The .init and .fini epilogues from crtn should be placed immediately
after any instructions in .init and .fini sections from the linked
objects. Using 16-byte alignment for the epilogues on MIPS was a bug,
but it did not cause any issue with GNU ld as GNU ld (2.17.50) fills the
padding with NOPs.
Current versions of LLD fill any padding between different object files
with trap instructions. Inserting trap padding prior to the .init/.fini
epilogue is undesriable as the resulting binary will crash at runtime.
The .init and .fini sections in object files linked between crti and
crtn must already be a multiple of the instruction size and so no
alignment directive is required in crtn. Indeed, other architectures
(except sparc64) do not specify alignment in their crtn implementations.
Reported by: arichardson
Reviewed by: andrew
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D18291
Also use LED mode settings from the FDT to set the PHY.
From v3 of the patch submitted in the PR.
I moved the sc_led_modes and sc_led_modes_mask default setting outside
of the #ifdef FDT case.
PR: 237325
Submitted by: Ralf <iz-rpi03@hs-karlsruhe.de>
Reviewed by: ian
MFC after: 2 weeks
MFC with: r348001
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20325
Also apply some style(9) and remove the message about EEPROM configuration
(if there's an EEPROM the hardware handles LED configuration itself).
PR: 237325
Reviewed by: ian
MFC after: 2 weeks
Submitted by: Ralf <iz-rpi03@hs-karlsruhe.de>
The existing SPI support only worked for directly attached flash chips.
it didn't implement clock programming or chipselect. It also supports
transfers with unbalanced tx/rx command sizes.
Submitted by: <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D20101
Python 3 no longer doesn't support encoding/decoding hexadecimal numbers using
the `str.format` method. The backwards compatible new method (using the
binascii module/methods) is a comparable means of converting to/from
hexadecimal format.
In short, the functional change is the following:
* `foo.decode('hex')` -> `binascii.unhexlify(foo)`
* `foo.encode('hex')` -> `binascii.hexlify(foo)`
While here, move the dpkt import in `cryptodev.py` down per PEP8, so it comes
after the standard library provided imports.
PR: 237403
MFC after: 1 week
When using LLVM+clang+lld on PowerPC64, ld.bfd is also needed,
to link 32-bit binaries correctly, as lld support for 32-bit is
still minimal.
This change enables it to be built and installed when lld is used.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20259
Sync libarchive with vendor.
Relevant vendor changes:
Issue #795: XAR - do not try to add xattrs without an allocated name
PR #812: non-recursive option for extract and list
PR #958: support reading metadata from compressed files
PR #999: add --exclude-vcs option to bsdtar
Issue #1062: treat empty archives with a GNU volume header as valid
PR #1074: Handle ZIP files with trailing 0s in the extra fields
(Android APK archives)
PR #1109: Ignore padding in Zip extra field data (Android APK archives)
PR #1167: fix problems related to unreadable directories
Issue #1168: fix handling of strtol() and strtoul()
PR #1172: RAR5 - fix invalid window buffer read in E8E9 filter
PR #1174: ZIP reader - fix of MSZIP signature parsing
PR #1175: gzip filter - fix reading files larger than 4GB from memory
PR #1177: gzip filter - fix memory leak with repeated header reads
PR #1180: ZIP reader - add support for Info-ZIP Unicode Path Extra Field
PR #1181: RAR5 - fix merge_block() recursion
(OSS-Fuzz 12999, 13029, 13144, 13478, 13490)
PR #1183: fix memory leak when decompressing ZIP files with LZMA
PR #1184: fix RAR5 OSS-Fuzz issues 12466, 14490, 14491, 12817
OSS-Fuzz 12466: RAR5 - fix buffer overflow when parsing huffman tables
OSS-Fuzz 14490, 14491: RAR5 - fix bad shift-left operations
OSS-Fuzz 12817: RAR5 - handle a case with truncated huffman tables
PR #1186: RAR5 - fix invalid type used for dictionary size mask
(OSS-Fuzz 14537)
PR #1187: RAR5 - fix integer overflow (OSS-Fuzz 14555)
PR #1190: RAR5 - RAR5 don't try to unpack entries marked as directories
(OSS-Fuzz 14574)
PR #1196: RAR5 - fix a potential SIGSEGV on 32-bit builds
OSS-Fuzz 2582: RAR - fix use after free if there is an invalid entry
OSS-Fuzz 14331: RAR5 - fix maximum owner name length
OSS-Fuzz 13965: RAR5 - use unsigned int for volume number + range check
Additional RAR5 reader changes:
- support symlinks, hardlinks, file owner, file group, versioned files
- change ARCHIVE_FORMAT_RAR_V5 to 0x100000
- set correct mode for readonly directories
- support readonly, hidden and system Windows file attributes
MFC after: 2 weeks
Relevant vendor changes:
Issue #795: XAR - do not try to add xattrs without an allocated name
PR #812: non-recursive option for extract and list
PR #958: support reading metadata from compressed files
