- add new diag commands: devinfo, sysinfo for U-Boot-style details about the system
configuration
- better memory info summary
- style corrections
Obtained from: Semihalf
frequencies (and having different cache sizes) so use the STICK
(System TICK) timer, which was introduced due to this and is
driven by the same frequency across all CPUs, instead of the
TICK timer, whose frequency varies with the CPU clock, to drive
hardclock. We try to use the STICK counter with all CPUs that are
USIII or beyond, even when not necessary due to identical CPUs,
as we can can also avoid the workaround for the BlackBird erratum
#1 there. Unfortunately, using the STICK counter currently causes
a hang with USIIIi MP machines for reasons unknown, so we still
use the TICK timer there (which is okay as they can only consist
of identical CPUs).
- Given that we only (try to) synchronize the (S)TICK timers of APs
with the BSP during startup, we could end up spinning forever in
DELAY(9) if that function is migrated to another CPU while we're
spinning due to clock drift afterwards, so pin to the CPU in order
to avoid migration. Unfortunately, pinning doesn't work at the
point DELAY(9) is required by the low-level console drivers, yet,
so switch to a function pointer, which is updated accordingly, for
implementing DELAY(9). For USIII and beyond, this would also allow
to easily use the STICK counter instead of the TICK one here,
there's no benefit in doing so however.
While at it, use cpu_spinwait(9) for spinning in the delay-
functions. This currently is a NOP though.
- Don't set the TICK timer of the BSP to 0 during at startup as
there's no need to do so.
- Implement cpu_est_clockrate().
- Unfortunately, USIIIi-based machines don't provide a timecounter
device besides the STICK and TICK counters (well, in theory the
Tomatillo bridges have a performance counter that can be (ab)used
as timecounter by configuring it to count bus cycles, though unlike
the performance counter of Schizo bridges, the Tomatillo one is
broken and counts Sun knows what in this mode). This means that
we've to use a (S)TICK counter for timecounting, which has the old
problem of not being in sync across CPUs, so provide an additional
timecounter function which binds itself to the BSP but has an
adequate low priority.
in 182691, as the sparc64 version is going to be rototilled and sun4v
currently can't be verified to still work with the new sparc64 one
due to its overall state.
Global data (pointed by R2 on PowerPC) in principle is not guaranteed to be in
proximity of U-Boot heap (where the API signature is placed) accross different
architectures and platforms. Instead, use U-Boot stack pointer as a hint for
the search instead of the global data; this method tends to be more uniform
accross different platforms.
Obtained from: Semihalf
to an integer divide by zero panic in the kernel, if the kernel was
run with hz<1000.
Neither i386, pc98, amd64 or sparc64 are affected in the currently
supported branches and default configuration.
Submitted by: Miikka Saukko, Ossi Herrala and Jukka Taimisto from
the CROSS project at Codenomicon Ltd. via CERT-FI.
Reviewed by: bz, rwatson
Security: CVE-2008-2464
MFC after: 8 hours
loop pointed out by cognet@ that occurs when calling strtod() with a
string representing a number between DBL_MAX and 2*DBL_MAX, when the
rounding mode is anything other than the default.
contexts as rtld's malloc is not thread safe and is only supposed to be
called with exclusive bind lock already held.
The originating PR submitted a patch on top of different pre-requisite
workaroud for unsafe dlopen calls, and the patch was midief slighlty to apply
to stock sources for the purpose of this commit. Running rtld malloc from
unlocked contexts is a bug on its own.
PR: 126950
Submited by: Oleg Dolgov
at least pass muster with the loader on 3.0.3
Note that this doesn't actually make it work as Xen 3.0.3
appears to disallow recursive mappings on the page directory
sizes (and running at different frequencies) so move the cacheinfo
to the PCPU data. While at it, remove some redundant and/or unused
members from struct cacheinfo.
- In sparc64_init don't assume the first CPU node we find in the OFW
device tree is the BSP.
in order to avoid the invasive probes done by identify-routines of
ISA drivers, which may access unassigned addresses or those of
unrelated devices and thus in turn can trigger master/target aborts
as revealed by r182108 and ahc(4). I think that this is also the
cause of the hang previously seen on B100 blades during boot.
Bypassing isa_probe_children(9) also avoids adding ISA hints, which
just can be wrong for sparc64.
Reported by: gavin
After the MPSAFE TTY import we support an additional rlimit, called
RLIMIT_NPTS. This limit allows you to cap the amount of pseudo-terminals
allocated by one user.
We forgot to add support for this limit to limits(1), which means it
crashed. Add the proper bits to make it work like it should.
Unfortunately not all shells actually implement the RLIMIT, so
unfortunately I suspect it to be broken with certain shells.
Submitted by: Yuriy Tsibizov <yuriy tsibizov gfk ru>
processes, clear PCB_32BIT and PCB_GS32BIT bits [1].
- Reread the fs and gs bases from the msr unconditionally, not believing
the values in pcb_fsbase and pcb_gsbase, since usermode may reload
segment registers, invalidating the cache. [2].
Both problems resulted in the wrong fs base, causing wrong tls pointer
be dereferenced in the usermode.
Reported and tested by: Vyacheslav Bocharov <adeepv at gmail com> [1]
Reported by: Bernd Walter <ticsoat cicely7 cicely de>,
Artem Belevich <fbsdlist at src cx>[2]
Reviewed by: peter
MFC after: 3 days
The ttydisc_getc() routine obtains a read length from ttyoutq_read().
For no valid reason, the current code stores this value in an int, and
returns a size_t. There is no need to perform this useless conversion.
Obtained from: //depot/projects/mpsafetty/...
