Promoting base pages to superpages can increase TLB coverage and allow for
efficient use of page table entries. This development provides FreeBSD/ARM
with superpages management mechanism roughly equivalent to what we have for
i386 and amd64 architectures.
1. Add mechanism for automatic promotion of 4KB page mappings to 1MB section
mappings (and demotion when not needed, respectively).
2. Managed and non-kernel mappings are now superpages-aware.
3. The functionality can be enabled by setting "vm.pmap.sp_enabled" tunable to
a non-zero value (either in loader.conf or by modifying "sp_enabled"
variable in pmap-v6.c file). By default, automatic promotion is currently
disabled.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
This allows for enabling and configuring superpages reservation mechanism in
order to allocate and populate 256 4KB base pages (for the purpose of
promotion to a 1MB superpage).
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
terminology).
Adds command "mfiutil syspd <drive#>" to change a drive to SYSPD. Drive
will then be scanned/reported immediately as /dev/mfisyspdX by the host.
"mfiutil good <drive#>" clears SYSPD mode, remove /dev/mfisyspdX and
sets disk into UNCONFIGURED mode.
Tested on Dell H310 SAS/SATA RAID controller.
MFC after: 2 weeks
Sponsored by: Yahoo! Inc.
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.
Tested by: gnn, hiren
MFC after: 1 month
The FFLAGS and OFLAGS now work correctly also for files opened with O_EXEC.
Except possibly fuse, the other users pass values without O_EXEC set. fuse
appears to assume O_EXEC is handled correctly.
Although F_SETFL may not be commonly used for execute-only file descriptors,
F_GETFL may be useful to find the access mode.
This driver is based on Linux 3.8 and a previous effort by kan@.
More informations about this project can be found on the FreeBSD wiki:
https://wiki.freebsd.org/AMD_GPU
The driver is split into:
sys/dev/drm2:
The driver sources.
sys/modules/drm2/radeonkmw:
The driver main kernel module's Makefile.
sys/modules/drm2/radeonkmsfw:
All firmware kernel module Makefiles. There's one directory and one
Makefile for each firmware.
sys/contrib/dev/drm2/radeonkmsfw:
All firmware binary sources.
tools/tools/drm/radeon
Tools to update firmwares or regenerate some headers.
Merging the driver to FreeBSD 9.x may be possible but not a priority for
now.
Help from: kib@, kan@
Tested by: avg@, kwm@, ray@,
Alexander Yerenkow <yerenkow@gmail.com>,
Anders Bolt-Evensen <andersbo87@me.com>,
Denis Djubajlo <stdedjub@googlemail.com>,
J.R. Oldroyd <fbsd@opal.com>,
Mikaël Urankar <mikael.urankar@gmail.com>,
Pierre-Emmanuel Pédron <pepcitron@gmail.com>,
Sam Fourman Jr. <sfourman@gmail.com>,
Wade <wade-is-great@live.com>,
(probably other I forgot...)
HW donations: kyzh, Yakaz
Here are two new functions to map and unmap the Video BIOS:
void * vga_pci_map_bios(device_t dev, size_t *size);
void vga_pci_unmap_bios(device_t dev, void *bios);
The BIOS is either taken from the shadow copy made by the System BIOS at
boot time if the given device was used for the default display (i386,
amd64 and ia64 only), or from the PCI expansion ROM.
Additionally, one can determine if a given device was the default
display at boot time using the following new function:
void vga_pci_unmap_bios(device_t dev, void *bios);
Add a new ttm_bo_release_mmap() function to unmap pages in a
vm_object_t. Pages are freed when the buffer object is later released.
This function is called in ttm_bo_unmap_virtual_locked(), replacing
Linux' unmap_mapping_range(). In particular this is called when a buffer
object is about to be moved, so that its mapping is invalidated.
However, we don't use this function in ttm_bo_vm_dtor(), because the
vm_object_t is already marked as OBJ_DEAD and the pages will be
unmapped.