PR #999: add --exclude-vcs option to bsdtar
Issue #1062: treat empty archives with a GNU volume header as valid
PR #1074: Handle ZIP files with trailing 0s in the extra fields
(Android APK archives)
PR #1109: Ignore padding in Zip extra field data (Android APK archives)
PR #1167: fix problems related to unreadable directories
Issue #1168: fix handling of strtol() and strtoul()
PR #1172: RAR5 - fix invalid window buffer read in E8E9 filter
PR #1174: ZIP reader - fix of MSZIP signature parsing
PR #1175: gzip filter - fix reading files larger than 4GB from memory
PR #1177: gzip filter - fix memory leak with repeated header reads
PR #1180: ZIP reader - add support for Info-ZIP Unicode Path Extra Field
PR #1181: RAR5 - fix merge_block() recursion
(OSS-Fuzz 12999, 13029, 13144, 13478, 13490)
PR #1183: fix memory leak when decompressing ZIP files with LZMA
PR #1184: fix RAR5 OSS-Fuzz issues 12466, 14490, 14491, 12817
OSS-Fuzz 12466: RAR5 - fix buffer overflow when parsing huffman tables
OSS-Fuzz 14490, 14491: RAR5 - fix bad shift-left operations
OSS-Fuzz 12817: RAR5 - handle a case with truncated huffman tables
PR #1186: RAR5 - fix invalid type used for dictionary size mask
(OSS-Fuzz 14537)
PR #1187: RAR5 - fix integer overflow (OSS-Fuzz 14555)
PR #1190: RAR5 - RAR5 don't try to unpack entries marked as directories
(OSS-Fuzz 14574)
PR #1196: RAR5 - fix a potential SIGSEGV on 32-bit builds
OSS-Fuzz 2582: RAR - fix use after free if there is an invalid entry
OSS-Fuzz 14331: RAR5 - fix maximum owner name length
OSS-Fuzz 13965: RAR5 - use unsigned int for volume number + range check
Additional RAR5 reader changes:
- support symlinks, hardlinks, file owner, file group, versioned files
- change ARCHIVE_FORMAT_RAR_V5 to 0x100000
- set correct mode for readonly directories
- support readonly, hidden and system Windows file attributes
NOTE: a version bump of libarchive will happen in the following days
Summary:
loader has grown to the point it's overflowing the existing 307200 bytes
allocated to it in the HFS boot partition on the isos.
Bump the space reservation up to 500k.
Submitted by: Brandon Bergren
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20301
Summary:
PowerPC kernels are fully position independent, just like kernel modules.
The same fixups that are done for modules therefore need to be done to the
kernel, else symbol resolution in, e.g., DTrace, cannot resolve the kernel
symbols, so only addresses in the kernel are printed, while kernel module
symbols are printed.
Test Plan:
Run lockstat on powerpc64. Note symbols are resolved for kernel and
modules.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D20316
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
Currently such routes are added with a link-level IFA, which is
plain wrong. Only after the insertion they get fixed by the special
link_rtrequest() ifa handler. This behaviour complicates routing code
and makes ifa selection more complex.
Streamline this process by explicitly moving link_rtrequest() logic
to the pre-insertion rt_getifa_fib() ifa selector. Avoid calling all
this logic in the loopback route case by explicitly specifying
proper rt_ifa inside the ifa_maintain_loopback_route().§
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20076
During boot we only want to measure things which *must*
be verified - this should provide more deterministic ordering.
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D20297
does not ship a -lomp symlink. Also update OptionalObsoleteFiles for
this, and add 32-bit variants while here.
Submitted by: jbeich
PR: 237975
MFC after: 3 days
FDT data is sometimes used to configure usb devices which are hardwired into
an embedded system. Because the devices are instantiated by the usb
enumeration process rather than by ofwbus iterating through the fdt data, it
is somewhat difficult for a usb driver to locate fdt data that belongs to
it. In the past, various ad-hoc methods have been used, which can lead to
errors such applying configuration that should apply only to a hardwired
device onto a similar device attached by the user at runtime. For example,
if the user adds an ethernet device that uses the same driver as the builtin
ethernet, both devices might end up with the same MAC address.
These changes add a new usb_fdt_get_node() helper function that a driver can
use to locate FDT data that belongs to a single unique instance of the
device. This function locates the proper FDT data using the mechanism
detailed in the standard "usb-device.txt" binding document [1].
There is also a new usb_fdt_get_mac_addr() function, used to retrieve the
mac address for a given device instance from the fdt data. It uses
usb_fdt_get_node() to locate the right node in the FDT data, and attempts to
obtain the mac-address or local-mac-address property (in that order, the
same as linux does it).
