commit 6b569451b92c48ccf1768da32e7e89189e1aa253
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Mon Jan 27 22:50:46 2014 +0000
Always install nmtree as mtree.
For compability, link mtree to nmtree.
X-MFC after: never
Sponsored by: DARPA, AFRL
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
MFC after: 4 weeks
Sponsored by: DARPA, AFRL
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
/dev/kmem and related devices (i.e. grants PRIV_IO and PRIV_KMEM_WRITE).
This in conjunction with changing the drm driver's permission check from
PRIV_DRIVER to PRIV_KMEM_WRITE will allow a jailed Xorg server.
Submitted by: netchild
MFC after: 1 week
which cause EINVAL returned from nanosleep() which cause loop in
cron_sleep() and making all cron jobs to start about 30 seconds earlier
(which cause f.e. logfiles rotation by newsyslog delayed by 1 hour).
Use simple and proved calculations from kernel's timespecsub() instead.
MFC after: 3 days
- Store the length of each read-only VPD value since not all values are
guaranteed to be ASCII values (though most are).
- Add a new pciio ioctl to fetch VPD for a single PCI device. The values
are returned as a list of variable length records, one for the device
name and each keyword.
- Add a new -V flag to pciconf's list mode which displays VPD data for
each device.
MFC after: 1 week
device name instead of just the selector.
- Accept an optional device argument to -l to restrict the output to only
listing details about a single device. This is mostly useful in
conjunction with other flags like -e or -c to allow a user to query
details about a single device.
MFC after: 1 week
in the one-line comment associated with the dumpdev setting was not present
for the case where the user deselects the dumpdev service (restoring pre-
r256348 behaviour.
MFC After: 3 days
if it was above 4GB. This was seen with CentOS 6.5 guests with
large RAM, since the block drivers are loaded late in the
boot sequence and end up allocating descriptor memory from
high addresses.
Reported by: Michael Dexter
MFC after: 3 days
only allows basic username/password config, and does not provide the
ability to set any of the other WPA options. Regardless, this is
generally sufficient to associate.
Perhaps in the future this could allow full configuring (e.g. being able
to set "anonymous identity", and perhaps some of the more obscure WPA
options), though perhaps that will better belong in bsdconfig when that
grows wlan config ability.
MFC after: 1 week
LPC devices. Among other things, the LPC serial ports now appear as
ACPI devices.
- Move the info for the top-level PCI bus into the PCI emulation code and
add ResourceProducer entries for the memory ranges decoded by the bus
for memory BARs.
- Add a framework to allow each PCI emulation driver to optionally write
an entry into the DSDT under the \_SB_.PCI0 namespace. The LPC driver
uses this to write a node for the LPC bus (\_SB_.PCI0.ISA).
- Add a linker set to allow any LPC devices to write entries into the
DSDT below the LPC node.
- Move the existing DSDT block for the RTC to the RTC driver.
- Add DSDT nodes for the AT PIC, the 8254 ISA timer, and the LPC UART
devices.
- Add a "SuperIO" device under the LPC node to claim "system resources"
aling with a linker set to allow various drivers to add IO or memory
ranges that should be claimed as a system resource.
- Add system resource entries for the extended RTC IO range, the registers
used for ACPI power management, the ELCR, PCI interrupt routing register,
and post data register.
- Add various helper routines for generating DSDT entries.
Reviewed by: neel (earlier version)
hides the setjmp/longjmp semantics of VM enter/exit. vmx_enter_guest() is used
to enter guest context and vmx_exit_guest() is used to transition back into
host context.
Fix a longstanding race where a vcpu interrupt notification might be ignored
if it happens after vmx_inject_interrupts() but before host interrupts are
disabled in vmx_resume/vmx_launch. We now called vmx_inject_interrupts() with
host interrupts disabled to prevent this.
Suggested by: grehan@
i. e. the POSIX:5.6.1 st_ino field, which can be used to detect hard links
in the file system. This is also the default in mkisofs(8) and according to
its man page, no system only being able to cope with Rock Ridge version 1.10
is known to exist.
PR: 185138
Submitted by: Kurt Lidl
MFC after: 1 week
to SIGTERM when ACPI is enabled. Sending SIGTERM to the hypervisor when an
ACPI-aware OS is running will now trigger a soft-off allowing for a graceful
shutdown of the guest.
