Commit Graph

183677 Commits

Author SHA1 Message Date
hrs
b4dab2192a Document sin6_scope_id handling change and bump FreeBSD_version to 1000025. 2012-11-23 12:12:06 +00:00
hrs
c78ae2ca88 - Use sin6_scope_id instead of sin6_addr.s6_addr[2].
- Support a flag for ALLOW/BLOCK in source-specific multicast (RFC 4604).
2012-11-23 11:21:58 +00:00
kevlo
ec5aeeffd0 Document that getpeername(2) and getsockname(2) can fail with EINVAL.
Reviewed by:	glebius
2012-11-23 10:14:54 +00:00
kevlo
83865012c3 According to r221124, the default NFS server and client are no longer
experimental.
2012-11-23 08:47:57 +00:00
kevlo
ee3151e7ea Catch up with r243046. KTR buffer can be changed at runtime. 2012-11-23 08:44:36 +00:00
hselasky
681b637c99 Remove no longer needed quirk.
Submitted by:	Mark Johnston
2012-11-23 08:22:06 +00:00
gonzo
1be6a30bf9 Now that we have working USB keyboard add ukbd to the syscons-enabling
part of config
2012-11-23 07:58:12 +00:00
adrian
f994c71b65 Use a 64 bit TSF write to update the TSF adjust, rather than a 32 bit
TSF write.

The TSF_L32 update is fine for the AR5413 (and later, I guess) 11abg NICs
however on the 11n NICs this didn't work.  The TSF writes were causing
a much larger time to be skipped, leading to the timing to never
converge.

I've tested this 64 bit TSF read, adjust and write on both the
11n NICs and the AR5413 NIC I've been using for testing.  It works
fine on each.

This patch allows the AR5416/AR9280 to be used as a TDMA member.
I don't yet know why the AR9280 is ~7uS accurate rather than ~3uS;
I'll look into it soon.

Tested:

* AR5413, TDMA slave (~ 3us accuracy)
* AR5416, TDMA slave (~ 3us accuracy)
* AR9280, TDMA slave (~ 7us accuracy)
2012-11-23 05:52:22 +00:00
adrian
428f085c83 Fix up the nexttbtt -> TSF delta calculation to not wrap ridiculously
on the 802.11n NICs.

The 802.11n NICs return a TBTT value that continues far past the 16 bit
HAL_BEACON_PERIOD time (in TU.)  The code would constrain nextslot to
HAL_BEACON_PERIOD, but it wasn't constraining nexttbtt - the pre-11n
NICs would only return TU values from 0 -> HAL_BEACON_PERIOD.  Thus,
when nexttbtt exceeded 64 milliseconds, it would not wrap (but nextslot
did) which lead to a huge tsfdelta.

So until the slot calculation is converted to work in TSF rather than
a mix of TSF and TU, "make" the nexttbtt values match the TU assumptions
for pre-11n NICs.

This fixes the crazy deltatsf calculations but it doesn't fix the
non-convergent tsfdelta issue.  That'll be fixed in a subsequent commit.
2012-11-23 05:38:38 +00:00
adrian
8b099e2d4f Add the HAL wrapper for settsf64. 2012-11-23 05:33:01 +00:00
adrian
44e238e0b7 Implement a HAL method to set a 64 bit TSF value.
TODO: implement it (and test) for the AR5210/AR5211.
2012-11-23 05:32:24 +00:00
gonzo
0f275f4278 Multiple fixes for BCM2835 framebuffer
- Get resolution settings from FDT blob
- Properly handle 24 and 16 bits per pixel
- Add colors support for text console
2012-11-23 04:30:54 +00:00
jmallett
d8e808617d Use MIPS_PHYS_TO_DIRECT_UNCACHED rather than a homegrown version which is not
compatible with 32-bit kernels.
2012-11-23 04:28:13 +00:00
gonzo
81ead3b400 Look for MAC address in FDT tree nodes that are usb network devices and
have either "mac-address" or "local-mac-addrress" property.
2012-11-23 03:34:12 +00:00
gonzo
95bc8dafff Make FDT blob compatible with Raspberry Pi firmware.
Rasperry Pi firmware has a set of hardcoded pathes it uses to fill
FDT with system-specific information like display resolution, memory
size, UART and SDHCI clocks, ethernet MAC address. Handle two of them:

- Add placeholder for ethernet MAC address
- Move display node out of "axi" node
2012-11-23 03:24:52 +00:00
cperciva
748c98fc62 MFS security patches which seem to have accidentally not reached HEAD:
Fix insufficient message length validation for EAP-TLS messages.

Fix Linux compatibility layer input validation error.

