This transitions the VAP in and out of SLEEP state based on:
* whether there's been an active transmission in the last (hardcoded) 500ms;
* whether the TIM from the AP indicates there is data available.
It uses the beacon reception to trigger the active traffic check.
This way there's no further timer running to wake up the CPU
from its own sleep states.
Right now the VAP isn't woken up for multicast traffic - mostly because
the only NIC I plan on doing this for right will auto wakeup and stay
awake for multicast traffic indicated in the TIM. So I don't have
to manually keep the hardware awake.
This doesn't do anything if the NIC doesn't advertise it implements
the new SWSLEEP capability AND if the VAP doesn't have powersave
enabled.
It also doesn't do much with ath(4) as it doesn't currently implement
the SLEEP state.
Tested:
* AR5416, STA mode (with local ath(4) changes)
This simplifies the code and should avoid the clang sparc
port from generating an abort() call.
Requested by: rdivacky
Submitted by: jhb
MFC after: 2 weeks
Frames transmitted during SLEEP state should be queued in the
power save queue before waking the unit up. Otherwise DHCP
requests and such will be dropped if the NIC is asleep - the
NIC will wake up but not transmit the frame.
GEOM support (thereby adding GEOM support to the disk selection
menu of bsdinstall(8)'s `zfsboot' module updated herein).
MFC after: 1 week
X-MFC-with: 264840
different things from this commit:
+ More devices. Devices that were previously ignored are now present.
+ Faster device scanning. "There is no try, only Do" -- f_device_try()
is no longer the basis of device scanning as GEOM provides [nearly]
all devices (doesn't provide network devices).
+ More information available as non-root. Usually you have to be root
to do things like taste filesystems, and that limits the amount of
information available to non-root users; with GEOM, we see all even
running unprivileged as the brunt of information (except for so-
called ``dangerously dedicated'' file systems) is represented by the
`kern.geom.confxml' sysctl(8) MIB.
NB: Only really useful for external scripts that use the API and run as
non-root; where this code is used in bsdconfig(8) and bsdinstall(8)
you are running as root so can detect even ``dangerously dedicated''
file systems that are not present in GEOM; e.g., no PART class for
a DOS filesystem written directly to disk without partition table).
+ No more use of legacy tools such as diskinfo(8) to get disk capacity
or fdisk(8) to see partitions.
MFC after: 1 week
convention for long usage lines in manpages.
- Sort the option string passed to getopts and the case statements for
the option returned by getopts.
- Add a -C option to specify the device to be used for the console
(defaults to 'stdio') (This could be let vmrun be run in the background
by using /dev/nmdm0B or the like)
- Add a -H option to specify a host path to pass to bhyveload(8) via
-h to back the host0: filesystem in bhyveload(8) (useful for loading
kernels from the host into the guest without having to copy them into
the guest's disk image first)
Reviewed by: neel
MFC after: 2 weeks
Debug info: Generate debug info for variadic functions.
Paired commit with LLVM.
rdar://problem/13690847
This merege includes changes to use the Clang 3.4 API (revisions
199686 and 200082) in lib/CodeGen/CGDebugInfo.cpp:
getParamType -> getArgType
getNumParams -> getNumArgs
getReturnType -> getResultType
Sponsored by: DARPA, AFRL
Debug info: Support variadic functions.
Variadic functions have an unspecified parameter tag after the last
argument. In IR this is represented as an unspecified parameter in the
subroutine type.
Paired commit with CFE r202185.
rdar://problem/13690847
This re-applies r202184 + a bugfix in DwarfDebug's argument handling.
This merge includes a change to use the LLVM 3.4 API in
lib/CodeGen/AsmPrinter/DwarfCompileUnit.cpp:
DwarfUnit -> CompileUnit
Sponsored by: DARPA, AFRL
- Introduce a separate usage() function.
- Don't use argv[0]. Directly name the application, as we do elsewhere.
- Don't prepend the application name.
- Don't print two newlines.
- Add a comment about FTDI and ZLPs.
- Correctly check odditiy of baud rate divisor.
- Correct IOCTL handling for "error" and "event" char.
MFC after: 1 weeks
concurrent updates from any completing transmits in other threads.
This was exposed when doing power save work - net80211 is constantly
doing reassociations and it's causing the rate control state to get
blanked out. This could cause the rate control code to assert.
This should be MFCed to stable/10 as it's a stability fix.
Tested:
* AR5416, STA
MFC after: 7 days
XDEV_FLAGS variable in ${KERNCONF}.conf file.
MFC after: 3 days
X-MFC-Note: fix stable/10 XDEV_FLAGS local for branch
Sponsored by: The FreeBSD Foundation
For stable/10, r264703 sets the correct WITH/WITHOUT
knobs to get xdev built with the arm-freebsd-gcc binary
installed. Unfortunately, the same fix does not work on
head/.
Also, quite to my amazement, WITH_GCC=1 and WITH_GNUCXX=1
causes xdev to fail spectactularly at least on r264791.
The situation as it stands is:
- gcc(1) is needed for the u-boot build.
- cc(1) *cannot* be clang(1)
To shoe-horn the toolchain to make 'xdev' give what is
needed, remove WITH_GNUCXX=1 and add WITH_GCC_BOOTSTRAP=1.
MFC After: 1 week
X-MFC-To: stable/10 only
X-MFC-Note: after stable/10 is broken in this way...
Sponsored by: The FreeBSD Foundation
If a kerberos .hx source file is newer than the .h copy, but the content
is the same, then during buildworld the "cmp -s || cp" command in the
.hx.h rule would do nothing, leaving the .h copy with the older
timestamp. During installworld the rule would again be invoked, causing
a failure as neither cmp or cp would exist in the temporary path.
As the underlying issue should be resolved by r262209, unconditionally
copy the file.
No objection: peter@
Tested by: gjb@
Sponsored by: The FreeBSD Foundation
The MAC filter set may be called without softc_lock held in the case of
SIOCADDMULTI and SIOCDELMULTI ioctls. The ioctl handler checks IFF_DRV_RUNNING
flag which implies port started, but it is not guaranteed to remain.
softc_lock shared lock can't be held in the case of these ioctls processing,
since it results in failure where kernel complains that non-sleepable
lock is held in sleeping thread.
Both problems are repeatable on LAG with LACP proto bring up.
Submitted by: Andrew Rybchenko <Andrew.Rybchenko at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Make sure not to start I/O bigger than MAXPHYS bytes.
Quoting r264504:
When we detect the condition, we'll reduce the block count and perform
a "short" read. In g_uncompress_done() we need to consider the original
I/O length and stop early if we're about to deflate a block that we didn't
read. By using bio_completed in the cloned BIO and not bio_length to
check for this, we automatically and gracefully handle short reads that
our providers may be doing on top of the short reads we may initiate
ourselves.
Reviewed by: marcel
in not showing the most recent event by default.
- When the stop even is hit, break out of the outer loop to stop fetching
more events.
MFC after: 1 week
Add a new %n$ option to change the order of the parameters as
done in the ksh93 builtin printf (among others).
For example:
%printf '%2$1d %1$s\n' one 2 three 4
2 one
4 three
The feature was written by Garret D'Amore under a
BSD license for Nexenta/illumos.
Reference:
http://garrett.damore.org/2010/10/new-implementation-of-printf.html
PR: bin/152934
Obtained from: Illumos
MFC after: 2 weeks
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