- Move constants for ACPI-related registers to acpi.h.
- Implement an SMI_CMD register with commands to enable and disable ACPI.
Currently the only change when ACPI is enabled is to enable the virtual
power button via SIGTERM.
- Implement a fixed-feature power button when ACPI is enabled by asserting
PWRBTN_STS in PM1_EVT when SIGTERM is received.
- Add support for EVFILT_SIGNAL events to mevent.
- Implement support for the ACPI system command interrupt (SCI) and assert
it when needed based on the values in PM1_EVT. Mark the SCI as active-low
and level triggered in the MADT and MP Table.
- Mark PCI interrupts in the MP Table as active-low in addition to level
triggered.
Reviewed by: neel
- Implement the PM1_EVT and PM1_CTL registers required by ACPI.
The PM1_EVT register is mostly a dummy as bhyve doesn't support any
of the hardware-initiated events. The only bit of PM1_CNT that is
implemented are the sleep request bits (SPL_EN and SLP_TYP) which
request a graceful power off for S5. In particular, for S5, bhyve
exits with a non-zero value which terminates the loop in vmrun.sh.
- Emulate the Reset Control register at I/O port 0xcf9 and advertise
it as the reset register via ACPI.
- Advertise an _S5 package.
- Extend the in/out interface to allow an in/out handler to request
that the hypervisor trigger a reset or power-off.
- While here, note that all vCPUs in a guest support C1 ("hlt").
Reviewed by: neel (earlier version)
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
Reviewed by: neel (earlier version)
state before the requested state transition. This guarantees that there is
exactly one ioctl() operating on a vcpu at any point in time and prevents
unintended state transitions.
More details available here:
http://lists.freebsd.org/pipermail/freebsd-virtualization/2013-December/001825.html
Reviewed by: grehan
Reported by: Markiyan Kushnir (markiyan.kushnir at gmail.com)
MFC after: 3 days
location of /etc/rc.local on the install media is more appropriate as it
knows serial vs. non-serial and can also do the change earlier (so that
even the initial Install dialog can benefit from the change).
MFC after: 3 days
installation to 3-4+ (depending on vdev type) vdevs would result in odd
error messages where the zpool `create' command appeared to repeat itself
(an artifact of printf when you supply too many arguments -- caused by
neglecting to properly quote the multi-word expansion of $*vdevs when
creating the pool(s)). Example error below (taken from bsdinstall_log):
DEBUG: zfs_create_boot: Creating root pool...
DEBUG: zfs_create_boot: zpool create -o altroot=/mnt -m none -f "zroot" \
ada0p3.nop ada1p3.nopzpool create ada2p3.nop "ada3p3.nop"
DEBUG: zfs_create_boot: retval=1 <output below>
cannot open 'ada1p3.nopzpool': no such GEOM provider
DEBUG: Running installation step: hostname
rm: /tmp/bsdinstall_etc/fstab: No such file or directory
The two lines are unrelated, and the rm is spurious. Let's add `-f' to
that rm(1) so it doesn't confuse us when debugging an install.
MFC after: 3 days
should not have used DIALOG_CANCEL because dialog.subr wasn't included to
define it. The effect of the error was that you could not cancel the
partition dialog. Discovered by checking bsdinstall_log for something else.
MFC after: 3 days
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
required in such a case). But don't prevent the user from pointing the
gun at his/her foot -- you can disable 4k alignment after enabling geli).
MFC after: 3 days
and subsequent headaches caused by multiple pools with the same name.
Specifically, blast away any labels on the designated swap partition.
Problem was when you install to a given layout *with* swap and then turn
around and re-install the same layout *without* swap (we weren't doing a
labelclear for the swap device, so would end up with an "UNAVAIL" status
zroot pool that may only exist in the pool cache).
