blacklistd has been renamed to blocklistd upstream, and a future
import into FreeBSD will follow that change. Support the new name
as an alias in config files.
Reviewed by: bz, delphij
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25865
Before switching to nvlists CTL merged previous and new options, so
any options not passed just kept previous value. Now CTL completely
replaces them, so we must pass everything still relevant.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
were cherry picked up the upstream OpenBSD repository. At some point we
will look at doing another import, but the diffs are substantial and will
require some careful testing.
Differential Revision: https://reviews.freebsd.org/D25021
MFC after: 2 weeks
Submitted by: gbe
Reviewed by: myself, bcr
vm_page_xbusy_claim() could clobber the waiter bit. For its original
use, kernel memory pages, this was not a problem since nothing would
ever block on the busy lock for such pages. r363607 introduced a new
use where this could in principle be a problem.
Fix the problem by using atomic_cmpset to update the lock owner. Since
this macro is defined only for INVARIANTS kernels the extra overhead
doesn't seem prohibitive.
Reported by: vangyzen
Reviewed by: alc, kib, vangyzen
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25859
- In the initial description of si_addr, do not claim that it is
always the faulting instruction.
- For si_addr, document that it is generally set to the PC for
synchronous signals, but that it can be set to the the address of
the faulting memory reference for some signals including SIGSEGV and
SIGBUS. In particular, while SIGSEGV generally sets si_addr to the
faulting memory reference, SIGBUS can vary. On some platforms, some
SIGBUS signals set si_addr to the PC and other SIGBUS signals set
si_addr to the faulting address depending on the specific hardware
exception.
- For si_trapno, synchronous signals should set this to some value.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25777
When -H is specified, for kernel threads the command is formatted as
"<proc name>/<td name>" and truncated to MAXCOMLEN. But each of the
proc name and td name may be up to MAXCOMLEN bytes in length.
Also handle the ki_moretdname field to ensure that the full thread name
gets printed. This is already handled correctly when formatting for
"-o tdname".
Reported by: freqlabs
Reviewed by: freqlabs
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25840
The Raspberry Pi GPIO config and state messages incorrectly return with
the tag length set to 0. We then check this value to have the response
flag set. Work around this by setting the response flag when setting the
GPIO config or state and this value is zero.
Sponsored by: Innovate UK
PowerPC support was fixed in r357596 by changing PCI bustag to BE as
part of the solution, but this caused regression on mips. This change
implements byte swapping of virtio PCI config area in the driver,
leaving lower layer untouched.
Submittnd by: Fernando Valle <fernando.valle@eldorado.org.br>
Reported by: arichardson
Reviewed by: alfredo, arichardson
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25416
Use the new Raspberry Pi firmware driver in the cpufreq driver. It is
intended all drivers that need to interact with the firmware will move to
use the firmware driver, this is the first.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25609
It will be needed by other eaarly drivers.
While here make the dependency of the mailbox formal with MODULE_DEPEND.
Reviewed by: manu
Sponsored by: Innovate UK
The firmware driver uses the mailbox driver to communicate with the
firmware. Make this a more formal dependency.
Reviewed by: manu
Sponsored by: Innovate UK
Provide missing rules for ena_datapath.c and ena_netmap.c,
which prevented the ENA driver from building.
This issue was showing up only when building the driver statically
into the kernel.
PR: 248116
Submitted by: Artur Rojek <ar@semihalf.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25796
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
This will be needed before a future GPIO controller driver is added
as the later enables regulators that leave the SDHCI controller disabled.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25834
Use the existing PMC_CPUID_LEN to size pmc_cpuid in the kernel and various
buffers for reading it in libpmc. This avoids some extra syscalls and
malloc/frees.
While in here, use strlcpy to copy a user-provided cpuid string instead of
memcpy, to make sure we terminate the buffer.
Reviewed by: mav
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25679
A base system OpenSSH update in 2016 or so removed a number of ciphers
from the default lists offered by the server/client, due to known
weaknesses. This caused POLA issues for some users and prompted
PR207679; the ciphers were restored to the default lists in r296634.
When upstream removed these ciphers from the default server list, they
moved them to the client-only default list. They were subsequently
removed from the client default, in OpenSSH 7.9p1.
The change has persisted long enough. Remove these extra ciphers from
both the server and client default lists, in advance of FreeBSD 13.
Reviewed by: markm, rgrimes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25833
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This constant is only used to size an array within the kernel. There are
probably no legitimate uses in userland. Worse, since the kernel's array
could theoretically change size over time, any use of that symbol in
userland wouldn't be forwards compatible to new kernel versions.
Reviewed by: jhb
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D25816
I've always found this a little bit confusing:
> sh
$ ^D> sh
$ ^D>
Reviewed by: 0mp, jilles
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25813
Signals are only reported for user traps, so T_USER is redundant. It
is also a software convention and not included in the value reported
by the hardware.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25769
vm_page_assert_xbusied() asserts that the busying thread is the current
thread. For some uses of vm_page_free_invalid() (e.g., error handling
in vnode_pager_generic_getpages_done()), this condition might not hold.
Reported by: Jenkins via trasz
Reviewed by: chs, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25828
The gate control bit offset was correctly specified, but AW_CLK_HAS_GATE
flag was not set.
Tested with (C)IR receiver on Orange Pi PC Plus.
Reviewed by: manu
MFC after: 1 week
Allow the serial number, firmware revision, model number and nominal media
rotation rate (nmrr) parameters to be set from the command line.
Note that setting the nmrr value can be used to indicate the AHCI
device is an SSD.
Submitted by: Wanpeng Qian
Reviewed by: jhb, grehan (#bhyve)
Approved by: jhb, grehan
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24174
This has for a while been replaced by makesyscalls.lua in the stock FreeBSD
build. Ensure downstreams get some notice that it'a going away if they're
reliant on it, maybe.
trying to set it.
r362490 added support for setting of the TimeCreate (va_birthtime) attribute,
but it does so without checking to see if the server supports the attribute.
This could result in NFSERR_ATTRNOTSUPP error replies to the Setattr operation.
This patch adds code to check that the server supports TimeCreate before
attempting to do a Setattr of it to avoid these error returns.
r362490 marked that the NFSv4 attribute TimeCreate (va_birthtime) is supported,
but it did not change the NFS server code to actually do it.
As such, errors could occur when unrolling a tarball onto an NFSv4 mounted
volume, since setting TimeCreate would fail with a NFSERR_ATTRNOTSUPP reply.
This patch fixes the server so that it does TimeCreate and also makes
sure that TimeCreate will not be set for a DS file for a pNFS server.
A separate commit will add a check to the NFSv4 client for support of
the TimeCreate attribute before attempting to set it, to avoid a problem
when mounting a server that does not support the attribute.
The failures will still occur for r362490 or later kernels that do not
have this patch, since they indicate support for the attribute, but do not
actually support the attribute.
The caller from kernel is expected to provide an valid g_class
pointer, instead of traversing the global g_class list, just
use that pointer directly instead.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25811
The two classes do not take any verbs and always gctl_error for
all requests, so don't bother to provide a ctlreq handler.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25810
implementation. The old description was left over from the 4.4 BSD Lite
import in 1994, and was a bit misleading (not all arches use simulated
reference bits, some implement reference tracking in hardware).
