- Use new option SMP_ON_UP instead of (mis)using specific CPU type.
By this, any SMP kernel can be compiled with SMP_ON_UP support.
- Enable runtime detection of CPU multiprocessor extensions only
if SMP_ON_UP option is used. In other cases (pure SMP or UP),
statically compile only required variant.
- Don't leak multiprocessor instructions to UP kernel.
- Correctly handle data cache write back to point of unification.
DCCMVAU is supported on all armv7 cpus.
- For SMP_ON_UP kernels, detect proper TTB flags on runtime.
Differential Revision: https://reviews.freebsd.org/D9133
Commit r312743 ("Use SoC ID - based detection in CESA") resulted
in build failing for Marvell armv5 platforms, which don't support
the newer version of CESA controller. This patch provides a fix by
removing ifdefs around bitfields' definitions, so that they are
known to all platforms.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
* add debugging
* disable the manual noise floor calibration and tracking done by the HAL;
this interferes with the normal calibration path and will lock up the RX
side
* don't program short report / priority if they're provided as NOVAL.
results of commands
As noted in r313008, the underlying issue was that geom_gate device
creation wasn't created at ggatel command completion, but some short
time after. ggatec(8) employs similar logic when creating geom_gate(4)
devices.
Switch from retry loops (after the ggatec/dd write calls) to
wait_for_ggate_device function calls after calling ggatec(8) instead
to detect the presence of the /dev/ggate* device, as this function is
sufficient for determining whether or not the character device is ready
for testing
While here, use atf_check consistently with all dd calls to ensure that
data output is as expected.
MFC after: 1 week
Reviewed by: asomers
Differential Revision: D9409
Sponsored by: Dell EMC Isilon
An incorrect output specifier was used which worked with clang by accident,
but breaks with the in-tree gcc version.
While here plug a whitespace nit.
Reported by: bde
Sync libarchive with vendor
Vendor changes (relevant to FreeBSD):
- support extracting NFSv4 ACLs from Solaris tar archives
- bugfixes and optimizations in the ACL code
- multiple fixes in the test suite
- typo and other small bugfixes
Security fixes:
- cab reader: endless loop when parsing MSZIP signature (OSS-Fuzz 335)
- LHA reader: heap-buffer-overflow in lha_read_file_header_1()
(CVE-2017-5601)
- LZ4 reader: null-pointer dereference in lz4_filter_read_legacy_stream()
(OSS-Fuzz 453)
- mtree reader: heap-buffer-overflow in detect_form() (OSS-Fuzz 421, 443)
- WARC reader: heap-buffer-overflow in xstrpisotime() (OSS-Fuzz 382, 458)
Memory leak fixes:
- ACL support: free memory allocated by acl_get_qualifier()
- disk writer: missing free in create_filesystem_object()
- file reader: fd leak (Coverity 1016755)
- gnutar writer: fix free in archive_write_gnutar_header()
(Coverity 101675)
- iso 9660 reader: missing free in parse_file_info()
(partial Coverity 1016754)
- program reader: missing free in __archive_read_program()
- program writer: missing free in __archive_write_program_free()
- xar reader: missing free in xar_cleanup()
- xar reader: missing frees in expat_xmlattr_setup()
(Coverity 1229979-1229981)
- xar writer: missing free in file_free()
- zip reader: missing free in zip_read_local_file_header()
MFC after: 1 week
X-MFC with: 310866, 310868, 310870, 311899
Vendor changes (relevant to FreeBSD):
- bugfixes, improvemens and optimizations in ACL code
- NFSv4 ACLs can now be extracted from Solaris tar archives
Security fixes:
- cab reader: endless loop when parsing MSZIP signature (OSS-Fuzz 335)
- LHA reader: heap-buffer-overflow in lha_read_file_header_1() (CVE-2017-5601)
- LZ4 reader: null-pointer dereference in lz4_filter_read_legacy_stream()
(OSS-Fuzz 453)
- mtree reader: heap-buffer-overflow in detect_form() (OSS-Fuzz 421, 443)
- WARC reader: heap-buffer-overflow in xstrpisotime() (OSS-Fuzz 382, 458)
Memory leak fixes:
- ACL support: free memory allocated by acl_get_qualifier()
- disk writer: missing free in create_filesystem_object()
- file reader: fd leak (Coverity 1016755)
- gnutar writer: fix free in archive_write_gnutar_header() (Coverity 1016752)
- iso 9660 reader: missing free in parse_file_info() (part. Coverity 1016754)
- program reader: missing free in __archive_read_program()
- program writer: missing free in __archive_write_program_free()
- xar reader: missing free in xar_cleanup()
- xar reader: missing frees in expat_xmlattr_setup() (Coverity 1229979-1229981)
- xar writer: missing free in file_free()
- zip reader: missing free in zip_read_locazip_read_local_file_header()
If one of the scripts listed in (daily|weekly|monthly)_local is executable,
999.local should simply execute it. Only if the script isn't executable
should 999.local assume it needs /bin/sh.