MFC after: 3 days
+ For GPT, always provision zfs# partition after swap [for resizability]
+ For MBR, always use a boot pool to relialy place root vdevs at EOD
NB: Fixes edge-cases where MBR combination failed boot (e.g. swap-less)
+ Generalize boot pool logic so it can be used for any scheme (namely MBR)
+ Update existing comments and some whitespace fixes
+ Change some variable names to make reading/debugging the code easier
in zfs_create_boot() (namely prepend zroot_ or bootpool_ to property)
+ Because zroot vdevs are at EOD, no longer need to calculate partsize
(vdev consumes remaining space after allocating swap)
+ Optimize processing of disks -- no reason to loop over the disks 3-4
separate times when we can logically use a single loop to do everything
Discussed on: -stable
MFC after: 3 days
+ De-obfuscate debugging to show actual values
+ Change graid(8) syntax; s/destroy/delete/ [destroy is not invalid syntax]
+ Log commands that were previously quiet
+ Added some new comemnts and updated some existing ones
+ Add missing local for `disk' used in zfs_create_boot()
+ Use $disks instead of multiply-expanding $* in zfs_create_boot()
+ Pedantically unset variable holding geli(8) passphrase after use
+ Pedantically add double-quotes around zpool names and zfs datasets
+ Fix quotation expansion for zpool_cache entries of loader.conf(5)
+ Some limited whitespace changes
MFC after: 3 days
https://communities.vmware.com/thread/107230https://communities.vmware.com/docs/DOC-11677
Basically, ignore the ``function 62'' and ``function 63'' interpretations
of the left/right command key when we're in the lengthiest portion of the
installation (initiated by the `auto' module).
The net effect is that you can now (once you've started the installer from
the media) escape the VM without prematurely terminating the current action
due to spurious escape sequence.
MFC after: 3 days
installation is cdrom. This enables bsdconfig(8) to make use
of the on-disc pkg(8) repository configuration, which fixes
package selection and installation from the dvd installer.
MFC after: 3 days
M-MFC-With: r259426
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
===
DEBUG: Running installation step: services
local: Not in a function
/usr/libexec/bsdinstall/services: cannot create : Read-only file system
/usr/libexec/bsdinstall/services: /tmp/bsdinstall/etc/rc.conf.services: \
Permission denied
===
The `local: Not in a function' is obvious, and was introduced by myself in
SVN revision 256348.
The latter two are caused by the attempt to use "\" to continue the line
after using the ">>" redirect. This appears to attempt to write a file with
the name " " in the current directory and subsequently attempts to execute
the file that was originally intended for writing (which is not executable;
hence the `Permission denied'). That was introduced in SVN r228192 about
2 years ago, apparently unnoticed until I started going over the debug
outputs very carefully.
MFC after: 3 days
This will read the REPOS_DIR env/config setting (default is /etc/pkg
and /usr/local/etc/pkg/repos) and use the last enabled repository.
This can be changed in the environment using a comma-separated list,
or in /usr/local/etc/pkg.conf with JSON array syntax of:
REPOS_DIR: ["/etc/pkg", "/usr/local/etc/pkg/repos"]
Approved by: bapt
MFC after: 1 week
would either exit on assertion, or, if assertions are not enabled,
fail to authenticate the target.
MFC after: 2 days
Sponsored by: The FreeBSD Foundation
The An macros is used for authors while the Ar macro is used for arguments.
AFAIK mcast-addr and ifname are not authors.
PR: docs/184649
Submitted by: cnst++
MFC After: 3 days
after attempting to install to encrypted ZFS root (caused by a typo in a
variable name -- ZFSBOOT_BOOT_FSNAME -> ZFSBOOT_BOOTFS_NAME).
MFC after: 3 days
vcpu and destroy its thread context. Also modify the 'HLT' processing to ignore
pending interrupts in the IRR if interrupts have been disabled by the guest.
The interrupt cannot be injected into the guest in any case so resuming it
is futile.
With this change "halt" from a Linux guest works correctly.
