.c: Add a status value for SMP errors
(CAM_SMP_STATUS_ERROR).
Add a missing description for CAM_SCSI_IT_NEXUS_LOST.
Add support for SMP commands to cam_error_string().
cam_ccb.h: Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH. SMP
commands are by nature bi-directional, and we may
need to support bi-directional SCSI commands later.
Add the XPT_SMP_IO CCB. Since SMP commands are
bi-directional, there are pointers for both the
request and response.
Add a fill routine for SMP CCBs.
Add the XPT_GDEV_ADVINFO CCB. This is currently
used to fetch cached page 0x83 data from the
transport later, but is extensible to fetch many
other types of data.
cam_periph.c: Add support in cam_periph_mapmem() for XPT_SMP_IO
and XPT_GDEV_ADVINFO CCBs.
cam_xpt.c: Add support for executing XPT_SMP_IO CCBs.
cam_xpt_internal.h: Add fields for VPD pages 0x00 and 0x83 in struct
cam_ed.
scsi_all.c: Add scsi_get_sas_addr(), a function that parses
VPD page 0x83 data and pulls out a SAS address.
scsi_all.h: Add VPD page 0x00 and 0x83 structures, and a
prototype for scsi_get_sas_addr().
scsi_pass.c: Add support for mapping buffers in XPT_SMP_IO and
XPT_GDEV_ADVINFO CCBs.
scsi_xpt.c: In the SCSI probe code, first ask the device for
VPD page 0x00. If any VPD pages are supported,
that page is required to be implemented. Based on
the response, we may probe for the serial number
(page 0x80) or device id (page 0x83).
Add support for the XPT_GDEV_ADVINFO CCB.
sys/conf/files: Add smp_all.c.
mps.c: Add support for passing in a uio in mps_map_command(),
so we can map a S/G list at once.
Add support for SMP passthrough commands in
mps_data_cb(). SMP is a special case, because the
first buffer in the S/G list is outbound and the
second buffer is inbound.
Add support for warning the user if the busdma code
comes back with more buffers than will work for the
command. This will, for example, help the user
determine why an SMP command failed if busdma comes
back with three buffers.
mps_pci.c: Add sys/uio.h.
mps_sas.c: Add the SAS address and the parent handle to the
list of fields we pull from device page 0 and cache
in struct mpssas_target. These are needed for SMP
passthrough.
Add support for the XPT_SMP_IO CCB. For now, this
CCB is routed to the addressed device if it supports
SMP, or to its parent if it does not and the parent
does. This is necessary because CAM does not
currently support SMP-only nodes in the topology.
Make SMP passthrough support conditional on
__FreeBSD_version >= 900026. This will make it
easier to MFC this change to the driver without
MFCing the CAM changes as well.
mps_user.c: Un-staticize mpi_init_sge() so we can use it for
the SMP passthrough code.
mpsvar.h: Add a uio and iovecs into struct mps_command for
SMP passthrough commands.
Add a cm_max_segs field to struct mps_command so
that we can warn the user if busdma comes back with
too many segments.
Clear the cm_reply when a command gets freed. If
it is not cleared, reply frames will eventually get
freed into the pool multiple times and corrupt the
pool. (This fix is from scottl.)
Add a prototype for mpi_init_sge().
sys/param.h: Bump __FreeBSD_version to 900026 for the for the
inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
CAM CCBs.
versions of FreeBSD. In fact we are already missing a lot of conditional
code necessary to support older versions of FreeBSD, including alternatives
for vital functionality not yet provided by the respective subsystem back
then (see for example r199663). So this change shouldn't actually break
this driver on versions of FreeBSD that were supported before. Besides,
this driver also isn't maintained as an multi-release version outside of
the main repository, so removing the conditional code shouldn't be a
problem in that regard either.
- Sprinkle some more const on tables.
with filesystems created under MacOS X ZFS port. This is kind of filesystem
corruption (we don't allow for setting empty ACLs), so make acl_get_file(3)
and related syscalls fail with EINVAL in that case. In theory, we could
return empty ACL to userland, but I'm afraid this would break some code.
MFC after: 3 days
i.e. alignment, max_address, max_iosize and segsize (only max_address is
thought to have an negative impact regarding this issue though), after
calling ata_dmainit() either directly or indirectly so these values have
no effect or at least no effect on the DMA tags and the defaults are used
for the latter instead. So change the drivers to set these parameters
up-front and ata_dmainit() to honor them.
This file was missed in r216013.
Submitted by: nwhitehorn
kern.bootfile sysctl). Prior to this commit, crashinfo(8) only looks at
/boot/*/kernel; this includes the usual places where kernels reside, so
for most systems this will have no effect.
Approved by: jhb
MFC after: 3 days