Reviewed by: brian
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Historically AM335x LCDC driver used non-standard "hdmi" property to
refer to HDMI framer. There is no such thing in upstream DTS, so to
handle both cases fallback to bindings described in
bindings/media/video-interfaces.txt in Linux documentation.
We still make some assumptions that are not universally true: we
assume that if remote endpoint is available it's going to be HDMI
framer. Which is true for AM335x-based devices currently supported
but may be not true for some custom hardware.
MFC after: 1 week
Recommit: Stop intercepting some malloc-related functions on FreeBSD
and macOS
Summary:
In https://bugs.freebsd.org/215125 I was notified that some configure
scripts attempt to test for the Linux-specific `mallinfo` and
`mallopt` functions by compiling and linking small programs which
references the functions, and observing whether that results in
errors.
FreeBSD and macOS do not have the `mallinfo` and `mallopt` functions,
so normally these tests would fail, but when sanitizers are enabled,
they incorrectly succeed, because the sanitizers define interceptors
for these functions. This also applies to some other malloc-related
functions, such as `memalign`, `pvalloc` and `cfree`.
Fix this by not intercepting `mallinfo`, `mallopt`, `memalign`,
`pvalloc` and `cfree` for FreeBSD and macOS, in all sanitizers.
Also delete the non-functional `cfree` wrapper for Windows, to fix the
test cases on that platform.
Reviewers: emaste, kcc, rnk
Subscribers: timurrrr, eugenis, hans, joerg, llvm-commits, kubamracek
Differential Revision: https://reviews.llvm.org/D27654
This prevents autoconf scripts from incorrectly detecting that functions
like mallinfo, mallopt, memalign, pvalloc and cfree are supported.
PR: 215125, 215455
MFC after: 1 week
The disk_* and part_* api is using 64bit values for media size and
offsets. However, the current api is using off_t type, which is signed
64-bit int.
In this context the signed media size does not make any sense, and
the offsets are used to mark absolute, not relative locations.
Also, the data from GPT partition table and some other sources is
already using uint64_t data type, so using signed off_t can cause sign
issues.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8710
for EVFILT_READ at the point of the check not when the event is registers.
This fixes a problem with asio when accepting a connection.
Reviewed by: kib@, Scott Mitchell
Since we have dedicated libefi/env.c file for variable support, the following
changes are done:
Simple cstyle changes in env.c
Moved efi variable related commands from loader/main.c to libefi/env.c
Did create function to set "efi-version" environment variable in env.c.
This function does serve two purposes: for first a small clean up of the
loader main(), and for second, it does replace the otherwise unused
efi_variable_support hack.
A bit of cleanup of ficl backend functions. The TEST_MAIN has no meaning,
and removed few memory leaks.
The forth code is updated to use "efi-version" variable, instead of ficl
environment check.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D9165
atomic_fcmpset_*() is analogous to atomic_cmpset(), but saves off the
read value from the target memory location into the 'old' pointer.
