x86/cpu_machdep.c now needs to include elan_mmcr.h when CPU_ELAN is set.
While here, also remove the now unneeded inclusion of isareg.h in i386
and amd64 vm_machdep.c.
Reported by: lwhsu
MFC after: 14 days
X-MFC with: r331878
When I moved these functions from i386 and amd64 to x86 I dropped their
prototype declarations (that were correct) and left only their definitions
that became incorrect.
Reported by: bde
MFC after: 15 days
X-MFC with: r331878
Because I didn't see any reason not too.
I've been making some changes to the code and couldn't help but notice
that the i386 and am64 code was nearly identical.
MFC after: 17 days
platforms. Original commit message as follows:
Only use CPUs in the domain the device is attached to for default
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
Originally KVM set %eax to 0 in the cpuid leaf 0x4000000 rather than
to the highest supported leaf in the hypervisor "branch". Detect this
case and fixup the %eax value so that the hypervisor is still
detected.
Reported by: jpaetzel
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14810
Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
from the i8254 driver when I created separate mutexes for each. The i8254
driver could be the active timecounter, leading to recursion during mutex
profiling, but the atrtc driver cannot be a timecounter, so it isn't needed.
un-function-like RTC_LOCK/UNLOCK macro usage into normal function calls.
Since there is no longer any need to handle register access from a debugger
context, those function calls can just be regular mutex lock/unlock calls.
Requested by: bde
command handler which provided much the same information. Removing the
possibility of accessing the hardware regs from the debugger context
paves the way for simplifying the locking code in the driver.
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
Such items may be allocated in the I/O path used by the dumper,
potentially causing the dump to fail. Since there is some precedent
in the DMAR driver for avoiding this problem using _NODUMP, apply
this workaround to the zone as well.
Reported and tested by: mmacy
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14422
Do not use C constant suffixes. Bit values are small enough to not
require typing, despite they are used for 64bit MSR writes. The added
cast in hw_ibrs_recalculate() is redundand but I prefer to add it for
clarity.
Reported by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is coded according to the Intel document 336996-001, reading of the
patches posted on lkml, and some additional consultations with Intel.
For existing processors, you need a microcode update which adds IBRS
CPU features, and to manually enable it by setting the tunable/sysctl
hw.ibrs_disable to 0. Current status can be checked in sysctl
hw.ibrs_active. The mitigation might be inactive if the CPU feature
is not patched in, or if CPU reports that IBRS use is not required, by
IA32_ARCH_CAP_IBRS_ALL bit.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14029
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.
I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.
Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address. Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.
On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.
I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc (some aspects)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D13985
When PTI is enabled, empty IDT slots point to rsvd_pti.
Reported by: Dexuan-BSD Cui <dexuan.bsd@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Kernel Page Table Isolation (KPTI) was introduced in r328083 as a
mitigation for the 'Meltdown' vulnerability. AMD CPUs are not affected,
per https://www.amd.com/en/corporate/speculative-execution:
We believe AMD processors are not susceptible due to our use of
privilege level protections within paging architecture and no
mitigation is required.
Thus default KPTI to off for AMD CPUs, and to on for others. This may
be refined later as we obtain more specific information on the sets of
CPUs that are and are not affected.
Submitted by: Mitchell Horne
Reviewed by: cem
Relnotes: Yes
Security: CVE-2017-5754
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13971
The implementation of the Kernel Page Table Isolation (KPTI) for
amd64, first version. It provides a workaround for the 'meltdown'
vulnerability. PTI is turned off by default for now, enable with the
loader tunable vm.pmap.pti=1.
The pmap page table is split into kernel-mode table and user-mode
table. Kernel-mode table is identical to the non-PTI table, while
usermode table is obtained from kernel table by leaving userspace
mappings intact, but only leaving the following parts of the kernel
mapped:
kernel text (but not modules text)
PCPU
GDT/IDT/user LDT/task structures
IST stacks for NMI and doublefault handlers.
Kernel switches to user page table before returning to usermode, and
restores full kernel page table on the entry. Initial kernel-mode
stack for PTI trampoline is allocated in PCPU, it is only 16
qwords. Kernel entry trampoline switches page tables. then the
hardware trap frame is copied to the normal kstack, and execution
continues.
IST stacks are kept mapped and no trampoline is needed for
NMI/doublefault, but of course page table switch is performed.
On return to usermode, the trampoline is used again, iret frame is
copied to the trampoline stack, page tables are switched and iretq is
executed. The case of iretq faulting due to the invalid usermode
context is tricky, since the frame for fault is appended to the
trampoline frame. Besides copying the fault frame and original
(corrupted) frame to kstack, the fault frame must be patched to make
it look as if the fault occured on the kstack, see the comment in
doret_iret detection code in trap().
Currently kernel pages which are mapped during trampoline operation
are identical for all pmaps. They are registered using
pmap_pti_add_kva(). Besides initial registrations done during boot,
LDT and non-common TSS segments are registered if user requested their
use. In principle, they can be installed into kernel page table per
pmap with some work. Similarly, PCPU can be hidden from userspace
mapping using trampoline PCPU page, but again I do not see much
benefits besides complexity.
PDPE pages for the kernel half of the user page tables are
pre-allocated during boot because we need to know pml4 entries which
are copied to the top-level paging structure page, in advance on a new
pmap creation. I enforce this to avoid iterating over the all
existing pmaps if a new PDPE page is needed for PTI kernel mappings.
The iteration is a known problematic operation on i386.
The need to flush hidden kernel translations on the switch to user
mode make global tables (PG_G) meaningless and even harming, so PG_G
use is disabled for PTI case. Our existing use of PCID is
incompatible with PTI and is automatically disabled if PTI is
enabled. PCID can be forced on only for developer's benefit.
MCE is known to be broken, it requires IST stack to operate completely
correctly even for non-PTI case, and absolutely needs dedicated IST
stack because MCE delivery while trampoline did not switched from PTI
stack is fatal. The fix is pending.
Reviewed by: markj (partially)
Tested by: pho (previous version)
Discussed with: jeff, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The static atrtc_set() function was called only from clock_settime(), so
just move its contents entirely into clock_settime() and delete atrtc_set().
Rename the struct bcd_clocktime variables from 'ct' to 'bct'. I had
originally wanted to emphasize how identical the clocktime and bcd_clocktime
structs were, but things evolved to the point where the structs are not at
all identical anymore, so now emphasizing the difference seems better.
related series of operations without doing a lock/unlock for each byte.
Use them when reading and writing the entire set of time registers.
The original rtcin() and writertc() functions which do lock/unlock on each
byte still exist, because they are public and called by outside code.
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
New common routines were added to kern/subr_clock.c for converting between
calendrical time expressed in BCD and struct timespec. The new functions
return EINVAL on error, as expected when the clock hardware does not provide
valid time.
PR: 224813
Differential Revision: https://reviews.freebsd.org/D13731 (no reviewers)
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