Security:	FreeBSD-SA-12:07.hostapd
Security:	FreeBSD-SA-12:08.linux
Security:	CVE-2012-4445, CVE-2012-4576
With hat:	so@
2012-11-23 01:48:31 +00:00
avg
95ab21ebed acpi_cpu: use fixed resource ids for cx state i/o resources
... instead of the ever increasing ones.
Also, do free old resources when allocating new ones when cx states
change.

Tested by:	Tom Lislegaard <Tom.Lislegaard@proact.no>
Obtained from:	jkim
MFC after:	1 week
2012-11-22 14:40:26 +00:00
avg
c20b4131f0 remove vop_lookup_pre and vop_lookup_post
Suggested by:	kib
MFC after:	5 days
2012-11-22 10:36:10 +00:00
pluknet
a9da2b9b0c [mdoc] remove hard sentence breaks.
MFC after:	3 days
2012-11-22 10:24:30 +00:00
pluknet
7ab604d8a6 core(5) references sysctl debug.num_cores, but it is really debug.ncores.
PR:		docs/173831
MFC after:	1 week
2012-11-22 09:56:13 +00:00
davide
e52463677a - Remove reset of vpp pointer in some places as long as it's not really
useful and has the side effect of obfuscating the code a bit.
- Remove spurious references to simple_lock.

Reported by:	attilio [1]
Sponsored by:	iXsystems inc.
2012-11-22 09:13:45 +00:00
davide
017de7d030 Until now, smbfs_fullpath() computed the full path starting from the
vnode and following back the chain of n_parent pointers up to the root,
without acquiring the locks of the n_parent vnodes analyzed during the
computation. This is immediately wrong because if the vnode lock is not
held there's no guarantee on the validity of the vnode pointer or the data.
In order to fix, store the whole path in the smbnode structure so that
smbfs_fullpath() can use this information.

Discussed with:		kib
Reported and tested by:		pho
Sponsored by:		iXsystems inc.
2012-11-22 08:58:29 +00:00
sjg
855b0bb00b If .PARSEDIR is defined we have bmake, and CTFCONVERT_CMD can be empty.
PR:		172440
Approved by:	marcel (mentor)
2012-11-22 04:53:09 +00:00
sjg
ab20e0c66f INSTALL_AS_USER: output of id -un will never match 0 so use id -u
and USER for BINOWN etc.

Approved by:	marcel (mentor)
2012-11-22 04:50:42 +00:00
emaste
39e033ecaa Use %u for unsigned serial number 2012-11-22 03:54:51 +00:00
hselasky
61b7088a9c Fix uplcom clear stall logic for PL2303HX.
Submitted by:	Mark Johnston
MFC after:	1 week
2012-11-21 22:04:40 +00:00
crees
133206e35a Revert r243228. This commit appears to cause more trouble than
it was designed to avoid; the issue described in the PR was no
longer an issue anyway.
2012-11-21 18:12:28 +00:00
jh
8800730625 Print correct unit number when attaching preloaded memory disks.
Retire now unused mdunits variable.
2012-11-21 17:05:57 +00:00
jh
e82a3d82c2 Disallow attaching preloaded memory disks via ioctl.
- The feature is dangerous because the kernel code didn't check
  validity of the memory address provided from user space.
- It seems that mdconfig(8) never really supported attaching preloaded
  memory disks.
- Preloaded memory disks are automatically attached during md(4)
  initialization. Thus there shouldn't be much use for the feature.

PR:		kern/169683
Discussed on:	freebsd-hackers
2012-11-21 16:56:47 +00:00
adrian
4172690a5e Setup BAT0 and BAT1 on the Wii.
This is the missing piece for FreeBSD/Wii, but there's still a lot of
work ahead. We have to reset the MMU in locore before continuing
the boot process because we don't know how the boot loaders might
have setup the BATs. We also disable the PCI BAT because there's no PCI
bus on the Wii.

Thanks to Nathan Whitehorn and Peter Grenhan for their help.

Submitted by:	Margarida Gouveia
2012-11-21 08:04:21 +00:00
alc
e12b2ad698 Correct an error in r230623. When both VM_ALLOC_NODUMP and VM_ALLOC_ZERO
were specified to vm_page_alloc(), PG_NODUMP wasn't being set on the
allocated page when it happened to be pre-zeroed.

MFC after:	5 days
2012-11-21 06:26:18 +00:00
cognet
79f863d433 Make sure the address starts on a cache line boundary. 2012-11-21 01:38:40 +00:00
dim
45112bd543 Do not expose LIBCXXRT and LIBCPLUSPLUS in bsd.libnames.mk, if
WITHOUT_LIBCPLUSPLUS is specified.