Approved by: kib@
This fixes a crash where a SIGLALRM, heavily used by X.Org, would
interrupt the wait, causing the page fault to fail and the "Xorg"
process to receive a SIGSEGV.
Approved by: kib@
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jan 14 15:08:14 2013 +0100
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
This fixes up
commit e8e89622ed361c46bf90ba4828e685a8b603f7e5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 18 22:25:11 2012 +0100
drm/ttm: fix fence locking in ttm_buffer_object_transfer
which leaves behind a might_sleep in atomic context, since the
fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix
is to revert the above commit and only take the lock where we need it,
around the call to ->sync_obj_ref.
v2: Fixup things noticed by Maarten Lankhorst:
- Brown paper bag locking bug.
- No need for kzalloc if we clear the entire thing on the next line.
- check for bo->sync_obj (totally unlikely race, but still someone
else could have snuck in) and clear fbo->sync_obj if it's cleared
already.
Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Approved by: kib@
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Jan 16 15:58:34 2013 +1000
ttm: on move memory failure don't leave a node dangling
if we have a move notify callback, when moving fails, we call move notify
the opposite way around, however this ends up with *mem containing the mm_node
from the bo, which means we double free it. This is a follow on to the previous
fix.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Approved by: kib@
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Jan 16 14:25:44 2013 +1000
ttm: don't destroy old mm_node on memcpy failure
When we are using memcpy to move objects around, and we fail to memcpy
due to lack of memory to populate or failure to finish the copy, we don't
want to destroy the mm_node that has been copied into old_copy.
While working on a new kms driver that uses memcpy, if I overallocated bo's
up to the memory limits, and eviction failed, then machine would oops soon
after due to having an active bo with an already freed drm_mm embedded in it,
freeing it a second time didn't end well.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Approved by: kib@
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jan 15 14:57:28 2013 +0100
drm/ttm: unexport ttm_bo_wait_unreserved
All legitimate users of this function outside ttm_bo.c are gone, now
it's only an implementation detail.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Approved by: kib@
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jan 15 14:57:10 2013 +0100
drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
This requires re-use of the seqno, which increases fairness slightly.
Instead of spinning with a new seqno every time we keep the current one,
but still drop all other reservations we hold. Only when we succeed,
we try to get back our other reservations again.
This should increase fairness slightly as well.
Changes since v1:
- Increase val_seq before calling ttm_bo_reserve_slowpath_nolru and
retrying to take all entries to prevent a race.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Approved by: kib@
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jan 15 14:57:05 2013 +0100
drm/ttm: add ttm_bo_reserve_slowpath
Instead of dropping everything, waiting for the bo to be unreserved
and trying over, a better strategy would be to do a blocking wait.
This can be mapped a lot better to a mutex_lock-like call.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Approved by: kib@
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jan 15 14:56:48 2013 +0100
drm/ttm: cleanup ttm_eu_reserve_buffers handling
With the lru lock no longer required for protecting reservations we
can just do a ttm_bo_reserve_nolru on -EBUSY, and handle all errors
in a single path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Author: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Date: Tue Jan 15 14:56:37 2013 +0100
drm/ttm: remove lru_lock around ttm_bo_reserve
There should no longer be assumptions that reserve will always succeed
with the lru lock held, so we can safely break the whole atomic
reserve/lru thing. As a bonus this fixes most lockdep annotations for
reservations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Some of the FreeBSD-specific definitions are moved to drm_os_freebsd.h.
But there's still work to do to clean it up and reduce the diff with
Linux' drmP.h.
The SDM (June 2013) tables on these are rather confusing. Yes, they
assign the same name (BR_MISP_RETIRED.ALL_BRANCHES) to two codes
(C5H/00H and C5H/04H.) The latter however is the PEBS version.
So, to make it easier to see the difference - and yes, we can use
both without having to actually enable the PEBS specific bits! -
just rename the PEBS one to _PS so there's no clashing.
Tested:
* Sandy bridge