Reviewed by: imp, brooks
Requested by: mjg
Differential Revision: https://reviews.freebsd.org/D9391
Freescale added the E.D profile to e500mc and derivative cores. From
Freescale's EREF reference manual this is enabled by a bit in HID0 and should
otherwise default to traditional debug. However, none of the Freescale cores
support that bit, and instead always use E.D. This results in kernel panics
using the standard debug on e500mc+ cores.
Enhanced debug allows debugging of interrupts, including critical interrupts,
as it uses a different save/restore registers (srr*). At this time we don't use
this ability, so instead share the core of the debug handler code between both
handlers.
MFC after: 3 weeks
The rfdi instruction is part of the e500mc and derivative cores. It came into
binutils in a GPLv3 patch, along with the rest of the e500mc instruction set.
Currently only rfdi is planned to be used, so rather than attempt to backport
the full patch, take a surgical route and add instructions as needed.
MFC after: 2 weeks
space available for chunks. This unbreaks the handling of
ICMPV6 packets indicating "packet too big". It just worked
for IPv4 since we are overbooking for IPv4.
MFC after: 1 week
Flags
- IEEE80211_F_ASCAN
- IEEE80211_F_SIBSS
- IEEE80211_F_IBSSON
are not used since r170530 (old WI compatibility ioctls removal)
and r178354 (removed from other places).
IEEE80211_F_TXPOW_FIXED was never utilized; initially added with
IEEE80211_F_TXPOW_AUTO / IEEE80211_F_TXPOW_OFF flags,
which were replaced with IEEE80211_C_TXPMGT capability check in r138568.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9369
- Check for Chelsio vendor ID in probe routines.
- Fail attach instead of faulting if pci_find_dbsf() doesn't find a
device.
PR: 216539
Reported by: asomers
Tested by: Dave Baukus <daveb@spectralogic.com>
MFC after: 3 days
Sponsored by: Chelsio Communications
structure:
if_gethwtsomax(), if_sethwtsomax() - if_hw_tsomax
if_gethwtsomaxsegcount(), if_sethwtsomaxsegcount() - if_hw_tsomaxsegcount
if_gethwtsomaxsegsize(), if_sethwtsomaxsegsize() - if_hw_tsomaxsegsize
Update em and vnic drivers which had already been coverted to use accessor
functions for the other ifnet structure members.
Reviewed by: erj
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8544
of their sys_*() counterparts. The svr4 is left unchanged.
Reviewed by: kib@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9379
The symbols currently hidden in libprofile_rt are needed for linking with
`clang --coverage` to add coverage counters at link time and produce
coverage numbers at runtime.
In collaboration with: dim
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Differential Revision: D9168
The test assumed that `ggatel create` created a device on completion, but that's
incorrect. This squashes the race by waiting for the device to appear, as
`ggatel create` daemonizes before issuing an ioctl to geom_gate(4) if not called
with `-v`.
Discussed with: asomers
MFC after: 1 week
PR: 204616
Sponsored by: Dell EMC Isilon
The desired behavior of atomic_fcmpset_() is to always exit on error. Instead
of retrying on lost reservation, leave the retry to the caller, and return
error.
Reported by: kib
Derived from an implementation by Mark Adler.
The fast loop performs three simultaneous CRCs over subsets of the data
before composing them. This takes advantage of certain properties of
the CRC32 implementation in Intel hardware. (The CRC instruction takes 1
cycle but has 2-3 cycles of latency.)
The CRC32 instruction does not manipulate FPU state.
i386 does not have the crc32q instruction, so avoid it there. Otherwise
the implementation is identical to amd64.
Add basic userland tests to verify correctness on a variety of inputs.
PR: 216467
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: kib@, markj@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9342
* Clang/llvm does not (yet) support -m(no-)spe, so make it gcc-only
* Clang now supports -msoft-float, and does not appear to recognize
"-disable-ppc-float-in-variadic", which appears to have been a crutch until
soft-float was implemented. It's now implemented for both 32- and 64-bit.
* Clang/llvm use a 'medium' code model by default for powerpc64, supporting up
to 4GB TOC, and does not support the '-mminimal-toc' option. Given both of
these, make -mminimal-toc gcc-only.
MFC after: 2 weeks