Reviewed by: grehan@
Tested by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
+ Remove UNAME_P=$(...) from startup/misc -- already supplied by common.subr
+ Use f_getvar instead of $(eval echo \$$var) -- f_getvar is sub-shell free
+ Add `-e' and `-k var' options to f_eval_catch -- increasing use-cases
+ Use f_eval_catch to display errors on failure -- reducing duplicated code
+ Use f_eval_catch when we need output from a command -- improving debugging
+ Optimize f_isinter of strings.subr for performance -- now sub-shell free
+ Improve error checking on pidfiles -- using f_eval_catch and f_isinteger
+ Use $var_to_set arg of f_ifconfig_{inet,netmask} -- eliminate sub-shells
+ Use f_sprintf instead of $(printf ...) -- consolidate sub-shells
+ Use $var_to_set arg of f_route_get_default -- eliminate sub-shells
+ Add f_count to replace $(set -- ...;echo $#) -- eliminate sub-shells
+ Add f_count_ifs to replace $(IFS=x;set -- ...;echo $#) -- no sub-shells
+ Replace var="$var${var:+ }..." in loops with var="$var ..." with a follow-
up var="${var# }" to trim leading whitespace -- optimize loops
+ Use $var_to_set arg of f_resolv_conf_nameservers -- eliminate sub-shells
+ Comments for the f_eval_catch function
+ Remove a duplicate `local ... desc ...' in f_device_get_all of device.subr
+ Use $var_to_set arg of f_device_capacity -- eliminate sub-shells
+ Whitespace fixes in f_dialog_init of dialog.subr
+ Optimize f_inet_atoi of media/tcpip.subr for performance -- sub-shell free
+ In several cases, send stderr to /dev/null -- clean up runtime execution
+ Change f_err of common.subr to go to program stderr not terminal stderr,
allowing redirection of output from functions that use f_err
+ Disable debugging when using f_getvar to get variable argument to
f_startup_rcconf_map_expand of startup/rcconf.subr
+ Use f_replace_all instead of $(echo ... | tr | sed) -- performance
+ Add a $var_to_set option to f_index_{file,menusel_{command,keyword}} of
common.subr -- centralize sub-shells
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.
MFC after: 3 days
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.
The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.
The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.
Discussed with: grehan@
would exceed the maximum size. This can be a difficult problem to diagnose
if one is, for instance, using -s with a fixed size in a script and the bsize
calculated for a filesystem image changes, necessitating a re-rounding of the
image size or a hand-setting of the bsize. Previously one would get a
cryptic message about how the size exceeded the maximum size, which normally
only happens if the contents of the image are larger than specified.
bhyveload: introduce the -c <device> parameter
to select a tty for output (or "stdio")
bhyve: allow the puc and lpc-com backends to
accept a tty in addition to "stdio"
When used in conjunction with the null-modem device,
nmdm(4), this allows attach/detach to the guest console
and multiple concurrent serial ports. kgdb on a serial
port is now functional.
Reviewed by: neel
Requested by: Almost everyone that has used bhyve
MFC after: 10.0
Table is 22 bits, with the bit 31 being the interrupt-on-completion
bit.
OpenBSD and UEFI set this bit, resulting in large block i/o lengths
being sent to bhyve and coredumping the process. Fix by masking off
the relevant 22 bits when using the DBC field as a length.
Reviewed by: Zhixiang Yu
Discussed with: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
MFC after: 10.0
actual value read by the guest from the device. The IOAPIC ID is now set to
zero in both MPtable/ACPI tables as well as in the ioapic device emulation.
Pointed out by: grehan@
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
`device.subr' framework (improving performane and reducing sub-shells). Next
improve the `device.subr' framework itself. Make use of the `flags' device
struct member for network interfaces to indicate if an interface is Active,
Wired Ethernet, or 802.11 Wireless. Functions have been added to make checks
against the `flags' bit-field quick and efficient. Last, add function for
rescanning the network to update the device registers. Remove an unnecessary
local (ifn) while we're here (use already provided local `if').
nmtree.
The mtree output used by mergemaster in this case was clearly not meant for
computer consumption and an approach based on -f <file1> -f <file2> would
probalby be a better idea, but this is a minimal change.
MFC after: 3 days
X-MFC-with: r258437
errors on re-entry for physical media). Also, while we're here, stop
ejecting the CDROM when we're done with it (but leave the functions for
later use so that we could perhaps -- from the installer standpoint -- use
it to eject the media after an install).
MFC after: 3 days
fix a bug where "pkg update" was not getting the value of PACKAGESITE.
NB: PACKAGESITE needs to be explicitly exported in support of children.
MFC after: 3 days
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
have zero length. Filesystem corruption will tend to truncate files, and
since these are short that's likely to result in them becoming empty.
Suggested by: Richard Clayton
Convinced by: rwatson
MFC after: 3 weeks
- A call was misplaced at the wrong level of nested if blocks, so that
the buffers for unix domain sockets (/dev/log, /dev/klog) were never
increased at all; they remained at a way-too-small default size of 4096.