The existing if_smsc driver is modified to use the new functions, both as an
example and for testing the new functions. Rpi and rpi2 boards use this
driver and provide the mac address via the fdt data.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/usb/usb-device.txt
Differential Revision: https://reviews.freebsd.org/D20262
The source file was moved to base earlier and also improved upon,
but never compiled in. This patch will:
- Make a module in sys/modules
- Make lindebugfs depend on linuxkpi (for seq_file)
- Check if read/write functions are set before calling, DRM drivers
don't always set both of them.
Reviewed by: hps
Approved by: imp (mentor), hps
MFC after: 1 week
socket is non-blocking and connect() is not finished yet.
Initial patch developed by Steven Hartland in 2008 and adopted by me.
PR: 129169
Reported by: smh@
MFC after: 2 weeks
Submitted by: Patrick Mooney <pmooney@pfmooney.com>
Reviewed by: kib
Tested by: Patrick on SmartOS with Linux and Windows guests
Obtained from: Joyent
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20296
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).
Reviewed by: bz, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20311
Under certain tight race conditions, we found that the lack of a memory
barrier in bhyve's virtio handling causes it to miss a NO_NOTIFY state
transition on block devices, resulting in guest stall. The investigation
is recorded in OS-7613. As part of the examination into bhyve's use of
barriers, one other section was found to be problematic, but only on
non-x86 ISAs with less strict memory ordering. That was addressed in
this patch as well, although it was not at all a problem on x86.
PR: 231117
Submitted by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: jhb, kib, rgrimes
Approved by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19501
Apparently, there is more code trying to call pmap_remove() early,
mostly to free preloaded memory. Instead of moving all deallocations
to the point where a scheduler is initialized, add missed setup of
thread0 di init at hammer_time().
The code in pmap_delayed_invl_start_u() is modified to not ever take
the thread lock if the thread priority is less or equal to PVM. Since
thread0 starts at priority 0, and then is reset to PVM at
proc0_init(), this eliminates taking the thread lock during early
boot.
While there, fix off by one in comparision of the base priority.
Reported and tested by: bcran (previous version)
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 29 days
zfsonlinux/zfs@88cfff1824
zfs_main: fix `zfs userspace` squashing unresolved entries
The `zfs userspace` squashes all entries with unresolved numeric
values into a single output entry due to the comparsion always
made by the string name which is empty in case of unresolved IDs.
Fix this by falling to a numerical comparison when either one
of string values is not found. This then compares any numerical
values after all with a name resolved.
Signed-off-by: Pavel Boldin <boldin.pavel@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported by: clusteradm
Obtained from: ZFS-on-Linux
MFC after: 3 days
It was found during building llvm that the page pv lock pool was seeing very
high contention. Since the pmap is already NUMA aware, it was surmised that
the domains were referencing similar pages in the different domains. This
reduces contention to the point of noise in a lockstat(8) run (~51% down to
under 5%), reducing build times by up to 20%.
This doesn't do a perfect domain alignment, just a best-guess based on
hardware available, that the domain is roughly specified in the upper bits
of the PA. Trying to be more clever would more than likely result in
reduced performance just on the work needed.
MFC after: 2 weeks
memguard(9) wants to avoid reuse of freed addresses for as long as
possible. Previously it maintained a racily updated cursor which was
passed to vmem_xalloc(9) as the minimum address. However, vmem will
not in general return the lowest free address in the arena, so this
trick only really works until the cursor has wrapped around the first
time.
Reported by: alc
Reviewed by: alc
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17227
This is described in the vmem paper: "directs vmem to use the next free
segment after the one previously allocated." The implementation adds a
new boundary tag type, M_CURSOR, which is linked into the segment list
and precedes the segment following the previous M_NEXTFIT allocation.
The cursor is used to locate the next free segment satisfying the
allocation constraints.
This implementation isn't O(1) since busy tags aren't coalesced, and we
may potentially scan the entire segment list during an M_NEXTFIT
allocation.
Reviewed by: alc
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17226
This change doesn't make any attempt to add support for these slices to the
relevent GEOM classes. Just register the number in fdisk and the canonical
list of kernel macros (diskmbr.h).
Obtained from: DragonFlyBSD (794d80aa519b394b3174f20776a) (small subset of)
Fix stack unwinding such that requesting N stack frames in lockstat will
actually give you N frames, not anywhere from 0-3 as had been before.
lockstat prints the mutex function instead of the caller as the reported
locker, but the stack frame is detailed enough to find the real caller.
MFC after: 2 weeks
We need to make the find_veriexec_file() function available publicly, so
rename it to mac_veriexec_metadata_find_file_info() and make it non-static.
Bump the version of the veriexec device interface so user space will know
the labelized version of fingerprint loading is available.
Approved by: sjg
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D20295
