This version fixes an issue (missing pop of top-of-stack value in the
"P" command of the dc program).
This issue did not affect the bc program, since it does not use dc as
an back-end to actually perform the calculations as was the case with
the traditional bc and dc programs.
The major number has been bumped due to Windows support that has been
added to this version. It does not correspond to a major change that
might affect FreeBSD.
MFC after: 3 days
Update to version 4.0.0
This version fixes an issue (missing pop of top-of-stack value in the
"P" command of the dc program).
This issue did not affect the bc program, since it does not use dc as
an back-end to actually perform the calculations as was the case with
the traditional bc and dc programs.
The major number has been bumped due to Windows support that has been
added to this version. It does not correspond to a major change that
might affect FreeBSD.
Add a man page for gptboot.efi. Describe when and how to use this as it differs
from the BIOS cases. Include cross reference for the preferred method described
in efibootmgr(8) as well as cross links in both gptboot(8) and gptboot.efi(8) to
the other.
This man page was heavily copied from the gptboot.8 man page by Warren Block.
They are different enough to need separate man pages for clarity, but there's
enough similarity that I worry about the duplication. In the really long term,
gptboot(8) will disappear, so having the same info here will help when that
day comes. In the short to medium term, the information is likely to not
change in gptboot(8) and any changes to gptboot.efi(8) will be easier to
make in a separate copy.
loader.efi(8) needs a complete rewrite from scratch, otherwise I'd have
referenced gptboot.efi(8) from there.
Suggetions from: cress@, mhorne@
Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D29591
They have their own lifetime managed by the containing objects.
Premature and unexpected free causes corruption.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
the variables hold pointers to a linux_cdev, not to a FreeBSD cdev.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Add flow_control to hw.ixl tunables tree to let override
initial flow control configuration for all interfaces.
Keep using configuration set by NVM by default.
Reviewed by: erj@, gallatin@
Tested by: gowtham.kumar.ks_intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D29338
freebsd-update compares the dates on man pages with mandoc.db, and if
any newer pages are found it regenerates mandoc.db.
Previously, if mandoc.db did not already exist the check failed and
freebsd-update then failed to create one. Now, check that mandoc.db
exists before performing the check for newer pages.
Reported by: bdrewery (in D10482)
Reviewed by: gordon
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29575
To support -DNO_ROOT work. The top-level installworld target creates a
new METALOG starting with `#mtree 2.0` so it needs to be first, to avoid
overwriting installkernel METALOG entries.
Reviewed by: gjb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29582
Older G4 and G3 models have a programmer's switch that can be used to
generate an interrupt to drop into the debugger.
This code hadn't been tested for a long time. It had been broken back
in 2005 in r153050.
Repair and modernize the code and add it to GENERIC.
Reviewed by: jhibbits (approved w/ removal of unused sc_dev var)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29131
If the root file system is composed from multiple devices, wait for
devices to be ready before running zpool and dumpon rc scripts.
An example of this is if the bulk of the root file system exists on a
fast device (e.g. NVMe) but the /var directory comes from a ZFS dataset
on a slower device (e.g. SATA). In this case, it is possible that the
zpool import may run before the slower device has finished being probed,
leaving the system in an intermediate state.
Fix is to add root_hold_wait to the zpool and dumpon (which has a
similar issue) rc scripts.
PR: 242189
Reported by: osidorkin@gmail.com
Reviewed by: allanjude
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29101
This fixes a problem where ctld(8) would refuse to start on boot
with a specific IP address to listen on configured in ctl.conf(5).
It also fixes a problem where ctld(8) would fail to start with
some network interfaces which require a sysctl.conf(5) tweak
to configure them, eg to switch them from InfiniBand to IP mode.