- The function that was supposed to double the size of the buffer
sometimes did nothing, and sometimes installed a wildly-wrong buffer
size (either too large or too small) due to an unitialized 'slen'
variable passed to getsockopt(). Most often it doubled the UDP buffers
from 40k to 80k because accidentally there would be harmless stack
garbage in the unitialized variables.
- The whole concept of blindly doubling a socket's buffer size without
knowing what size it started at is a design flaw that has to be called a
bug. If the double_rbuf() function had worked at all (I.E., if the
other two bugs didn't exist) this would lead to UDP sockets having an
80k buffer while unix dgram sockets get an 8k buffer. There's nothing
about the problem being solved that requires larger buffers for UDP than
for unix dgram sockets -- the buffering requirements are the same
regardless of socket type.
This change renames the double_rbuf() function to increase_rbuf() and
increases the buffer size on all types of sockets to 80k. 80k was
chosen only because it appears to be the size the original change was
shooting for, and it certainly seems to be reasonably large (I might
have picked 64k in the absence of any historical guidance).
PR: 160433
Submitted by: me, in 2011.
upcoming in-kernel device emulations like the HPET.
The ioctls VM_IOAPIC_ASSERT_IRQ and VM_IOAPIC_DEASSERT_IRQ are used to
manipulate the ioapic pin state.
Discussed with: grehan@
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
passed to mergemaster. In this mode, only changes to /etc/master.passwd
and /etc/group are merged to /etc. In addition, it uses a temporary
tree to stage these changes rather than overwriting the existing
'current' and 'previous' trees so that a full update can be run after
a normal installworld has completed.
MFC after: 2 weeks
The effects of this patch would only be noticeable if you were purposefully
setting a bad value and trying to see what happens; and leaving the disks
intact if a bad value has been set seems fair.
When bsdinstall(8) sources the bsdconfig(8) common.subr file,
PKG_ABI is set by calling 'pkg -vv' and searching for the ABI
pkg(8) will use.
When pkg(8) is run for the first time, the bootstrap process
is run, which prompts for 'y/N' input from stdin if running with
TERM set.
Since TERM is set and it is the first time pkg(8) is run, which
happens automatically, bsdinstall(8) hangs waiting for user input
which is never displayed since a specific line is expected by
awk(1), and stdin is expected by pkg(8).
Set ASSUME_ALWAYS_YES=1, which will cause pkg(8) to assume the
'-y' flag is also used for the bootstrap process, allowing
bsdinstall(8) to proceed to the keymap lookup, otherwise
bsdinstall(8) appears to hang after selecting 'Install' from the
menu on first boot from CDROM.
pin 2 of the IOAPIC.
Add an 'Interrupt Source Override' entry to the MADT to describe this
and start asserting interrupts on pin 2 in the 8254 device model.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
and INDEX-NEW and compare them, not generate the same list of directories
from INDEX-OLD twice...
Pointy hats to: cperciva & everybody who didn't proofread EN-13:04 enough
+ Add a `-D FILE" command-line option for overriding the path to the
bsdinstall log file (BSDINSTALL_LOG env var).
+ Document new `-D FILE' in the man page for bsdinstall.
+ If FILE in `-D FILE' begins with a +, debug output goes to stdout
(interleaved between dialog(1) invocations/output) as well as to FILE
(minus the leading + of course).
+ If BSDINSTALL_LOG cannot be written, then debugging is disabled (except in
the case of a leading + in the pathname, wherein debug will still be
printed to stdout).
+ Update source code formatting style.
+ Fix a dangling participle ("Begun ..." -> "Began ...")
+ Rewrite the docsinstall script (was necessary to abate direct dependency
on BSDINSTALL_LOG (instead, use fault-tolerant bsdconfig framework which
displays appropriate errors for package management).
NB: docsinstall is still using pkg(8) after this change.
+ Add additional debug output for dhclient/rtsol/wpa_cliscan
+ Display script errors in a textbox rather than just on stdout
+ Update many coments.
+ Add new f_show_err() API call (like f_show_msg but changes the dialog
title to "Error")(see bsdconfig's `common.subr').
+ Add new f_eval_catch() API call for executing a command via eval but not
before logging the command to debug. Several example cases documented in
API header for function in bsdconfig's `common.subr'.
+ Fix dialog auto-sizing when launched as an rvalue to a pipe for indirected
scripts (previously would default to 24x80 sizing in this case, now it can
autosize to full size even when in a pipe chain).
