* Save the required VFP registers on context switch. If the exception bit
is set we need to save and restore the FPINST register, and if the fp2v
bit is also set we need to save and restore FPINST2.
* Move saving and restoring the floating point control registers to C.
* Clear the fpexc exception and fp2v flags on a floating-point exception.
* Signal a SIGFPE if the fpexc exception flag is set on an undefined
instruction. This is how the ARM core signals to software there is a
floating-point exception.
is already correctly reset to the FPU user save area, only PCB_KERNFPU
flag might leak from old thread state into the new state.
For creation of the user-mode thread, the change is nop since
corresponding syscall code does not use FPU. On the other hand,
creation of a kernel thread forks from a thread selected arbitrary
from proc0, which might use FPU.
Reported and tested by: Chris Torek <torek@torek.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
o Move vd_bitbltchr vga's driver method to vd_maskbitbltchr.
o Implement new vd_bitbltchr method for vga driver. (It do single write for 8
pixels, have to be a bit faster).
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
This is useful for debugging compat modules.
Sponsored by: EMC / Isilon Storage Division
Obtained from: Isilon OneFS (based on work by Jeff Hughes)
MFC after: 2 weeks
- When clearing a bit for a cpuid in pmap->pm_save, ensure that the
cpuid is not set in pm_active. The pm_save indicates which CPUs may
have cached translations for given PCID, which implies that a CPU
executing with the given pmap active have the translations
cached. [1]
- In smp_masked_invltlb(), pass pmap to smp_targeted_tlb_shootdown(). [1]
- In invlrng_handler(), check for the special values of pcid (0 and
-1) and do corresponding global or total invalidations before
checking for performing PCID-specific range invalidation with
INVPCID_ADDR. [2]
- In invltlb_pcid_handler(), do not read %cr3 unless needed. [2]
- Do minor style tweaks. [2]
Submitted by: Henrik Gulbrandsen <henrik@gulbra.net> [1]
Other parts sponsored by: The FreeBSD Foundation [2]
Tested by: Henrik Gulbrandsen, pho
MFC after: 1 week
With this change (and loader.efi from the projects/uefi branch) we can now
boot under qemu using the OVMF UEFI firmware image with the limitation
that a serial console is required.
(This is largely r246337 from the projects/uefi branch.)
Sponsored by: The FreeBSD Foundation
vt(9) crash on resume fixed, but Xorg still have damaged screen on resume (at
least with i915kms), so better to switch to VT0 before suspend and back on
resume.
Sponsored by: The FreeBSD Foundation
Prototypes specific to ia64 have been left in this file for now, under
__ia64__, rather than moving them to a new header under sys/ia64.
I anticipate that (some of) the corresponding functions will be shared
by the amd64, arm64, i386, and ia64 architectures, and we can adjust
this as EFI support on other than ia64 continues to develop.
Sponsored by: The FreeBSD Foundation
Statically allocated terminal window have not initialized callout handler, so we
have to initialize it even for existing window if it is console window.
Reported by: gjb and many
Tested by: gjb
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
restricted to a single FIB in a multifib system.
Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.
sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).
sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.
tests/sys/netinet/fibs_test.sh
Clear ATF expected error.
PR: kern/167947
Submitted by: Nikolay Denev <ndenev@gmail.com> (previous version)
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
combination with dtrace scripts, which have "#!/usr/sbin/dtrace -Cs"
shebang lines. This is because dtrace positions the file pointer after
the shebang line, before passing the file to GNU cpp.
To fix the warning, adjust the size downwards by the current position,
after a bit of sanity checking.
Suggested by: avg
MFC after: 1 week
from clang about possible keywords being treated as identifiers for the
remainder of the translation unit (a.k.a. -Wkeyword-compat), when using
libstdc++ in combination with -Wsystem-headers. This will not only fix
devd, but any C++ program using libstdc++.
MFC after: 3 days
X-MFC-With: r263694
well over 8 years...
roll the clock forward 16 years since there have been other changes
deserving of a bump, but never happened..
Submitted by: feld
Obtained from: 1 week
though it works w/o it for some reason, contrary to our reading of
make(1)). Also add a comment explaining things a bit better so there's
one less mystery that must be answered with svn blame.
Submitted by: ian@