PR: 232397
Reported By: Mahmoud Al-Qudsi <mqudsi at neosmart.net>
Submitted By: Jeremy Faulkner <gldisater at gmail.com>
Reviewed By: mav
Differential Revision: https://reviews.freebsd.org/D29578
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
Usually on boot the MPS is already configured by BIOS. But we've
found that on hot-plug it is not true at least for our Supermicro
X11 boards. As result, mismatch between root's configuration of
256 bytes and device's default of 128 bytes cause problems for some
devices, while others seem to work fine.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
These two have proven to be useful during debugging. We may as well keep
them permanently.
Others will be added as their utility becomes clear.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29555
before this change pf_route operated on the semantic that pf runs
when packets go over an interface, so when pf_route changed which
interface the packet was on it would run pf_test again. this change
changes (restores) the semantic that pf is only supposed to run
when packets go in or out of the network stack, even if route-to
is responsibly for short circuiting past the network stack.
just to be clear, for normal packets (ie, those not touched by
route-to/reply-to/dup-to), there isn't a difference between running
pf when packets enter or leave the stack, or having pf run when a
packet goes over an interface.
the main reason for this change is that running the same packet
through pf multiple times creates confusion for the state table.
by default, pf states are floating, meaning that packets are matched
to states regardless of which interface they're going over. if a
packet leaving on em0 is rerouted out em1, both traversals will end
up using the same state, which at best will make the accounting
look weird, or at worst fail some checks in the state and get
dropped.
another reason for this commit is is to make handling of the changes
that route-to makes consistent with other changes that are made to
packet. eg, when nat is applied to a packet, we don't run pf_test
again with the new addresses.
the main caveat with this diff is you can't have one rule that
pushes a packet out a different interface, and then have a rule on
that second interface that NATs the packet. i'm not convinced this
ever worked reliably or was used much anyway, so we don't think
it's a big concern.
discussed with many, with special thanks to bluhm@, sashan@ and
sthen@ for weathering most of that pain.
ok claudio@ sashan@ jmatthew@
Obtained from: OpenBSD
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29554
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. This will fix the back channel, but the
first attempt at a callback like CB_RECALL will already have
failed. Without this patch, a CB_RECALL will not be retried
and that can result in a 5 minute delay until the delegation
times out.
This patch modifies the code so that it will retry the
CB_RECALL every couple of seconds, often avoiding the
5 minute delay.
This is not critical for correct behaviour, but avoids
the 5 minute delay for the case where the Linux client
re-binds the back channel via BindConnectionToSession.
MFC after: 2 weeks
GNU readelf exits with an error for a number of invalid file cases.
Previously ELF Tool Chain readelf always exited with 0. Now we exit 1
upon detecting an error with one or more input files, but in any case
all of them are processed.
This should catch common failure cases. We still do not report an error
for some types of malformed ELF files, but this is consistent with GNU
readelf.
PR: 252727
Reviewed by: jkoshy, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29377
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. It will do this for every RPC
reply until it no longer sees the flag.
Without that patch, this will happen until the client does
an Open, which will clear LCL_CBDOWN.
This patch clears LCL_CBDOWN right away, so that
NFSV4SEQ_CBPATHDOWN will no longer be sent to the client
in Sequence replies and the Linux client will not repeat
the BindConnectionToSession RPCs.
This is not critical for correct behaviour, but reduces
RPC overheads for cases where the Open will not be done
for a while.
MFC after: 2 weeks
Follow-up to the removal of the mcov from kernel.
Noted by: mckusick
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29563
After e7a5b3bd05, the la->delay value was adjusted after
being set by the starvation_limit code block, which is wrong.
Reported By: avg
Reviewed By: avg
Fixes: e7a5b3bd05
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29513
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
This allows the xhci tablet device to be recognized and a PCI device
instantiated.
Reviewed by: jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 3 months.
This was ported from illumos but not completely done. Currently we do
not perform type deduplication between KLDs and the kernel, i.e., kernel
modules have a complete type graph. So, remove it for now since it's
not functional and complicates the task of modifying various CTF type
definitions, and we are hitting some limits in the current format which
necessitate an update.
No functional change intended.
MFC after: 2 weeks