+ Fix bug in f_snprintf if $format argument began with "-"; printf would
misinterpret as a flag. (this is in bsdcofig's `strings.subr').
+ Add accompanying f_sprintf() and f_vsprintf() to go along with already
existing f_snprintf() and f_vsnprintf() (see bsdconfig's `strings.subr').
+ Remove some unnecessary default ZFS datasets from the automatic "zfsboot"
script. Such as: /usr/ports/distfiles /usr/ports/packages /usr/obj /var/db
/var/empty /var/mail and /var/run (these can all be created as-needed once
the system is installed).
+ Remove setuid=off for /usr/home (as discussed from last round of CFT).
+ Fix some i18n string violations in "zfsboot".
+ Bolster debugging output in "zfsboot".
+ Fix some string quoting issues in "zfsboot".
+ Fix some variable scope issues in "zfsboot".
+ Change "Create" to "Install" in "zfsboot" main menu.
+ Increase error checking in "zfsboot" (type-check arguments and such).
+ Add call to "graid destroy" killing automatic metadata (part of the series
of pedantic destructions we do when bootstrapping a new/naked disk).
+ Make judicious use of new f_eval_catch() in "zfsboot".
+ Fixup some variable names for consistency (zfsboot).
+ Fix an underride syntax parameter expansion folly (zfsboot).
+ Confirm layout if not explicitly chosen when blindly proceeding (no
longer have to touch anything on the ZFS menu if it scares you, just
choose the omnibus "Install" option at the top and you'll be prompted to
select vdev type and disks in the layout confirmation dialog).
+ Change numbered menu items to alphabetic for more efficient navigation.
+ Consolidate vdev selection and disk selection into a single stateful
menu which performs validation and allows backing out to each previous
menu as you go deeper.
+ Redesign the ``Last Chance'' dialog (still using the same colors, but
make it conform to a tolerable width and make disks appear in a block-
quote style indented region).
+ Fix a bug wherein we used the a lowercase variable name by accident
(actual variable name declared as all-uppercase) at the time of
initializing fstab(5) (not believed to cause any issues though).
+ Update the geli setup infobox for each provider being initialized
(not just at the onset -- since each ``geli init'' causes kernel messages
to push our infobox off-screen).
Reviewed by: Allan Jude <freebsd@allanjude.com>
Discussed on: -current
MFC after: 3 days
(get command) or if the current value is the same as what is desired
(set command). In those cases, the return status is success.
Otherwise, if the variable is unset (get command) or set to a different
value that what is desired (set command), returns with error status.
This is useful for puppet integration as well as everyday scripting.
Rather, prevent a bunch of debugging information from spewing onto the
screen when using the `describe' flag (misinterpreted as `debug' by
the automatatic initialization routines).
series of commands. Accepts the `-d' flag as a first argument to skip
displaying messages in a dialog box. The command is logged as it
appears to the shell prior to the first pass of parameter expansion to
allow copy/pasting into a real shell (opposed to simply echo'ing the
command which would produce debug output that has undergone at least one
pass of parameter expansion, thus no-longer copacetic for copy/paste).
Takes printf(1) style syntax and a utility identifier for error messages.
whether the debugFile is truncated upon initialization (useful for when
children implicitly re-initialize debugging and you want children to
append to your existing debugFile).
Remove the VM name from some of the thread-naming calls
since it is now in the proc title.
Slightly modify the thread-naming for the net and block
threads.
This improves readability when using top/ps with the -a
and -H options on a system with a large number of bhyve VMs.
Requested by: Michael Dexter
Reviewed by: neel
MFC after: 4 weeks
default from the very beginning. It was placed in wrong namespace
net.link.ether, originally it had been at another wrong namespace. It was
incorrectly documented at incorrect manual page arp(8). Since new-ARP commit,
the tunable have been consulted only on route addition, and ignored on route
deletion. Behaviour of a system with tunable turned off is not fully correct,
and has no advantages comparing to normal behavior.
of pkg(8) even if already installed.
This is useful if you somehow messup pkg(8) and need to reinstall from
remote with it already being registered in the pkg(8) /var/db/pkg database.
Also add some sanity checks to 'pkg add'.
Approved by: bapt
MFC after: 2 days
in order to be consistent with iSCSI terminology. Besides, calling the
option '-h' was just wrong.
