tree parsing opt-out rather than opt-in. All FDT-based systems as well as
PowerPC systems with real Open Firmware use the CHRP-derived binding that
includes it, which makes SPARC the odd man out here. Making it opt-out
avoids astonishment on new platform bring up.
a problem on 32-bit systems which have ram occupying the end of the physical
address space -- for example, a block of ram at 0x80000000 with a size of
0x80000000 was overflowing 32 bit math and ending up with a calculated size
of zero.
This is a fix for one of the two problems mentioned in the PR. Something
similar will need to be done on the kernel side before the PR is closed.
PR: 201614
The ath hal and driver code all assume the world is an x86 or the
bus layer does an explicit bus flush after each operation (eg netbsd.)
However, we don't do that.
So, to be "correct" on platforms like sparc64, mips and ppc (and maybe
ARM, I am not sure), just do explicit barriers after each operation.
Now, this does slow things down a tad on embedded platforms but I'd
rather things be "correct" versus "fast." At some later point if someone
wishes it to be fast then we should add the barrier calls to the HAL and
driver.
Tested:
* carambola 2 (AR9331.)
rounding) has better spread. Implement fp16_sin() to go along with
fp16_cos(). In the rendering loop, switch from addition to subtraction
so the center of the pattern will be a trough rather than a peak. This
is completely arbitrary, of course, but looks better to me.
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
When gssd exits it leaves the kernel state set by
gssd_syscall(). nfsd sees this and waits endlessly
in an unkillable state for gssd to come back. If you
had acidentally started gssd then stopped it, then
started nfsd you'd be in a bad way until you either
restarted gssd or rebooted the system. This change
fixes that by setting the kernel state to "" when
gssd exits.
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: iXsystems
LBC block size can only be up to 4GB. The existing code already clamps it, but
mixes unsigned long and uint32_t. This works on 32-bit targets, but not 64-bit,
so isn't completely correct. This fixes the type confusion.
libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
Newer Book-E cores (e500mc, e5500, e6500) do not support the WE bit in the MSR,
and instead delegate CPU idling to the SoC.
Perhaps in the future the QORIQ_DPAA option for the mpc85xx platform will become
a subclass, which will eliminate most of the #ifdef's.
for all geom classes, e.g. geom_uzip(4)
- These tests require root. Skip all of the tests if they're run as non-root
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
we're assuming hz=1000 and not gracefully handling when it isn't.
The math involved will return 0 for hz < 1000, which it is on some
platforms and on DragonflyBSD.
This doesn't fix it, it:
* converts one manual use over to use the macro, and
* comments where it needs some thought/fixing.
I'll think about this a bit more before fixing it.
Submitted by: imre@vdsz.com
Fix a clang 3.8.0 warning in pflogd.c:
contrib/pf/pflogd/pflogd.c:769:8: error: logical not is only applied to the left hand side of this comparison [-Werror,-Wlogical-not-parentheses]
if (!if_exists(interface) == -1) {
^ ~~
The if_exists() function does not return -1, and even if it did, it
would not be the correct way to check. Just ditch the == -1 instead.
Obtained from: OpenBSD's pflogd.c 1.49
MFC after: 3 days
For determining the compiler version, quote the string to be echo'd,
otherwise the command might fail. This is because clang -v now results
in the following:
FreeBSD clang version 3.8.0 (trunk 256633) (based on LLVM 3.8.0svn)
The second "3.8.8svn)" string tripped up the shell command.
MFC after: 3 days
This is a port from openbsd. It's incomplete and unstable, but it's better
than nothing. I have no plans to MFC this until it's complete and stable.
Submitted by: kevlo
With the new expand.c code, the intermediate representation passed to the
pathname generation code only contains CTLESC, not CTLQUOTEMARK.
CTLQUOTEMARK now only occurs in the text of NARG nodes (output of the
parser).
If the system was booted with ZFS, a new menu item (#7) appears
It contains an autogenerated list of ZFS Boot Environments
This allows the user to switch to an alternate root file system
Use Cases:
- Revert a failed upgrade
- Concurrently run different versions of FreeBSD with common home directory
- Easier integration with the sysadmin/beadm utility
Requested by: many
Reviewed by: dteske
MFC after: 10 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3167
Thinking this through, and looking at process_assignment, I believe
moving the code would be wrong considering that set_conf_files is
called in one condition while set_nextboot_conf is guarded by a
different condition of having nextboot_enable="YES". So these must
stay separated and not combined.
MFC after: 1 week
This avoids the need to add and remove CTLESC bytes if pathname generation
will not be performed (set -f).
Side effect: the order of operations is slightly different: pathname
generation in ${$+* $(CMD)} will not see filesystem changes from CMD.
relocation fixups unsupported by the self_reloc() code, and don't optimize
memcpy/memset using floating point registers, because in a standalone
environment nothing has initialized the fpu hardware.
This simplifies the code and should be faster in some cases.
Side effect: the order of operations is different so that the value of IFS
used when IFS is modified during expansion (${IFS:=...}, ${IFS=...} or
$((...IFS=...))) may be different. Note that this order is highly unportable
between shells.
- Declare some static functions in linux_compat.c instead if inside
various header files.
- Prefix FreeBSD local functions in the LinuxKPI with "linux_" to
avoid symbol name conflicts in the future and to make debugging
easier.
- Make the "struct kobj_ktype" declaractions constant to shave off a
few bytes from the data segment.
MFC after: 1 week
Sponsored by: Mellanox Technologies
