so the module could be loaded.
Discussed with: andrew
Reviewed by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6359
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
The A83T thermal sensor controller has three sensors. Sensor 0 corresponds
to CPU cluster 0, sensor 1 to CPU cluster 1, and sensor 2 to the GPU. This
driver exports the temperature sensor readings via sysctl.
Calibration data is obtained from SRAM found in the Secure ID module.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D6378
The RSB controller speaks a simplified two wire protocol at speeds up to
20MHz. It is used on sun8i and sun9i family SoCs to communicate with
power management ICs.
RSB isn't really I2C or SMBus, but the driver exposes an iicbus interface
to simplify power management IC drivers (which may need to support both
RSB and I2C connectivity).
- Introduce new OF API function OF_prop_free to free memory allocated by
OF_getprop_alloc and OF_getencprop_alloc. Current code just calls free(9)
with M_OFWPROP memory class which assumes knowledge about OF_*prop_alloc
functions' internals and leads to unneccessary code coupling
- Convert some of the free(..., M_OFWPROP) instances to OF_prop_free
Files affected by this commit are the ones I was able to test on real
hardware. The rest of free(..., M_OFWPROP) instances will be handled with
idividual maintainers
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D6315
Current API assumes that "gpios" property belongs to the device's node but for
some binding it's not true: gpiokeys has set of child nodes with this property.
Patch adds new argument instead of replacing device_t because device_t will be
used to track ownership for allocated pins
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D6277
This function works with all smp non-multicluster allwinner SoC (A20, A31, A31S and H3).
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D6269
Note that the updated comment is valid only for INTRNG. This should not
be a problem as not INTRNG code is left in place for debugging reasons
only and should not be used anymore. It's anticipated that this old
code will be removed soon.
- Hardcode '8' instead of NBBY in _BITSET_BITS.
- Define a private version of 'howmany' for use in __bitset_words().
- While here, move a few more things out of _bitset.h and _cpuset.h to
bitset.h and cpuset.h, respectively. The only things left in
_bitset.h and _cpuset.h are the bits needed to define a bitset
structure.
Reviewed by: bde, kib (ish)
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are
supported. Note that the A83T contains two clusters of four Cortex-A7
CPUs, and only CPUs in first cluster are started for now.
Tested on a Sinovoip Banana Pi BPI-M3.
The datasheets refer to this controller as EMAC, not to be confused with
the fast ethernet controller (also named EMAC) found in A10/A20 SoCs.
Tested on a BananaPi M3 (A83T), which uses an external RGMII PHY (RTL8211E).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D6169
Add the needed hardcoded gem5 attachments for the UART there, re-using all
the other bits.
In collaboration with: andrew
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6204
In case we do not have an interrupt assignment for the virtual timer,
force the physical timer.
Also skip resource allocation for any timer we do not have an interrupt
assignment for.
In collaboration with: andrew
Submitted by: br ([1] from his gem5 arm64 work)
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6203
In case of updating it with a very low value it might expire again
after writing the tval but before updating ctrl. In that case we do
lose the status bit saying that the timer expired and we will consequently
not get an interrupt for it, leaving the timer in a "dead" state.
In order to solve this increase the minimum period with what the timer
can be loaded to something higher.
Found & analysed with: gem5
Debugged with: andrew
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6202
implementations. Early in the boot the kernel will use an approximate,
however after the timer has been probed it will switch to a more accurate
implementation.
Reviewed by: manu
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5762
Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Set MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA based on the "bus-width"
DT property and reduce maximum bus frequency from 52MHz to 50MHz to match
the capabilities of the clock provider.
Tested on a BananaPi BPI-M3 (A83T).