This changes usage for newly added iscsictl(8), and two newly added
subcommands to ctladm(8). This breaks POLA between CURRENT and 10,
but since 10.0 has not been released yet, it's still ok to do.
MFC after: 3 days
Discussed with: re (glebius)
Sponsored by: FreeBSD Foundation
forwarding any command to it after installation.
This is useful if the only goal is to install pkg(8) without any extra
output.
Requested by: cperciva
Approved by: bapt
MFC after: 2 days
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.
Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.
There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.
The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.
The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".
The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"
The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.
Discussed with: grehan
Reviewed by: grehan
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
M share/examples/bhyve/vmrun.sh
AM usr.sbin/bhyve/legacy_irq.c
AM usr.sbin/bhyve/legacy_irq.h
M usr.sbin/bhyve/Makefile
AM usr.sbin/bhyve/uart_emul.c
M usr.sbin/bhyve/bhyverun.c
AM usr.sbin/bhyve/uart_emul.h
M usr.sbin/bhyve/pci_uart.c
M usr.sbin/bhyve/pci_emul.c
M usr.sbin/bhyve/inout.c
M usr.sbin/bhyve/pci_emul.h
M usr.sbin/bhyve/inout.h
AM usr.sbin/bhyve/pci_lpc.c
AM usr.sbin/bhyve/pci_lpc.h
BIO_new_mem_buf takes a void* buf, but internally it never modifies the
buf. It assigns the buffer to another pointer and then marks it as
read-only. So deconsting it should be safe here.
Also fix warning about 'buf' possibly being unused in parse_cert()
Approved by: bapt
MFC after: 2 days
X-MFC-With: r257147
added with "pkg add". If the pkg.conf is configured to check for
signature, then the pkg.txz.sig file will be expected and validated
per r257147
Approved by: bapt
MFC after: 2 days
If the pkg.conf is configured with SIGNATURE_TYPE: FINGERPRINTS,
and FINGERPRINTS: /etc/keys/pkg then a pkg.sig file is fetched along
with pkg.txz. The signature contains the signature provided by the
signing server, and the public key. The .sig is the exact output
from the signing server in the following format:
SIGNATURE
<openssl signed>
CERT
<rsa public key>
END
The signature is verified with the following logic:
- If the .sig file is missing, it fails.
- If the .sig doesn't validate, it fails.
- If the public key in the .sig is not in the known trusted fingerprints,
it fails.
- If the public key is in the revoked key list, it fails.
Approved by: bapt
MFC after: 2 days
Discussed by: bapt with des, jonathan, gavin
For now only /etc/pkg/FreeBSD.conf is supported. Its style is:
Repo: {
URL: "...",
MIRROR_TYPE: "...",
...
}
The configuration will be read from /usr/local/etc/pkg.conf if exists,
otherwise /etc/pkg/FreeBSD.conf
Approved by: bapt
MFC after: 2 days
where a pin assertion while a source was masked would result in
the interrupt being lost, with the symptom being a console hang.
The condition is now recorded, and the interrupt generated when
the source is unmasked.
Discovered by: OpenBSD 5.4 MP
Reviewed by: neel
MFC after: 3 days
pkg 1.2 is adding this support as well. This should help
lessen the confusion on why the default SRV PACKAGESITE
does not load in a browser.
Adapated from: matthew's upstream pkg change
Approved by: bapt
MFC after: 2 days
at the end of the upgrade process, after warning users to upgrade any
3rd party software (e.g., from the ports tree) which might link to the
libraries being removed.
Prior to this commit, the line
/usr/lib/libc.so|...|/lib/libc.so.7
matched the regex, which -- upgrading from 9.x to 10.x, where libc.so is
a regular file and thus was not part of a line which matched the regex --
resulted in freebsd-update thinking that /usr/lib/libc.so was a shared
library which was being removed as part of the upgrade. This had some
unfortunate consequences.
This will be part of an upcoming Errata Notice.
- Use #defines for capability bits
- Export the VTBLK_F_BLK_SIZE capability
- Fix bug in calculating capacity: it is in
512-byte units, not the underlying sector size
This allows virtio-blk to have backing devices
with non 512-byte sector sizes e.g. /dev/cd0, and
4K-block harddrives.
