This check eliminates infinite loop of MTU change / link flap / lease verification / MTU change / link flap etc.
in case of some NIC drivers like em(4) or igb(4).
N.B.: obsolete u_int16_t is used in consistency with the rest of the file.
PR: 229432
Approved by: mav (mentor)
MFC after: 1 week
The bhyve(8) exit status indicates how the VM was terminated:
0 rebooted
1 powered off
2 halted
3 triple fault
The problem is when we have wrappers around bhyve that parses the exit
error code and gets an exit(1) for an error but interprets it as "powered off".
So to mitigate this issue and makes it less error prone for third part
applications, I have added a new exit code 4 that is "exited due to an error".
For now the bhyve(8) exit status are:
0 rebooted
1 powered off
2 halted
3 triple fault
4 exited due to an error
Reviewed by: @jhb
MFC after: 2 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D16161
Summary:
Add the device id of the Panda Wireless PAU06 which seems to be
the already-supported combination of RT5392 MAC and RF RT5372
radio.
Reviewed By: allanjude, eadler, jhb
Approved By: jhb
Differential Revision: https://reviews.freebsd.org/D16211
As the comment says, ifdetach might be called during the course of driver
detach if initialization failed. This shouldn't be a total failure, though,
we just have nothing to do there.
This has been modified slightly from Augustin's original commit to move the
bail-out slightly earlier since the ic wouldn't have been added to the
ic list in the first place, and a comment has been added describing when
this might be an issue.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com>
Obtained from: Haiku (e6f6c1b4633532a8ad37c803dc7c65601e5b24ba)
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.
Noted and reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16142
(r334844). Most of the changes involve moving some code around to
reduce conflicts with future merges. One of the missing changes
included a notification on scrub cancellation.
Approved by: mav
Sponsored by: iXsystems Inc
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds a "-f" option to pnfsdskill(8) that
uses the kernel changes made by r336141 to implement this "forced" case
of disabling a DS.
This patch only affects the pNFS server.
For example, fully construct the new PTE before entering the critical
section. This change is a stepping stone to psind == 1 support on i386.
Reviewed by: kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16188
No valid FreeBSD binary very called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
This is a respin of r335983 with a workaround for the ancient BFD linker
in the libc stubs.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16193
to be displayed when make is called with -s. Replace it by ${ECHO}.
Reviewed by: brd, bdrewery
Approved by: brd, bdrewery
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D16195
sysctl interface. This is similar to the TCP host cache.
Reviewed by: pkelsey@, kbowling@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D14554
When a client receives a SYN-ACK segment with a TFP fast open cookie,
but without an MSS option, an MSS value from uninitialised stack memory is used.
This patch ensures that in case no MSS option is included in the SYN-ACK,
the appropriate value as given in RFC 7413 is used.
Reviewed by: kbowling@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16175
Encoding-specific processing introduced in r335836 is not recommended.
And doing getenv("LANG") and assuming an encoding based on it is a
very bad practice to internationalize software.
Submitted by: hrs
Differential Revision: https://reviews.freebsd.org/D16203
This is possible because, well, they're static. Both the dynamic environment
and the MD-environment (generally loader(8) environment) can potentially
have room for new variables to be set, and thus do not receive this
treatment.
r336020 introduced pcpu_page_alloc(), replacing page_alloc() as the
backend allocator for PCPU UMA zones. Unlike page_alloc(), it does
not honour malloc(9) flags such as M_ZERO or M_NODUMP, so fix that.
r336020 also changed counter(9) to initialize each counter using a
CPU_FOREACH() loop instead of an SMP rendezvous. Before SI_SUB_CPU,
smp_rendezvous() will only execute the callback on the current CPU
(i.e., CPU 0), so only one counter gets zeroed. The rest are zeroed
by virtue of the fact that UMA gratuitously zeroes slabs when importing
them into a zone.
Prior to SI_SUB_CPU, all_cpus is clear, so with r336020 we weren't
zeroing vm_cnt counters during boot: the CPU_FOREACH() loop had no
effect, and pcpu_page_alloc() didn't honour M_ZERO. Fix this by
iterating over the full range of CPU IDs when zeroing counters,
ignoring whether the corresponding bits in all_cpus are set.
Reported and tested by: pho (previous version)
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D16190
RB_ASKNAME is no longer instructions to the boot loader to request a
prompt for which kernel to boot. Instead, it asks for what the root
file system to use. RB_INITNAME is unused, and never has been in
FreeBSD as far as I can tell. Remove it from the documentation and fix
comment. RB_SELFTEST and RB_MINIROOT likewise (though they were
completely undocumented). These last three constants can likely just
be deleted as nothing references them (even to set useless bits).
RB_ASKNAME doesn't actually survive reboot, however, so needs to be
communicated to the bootloader via other means. If the bootloader sets
it, though, it will be honored.
* FreeBSD stores addresses in 8 bit format, but the OPAL API requires the 7-bit
address, and encodes the direction elsewhere. Behave like other i2c drivers,
and shift accordingly.
* The OPAL API can already handle multiple requests in flight. Change the async
token to be private to the thread, so as not to stomp across i2c accesses,
remove the limitation error message, and use the correct message index to
transfer all messages in the list.
* Micro-optimize the async handler to not continuously call pmap_kextract() when
spin-waiting for the operation to complete.
This has been tested by hexdumping an EEPROM attached via the icee(4) driver.
Apparently some tools are not able to determine if all the cases of a
switch are covered. Make use of the attribute for cases like this.
Hinted by: DragonFlyBSD GGC8 (but fixed differently)
CID: 976552
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds the kernel code needed by pnfsdskill(8)
to implement this "forced" case of disabling a DS.
This patch only affects the pNFS server.
A quick test of this shows multiple problems. Rather than fix the
problems, just retire this board's support. It's for a 12 year old
board that's been out of production for at least 7 years and generally
lacks the memory to run even a stripped down NanoBSD image well. It's
not really relevant anymore.
"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.
Submitted by: lev
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D1776
Add generic function if_tunnel_check_nesting() that does check for
allowed nesting level for tunneling interfaces and also does loop
detection. Use it in gif(4), gre(4) and me(4) interfaces.
Differential Revision: https://reviews.freebsd.org/D16162