Submitted by:	Garrett Cooper <yanegomi@gmail.com>
MFC after:	3 days
2012-11-20 21:26:13 +00:00
jkim
3fd80a8266 Merge ACPICA 20121114. 2012-11-20 21:01:59 +00:00
emaste
3c42bc6af3 Non-void function should return a value.
Found by: clang
2012-11-20 19:23:44 +00:00
kib
6d46d7b7ab Schedule garbage collection run for the in-flight rights passed over
the unix domain sockets to the next tick, coalescing the serial calls
until the collection fires.  The thought is that more work for the
collector could arise in the near time, allowing to clean more and not
spend too much CPU on repeated collection when there is no garbage.

Currently the collection task is fired immediately upon unix domain
socket close if there are any rights in flight, which caused excessive
CPU usage and too long blocking of the threads waiting for
unp_list_lock and unp_link_rwlock in write mode.

Robert noted that it would be nice if we could find some heuristic by
which we decide whether to run GC a bit more quickly.  E.g., if the
number of UNIX domain sockets is close to its resource limit, but not
quite.

Reported and tested by:	Markus Gebert <markus.gebert@hostpoint.ch>
Reviewed by:	rwatson
MFC after:	2 weeks
2012-11-20 15:45:48 +00:00
kib
f0eb44bc70 Add a special meaning to the negative ticks argument for
taskqueue_enqueue_timeout().  Do not rearm the callout if it is
already armed and the ticks is negative.  Otherwise rearm it to fire
in abs(ticks) ticks in the future.

The intended use is to call taskqueue_enqueue_timeout() for the given
timeout_task with the same negative ticks argument.  As result, the
task is scheduled to execute not further than abs(ticks) ticks in
future, and the consequent enqueues are coalesced until the already
scheduled task is finished.

Reviewed by:	rwatson
Tested by:	Markus Gebert <markus.gebert@hostpoint.ch>
MFC after:	2 weeks
2012-11-20 15:33:48 +00:00
kib
f31aa350da Remove the check and panic for an impossible condition. The NULL
lowervp vnode v_vnlock would cause panic due to NULL pointer
dereference much earlier.

MFC after:	1 week
2012-11-20 15:25:00 +00:00
kib
511a29a5c4 Fix module build after r243245. 2012-11-20 15:23:22 +00:00
ae
37d897b509 Connect ip6_mroute kernel module to the build.
MFC after:	1 week
2012-11-20 14:11:27 +00:00
ae
dcda6a6951 Remove opt_inet.h, it isn't required here.
MFC after:	1 week
2012-11-20 14:09:37 +00:00
bapt
1bf34f2c1b In NIS mode first chmod(2) the temporary file and is succeed then rename(2) 2012-11-20 14:05:46 +00:00
bapt
2ed31d29a1 only rename(2) after chmod(2) has succeed
report error if chmod(2) fails

Reported by:	jh
2012-11-20 14:03:09 +00:00
jh
25dd09b996 - Don't pass geom and provider names as format strings.
- Add __printflike() attributes.
- Remove an extra argument for the g_new_geomf() call in swapongeom_ev().

Reviewed by:	pjd
2012-11-20 12:32:18 +00:00
bapt
7df2814837 Correctly set the password file mode after renaming in NIS mode 2012-11-20 10:59:41 +00:00
bapt
9acb3e40c2 change mode the group file to 0644 after a successfull rename(2) 2012-11-20 07:22:07 +00:00
hrs
f5a468d92e Do not put "already running" message when rc_quiet=yes.
PR:	bin/165477
2012-11-20 04:45:04 +00:00
marcel
02a19a0c26 Unbreak amd64 cross-build where amd64 is the target. While clang
may be installed as cc and we don't need to build gcc as a
cross-tools, we still build gcc and thus need cc_tools built
as a build tool. Not doing this results in building gengenrtl with
the target compiler while we need to run it on the build machine.
2012-11-20 03:21:26 +00:00
eadler
d5971a0e55 Remove unneeded includes.
Tested with "make universe"; there are no conditional features.

Approved by:	cperciva
MFC after:	3 daus
2012-11-20 02:12:01 +00:00
eadler
1eb41dfcc4 Add 'w' flag to:
Use whitespace (spaces and tabs) as the delimiter.
Consecutive spaces and tabs count as one single field
separator.

Reviewed by:	swildner@dragonflybsd.org
Approved by:	cperciva
Obtained from:	DragonFlyBSD
MFC after:	1 week
2012-11-20 01:57:21 +00:00