Reviewed by: neel
MFC after: 3 days
- order srv records by priorities
- for all entries of the same priority, order randomly respect the weight
- select the port where to fetch from respect the port provided in the SRV record
Obtained from: pkg git repo
MFC after: 3 days
- remove assumption that the backing file/device had
512-byte sectors
- fix incorrect iovec size variable that would result
in a buffer overrun when an o/s issued an i/o request
with more s/g elements than the blockif api
Reviewed by: Zhixiang Yu (zxyu.core@gmail.com)
MFC after: 3 days
the cfi(4) driver. It remained in the tree longer than would be ideal
due to the time required to bring cfi(4) to feature parity.
Sponsored by: DARPA/AFRL
MFC after: 3 days
- Allow a hostbridge to be created with AMD as a vendor.
This passes the OpenBSD check to allow the use of MSI
on a PCI bus.
- Enable the i/o interrupt section of the mptable, and
populate it with unity ISA mappings. This allows the
'legacy' IRQ mappings of the PCI serial port to be
set up. Delete unused print routine that was obscuring code.
- Use the '-W' option to enable virtio single-vector MSI
rather than an environment variable. Update the virtio
net/block drivers to query this flag when setting up
interrupts.: bhyverun.c
- Fix the arithmetic used to derive the century byte in
RTC CMOS, as well as encoding it in BCD.
Reviewed by: neel
MFC after: 3 days
Linux writes to these nominally read-only registers,
so avoid having bhyve write warning messages to stdout
when the reg writes can be safely ignored. Change the
WPRINTF to DPRINTF which is conditional.
Reviewed by: mav
Discussed with: mav, Zhixiang Yu
MFC after: 3 days
from the command line.
The option syntax is "-e <name=value>". It may be used multiple times to set
multiple environment variables.
Reviewed by: grehan
Requested by: alfred
directories last.
This is generally handled by the fact that the list of filesystem objects
is sorted, but this sorting is broken by code which moves .so files ahead
(so that they're present before any binaries which use them)... that code
also moved .so files ahead of directories, which is a problem for upgrading
to 10.0 where there's a new directory containing new .so files.
Errata Notice Candidate.
'invpcid' instruction to the guest. Currently bhyve will try to enable this
capability unconditionally if it is available.
Consolidate code in bhyve to set the capabilities so it is no longer
duplicated in BSP and AP bringup.
Add a sysctl 'vm.pmap.invpcid_works' to display whether the 'invpcid'
instruction is available.
Reviewed by: grehan
MFC after: 3 days
forking lots of processes to run echo|cut. In one test this reduced
the CPU time from 980s to 134s and the wallclock time from 806s to
132s.
Submitted by: Oleg Ginzburg
and OpenSolaris/Illumos beadm use.
Remove /usr/local and /var/db/pkg datasets. Andriy Gapon writes:
I want to note that a good implementation of BEs should support a dependent
datasets feature. Unfortunately, it seems that we do not have any good BE
implementation for FreeBSD right now. If we had, personally I'd prefer to
have /usr/local in separate filesystem.
NOTE: Until then, remove these datasets.
Discussed on: src-committers
Submitted by: Bryan Drewery <bryan@shatow.net>
Reviewed by: Allan Jude <freebsd@allanjude.com>
MFC after: 3 days
so bootpool is imported after boot:
zpool_cache_load="YES"
zpool_cache_type="/boot/zfs/zpool.cache"
zpool_cache_name="/boot/zfs/zpool.cache"
otherwise /boot is a broken symlink after the system is up.
http://lists.freebsd.org/pipermail/freebsd-fs/2013-July/017891.html
NOTE: Fix a comment while here.
Reviewed by: gjb
annoying verbose boot error of the form
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
The ident returned by bhyve is a text string 'BHYVE-XXXX-XXXX', where
the X's are the first bytes of the md5 hash of the backing filename.
Reviewed by: neel
Approved by: re (gjb)
mount.devfs but mounts fdescfs. The mount happens just after
mount.devfs.
- rc.d/jail now displays whole error message from jail(8) when a jail
fails to start.
Approved by: re (gjb)
services configuration and enable it by default. Committed with
slight change to menu text for length and content.
Submitted by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
Patch from PR modified slightly for whitespace and style.
PR: bin/161547
Submitted by: Warren Block <wblock@wonkity.com>
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
