defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
them and commit separately.
1. Rewrite the way growfs(8) finds the device and mount point. This makes
it possible to use e.g. "growfs /mnt"; it's also used to display more
helpful messages.
2. Be more user-friendly, using descriptive messages, like this:
OK to grow filesystem on /dev/md0, mounted on /mnt, from 9.8GB to 20GB? [Yes/No]"
3. Allow to specify the size (-s option) just like with mdconfig(8), i.e. with
postfixes ("mdconfig -s 10g").
4. Reload read-only filesystem after growing.
Reviewed by: kib, mckusick (earlier version)
Sponsored by: The FreeBSD Foundation
- Implement "configure" command to allow switching operation mode of
running device on-fly without destroying and recreation.
- Implement Active/Read mode as hybrid of Active/Active and Active/Passive.
In this mode all paths not marked FAIL may handle reads same time,
but unlike Active/Active only one path handles write requests at any
point in time. It allows to closer follow original write request order
if above layers need it for data consistency (not waiting for requisite
write completion before sending dependent write).
- Hide duplicate messages about device status change.
- Remove periodic thread wake up with 10Hz rate.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
summary structure. From now on, when there is no room for it,
we simply allocate new one in a newly added cylinder group.
This patch removes a conditional in updcsloc(), reindents some code
there, and removes unused routines. I decided to do it this way instead
of disabling reallocation when the filesystem is live and leaving it
as it is otherwise, because this allows for removal of lots of complicated
and hard to test code. Also, conditionally disabling it would result
in a different layout in filesystems resized online and offline, which
would look somewhat weird.
Reviewed by: mckusick
No objections from: kib
Sponsored by: The FreeBSD Foundation
reporting a number of bytes rather than a number of pages
PR: misc/165208
Submitted by: Arnaud Lacombe <lacombar@gmail.com>
Approved by: cperciva
MFC after: 3 days
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
Though we should open the TTY with O_NONBLOCK to prevent rc(8) execution
from potentially stalling, we must not forget to clear the flag later
on, to prevent read(2) calls from failing later on.
This prevented the shell pathname prompt from working properly.
Reported by: kib
regardless of whether -F (foreground) option is set or not.
Also, if -P option is specified, ignore pidfile setting from configuration
not only on start but on reload too. This fixes the issue when for hastd
run with -P option reload caused the pidfile change.
Reviewed by: pjd
MFC after: 1 week
net.inet.ip.fw.tables_max is now read-write.
- Bump IPFW_TABLES_MAX to 65535
Default number of tables is still 128
- Remove IPFW_TABLES_MAX from ipfw(8) code.
Sponsored by Yandex LLC
Approved by: kib(mentor)
MFC after: 2 weeks
If the environment doesn't offer a working /dev/console, the existing
version of init(8) will simply refuse running rc(8) scripts. This means
you'll only have a system running init(8) and nothing else.
Change the code to do the following:
- Open /dev/console like we used to do, but make it more robust to use
O_NONBLOCK to prevent blocking on a carrier.
- If this fails, use /dev/null as stdin and /var/log/init.log as stdout
and stderr.
- If even this fails, use /dev/null as stdin, stdout and stderr.
So why us this useful? Well, if you remove the `getpid() == 1' check in
main(), you can now use init(8) inside jails to properly execute rc(8).
It still requires some polishing, as existing tools assume init(8) has
PID 1.
Also it is now possible to use use init(8) on `headless' devices that
don't even have a serial boot console.
- Add support for IPv6 and interface extended tables
- Make number of tables to be loader tunable in range 0..65534.
- Use IP_FW3 opcode for all new extended table cmds
No ABI changes are introduced. Old userland will see valid tables for
IPv4 tables and no entries otherwise. Flush works for any table.
IP_FW3 socket option is used to encapsulate all new opcodes:
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t reserved[3]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
New opcodes added:
IP_FW_TABLE_XADD, IP_FW_TABLE_XDEL, IP_FW_TABLE_XGETSIZE, IP_FW_TABLE_XLIST
ipfw(8) table argument parsing behavior is changed:
'ipfw table 999 add host' now assumes 'host' to be interface name instead of
hostname.
New tunable:
net.inet.ip.fw.tables_max controls number of table supported by ipfw in given
VNET instance. 128 is still the default value.
New syntax:
ipfw add skipto tablearg ip from any to any via table(42) in
ipfw add skipto tablearg ip from any to any via table(4242) out
This is a bit hackish, special interface name '\1' is used to signal interface
table number is passed in p.glob field.
Sponsored by Yandex LLC
Reviewed by: ae
Approved by: ae (mentor)
MFC after: 4 weeks
left-over from ancient C times, and a frequent typo) in growfs.c:
sbin/growfs/growfs.c:1550:8: error: use of unary operator that may be intended as compound assignment (-=) [-Werror]
blkno =- 1;
^~
Use 'blkno = -1' instead, to silence the error.
and fixing the format string in sbin/fsdb/fsdbutil.c instead.
Note the remark "Work around a problem with format string warnings and
ntohs macros" was actually incorrect. The DIP(dp, di_nlink) macro
invocation actually returned an int, due to its ternary expression, even
though the di_nlink members of struct ufs1_dinode and struct ufs2_dinode
are both defined as int16_t.
MFC after: 2 weeks
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.
Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)
As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:
CC=clang
CXX=clang++
CPP=clang-cpp
MFC after: 2 weeks
