that it uses the same ctype maps and functions as other UTF-8 locales.
Reviewed by: bapt, cem, eadler
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17833
There is no need to check if capdns is NULL.
If we will build the system without casper all cap_gethostaddr will be
replaced by the standard functions.
Please notice that we still don't clean information in nvlist structures.
Submitted by: David CARLIER <devnexen@gmail.com>
Differential Revision: https://reviews.freebsd.org/D16777
The getaddrinfo(3) and gethostbyname(3) are used to return the address for a
given hostname. The getnameinfo(3) and gethostbyaddr(3) are used to return
hostname for a given address. Right now in casper, we have two limitations:
- NAME which allows resolving DNS names.
- ADDR which allows to do revert DNS lookups.
Before this change the rights was mixed up:
NAME - getnameinfo(3) and gethostbyname(3)
ADDR - gethostbyaddr(3) and getaddrinfo(3)
Which no matters on limitation allowed us to resolve DNS names and do DNS
lookups basically by using a different set of functions.
Now the NAME type allows getaddrinfo(3) and gethostbyname (3)functions,
and the ADDR names allow to use gethostbyaddr(3) and getnameinfo(3) functions.
Reviewed by: pjd, bcr
MFC after: 3 weeks
Discussed with: hrs
Differential Revision: https://reviews.freebsd.org/D16930
Previously the combination of relro (implicit), -z now and ifunc use
resulted in a segfault when applying ifuncs after relro (test binary
here just calls amd64_get_fsbase()):
| % env LD_DEBUG=1 libexec/rtld-elf/obj/ld-elf.so.1 a.out
| ...
| enforcing main obj relro
| ...
| resolving ifuncs
| reloc_jmpslot: *0x203198 = 0x189368ea4570
| zsh: bus error (core dumped) LD_DEBUG=1 obj/ld-elf.so.1 ~/a.out
Reported by: Shawn Webb
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Existing base causes conflicts for direct execution of ld-elf.so.1
because default linking base for non-PIE binaries is 0x10000.
Reported and tested by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.
A set of new sysctl(8) added to control this ability or disable it:
net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.
net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.
MFC after: 1 month
The writeRandomBytes_arc4random is not used if the arc4random_buf
is available. This caused compiler to throw warnings which are treated as
an error in libexpact.
Approved by: vangyzen
You should not be using DES. You should not have been using DES for the
past 30 years.
The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself. In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).
Some general approaches ed(1) users might consider to replace the removed
DES mode:
1. Full disk encryption with something like AES-XTS. This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest. Like CBC, it lacks tampering protection. Examples include
GELI, LUKS, FileVault2.
2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).
3. Native encryption at the filesystem layer. Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.
4. Storing your files unencrypted. It's not like DES was doing you much
good.
If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:
openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>
Reviewed by: allanjude, bapt, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17829
The idea behind those functions is not to force consumers to remember that there
is a need to check errno on failure. We already have a caph_enter(3) function
which does the same for cap_enter(2).
MFC after: 2 weeks
We already allow to use poll(2). There is no reason to disallow ppoll(2).
PR: 232495
Submitted by: Stefan Grundmann <sg2342@googlemail.com>
Reviewed by: cem, oshogbo
MFC after: 2 weeks
While here, use LANG as the proper source to select man pages language/encoding,
falling back to LC_CTYPE.
Reviewed by: bapt
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17835
Update contrib/expat by merging from the vendor branch.
Update expat_config.h manually, using
make -C /usr/ports/textproc/expat2 configure
as a baseline.
MFC after: 1 month
Relnotes: yes
Security: yes; see contrib/expat/Changes since 2.2.0
Sponsored by: Dell EMC Isilon
Factorize code by using struct sockaddr_storage to handle both ipv6 and ipv4
Discussed with: rmacklem
Reviewed by: manu
MFC after: 1 month
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D13223
Make it clear that ipfw action set for layer2 frames it a bit limited.
PR: 59835
Reviewed by: yuripv
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17719
It is unused after r340102, and more important, I do not see how to
define textsize in both practically useful and correct way, for binaries
with more that one executable segments.
Sponsored by: The FreeBSD Foundation
Do not use textsize and do not flush everything between map base and
base + textsize, because unmapped areas cannot be flushed.
This makes Obj_Entry textsize only use go away, and I will remove it
later.
Reported by: tuexen
Tested by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: The FreeBSD Foundation
The buffer is already zeroed in compile_rule() function, and also it
may contain configured F_NOT flag in o.len field. This fixes the filling
for "not icmp6types" opcode.
PR: 232939
MFC after: 3 days
These are built with the host toolchain which may not support retpoline.
While here, move the MK_ overrides to a separate line and sort them
alphabetically to support future changes.
MFC with: r339511
Sponsored by: The FreeBSD Foundation
Having the flag named "6" can possibly be a problem for configurations
where parsing strings and numbers can produce ambivalent results.
Rename the "6" flag to the "S"ix (or Silence-IPv4) flag.
In discussing D17503 "Run epoch calls sooner and more reliably" with
sbahra@ we came to the conclusion that epoch is currently misusing the
ck_epoch API. It isn't safe to do a "write side" operation (ck_epoch_call
or ck_epoch_poll) in the middle of a "read side" section. Since, by definition,
it's possible to be preempted during the middle of an EPOCH_PREEMPT
epoch the GC task might call ck_epoch_poll or another thread might call
ck_epoch_call on the same section. The right solution is ultimately to change
the way that ck_epoch works for this use case. However, as a stopgap for
12 we agreed to simply have separate records for each use case.
Tested by: pho@
MFC after: 3 days
Replication code in receive_object() falsely assumes that if received
object block size is different from local, then it must be a new object
and calls dmu_object_reclaim() to wipe it out. In most cases it is not a
problem, since all dnode, bonus buffer and data block(s) are immediately
rewritten any way, but the problem is that spill block (if used) is not.
This means loss of ACLs, extended attributes, etc.
This issue can be triggered in very simple way:
1. create 4KB file with 10+ ACL entries;
2. take snapshot and send it to different dataset;
3. append another 4KB to the file;
4. take another snapshot and send incrementally;
5. witness ACL loss on receive side.
PR: 198457
Discussed with: mahrens
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
r235274 added a sort regression test (it operates by comparing output
against GNU sort). The commit included a number of 0-byte files, one
of which ends in a trailing . which reportedly breaks svn/git checkouts
on Windows.
It appears these were added accidentally, so just remove them.
PR: 232479
MFC after: 1 month
As part of Chuck's work on fixing kernel crashes caused by disk I/O
errors, it is useful to be able to trigger various kinds of
errors. This patch allows causing an AHCI-attached disk to disappear,
by having the driver keep the PHY disabled when the driver would
otherwise enable the PHY. It also allows making the disk reappear by
having the driver go back to setting the PHY enable/disable state as
it normal would and simulating the hardware event that causes a bus
rescan.
Submitted by: Chuck Silvers
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D16043
This fixes signed IOCTL value warnings in uhsoctl().
MFC after: 1 week
Submitted by: Marcin Cieslak <saper@saper.info>
Sponsored by: Mellanox Technologies
tcpdump can capture packet traces from the usb bus. usbus[0-9] are
registered as ifnet devices so this can work. When these devices come
up, devd was trying to run pccard_ether on those interfaces, which
didn't exist and generated an error.
Assuming that any output from `git diff-index --name-only` implies
changes in the working tree results in false positives: files with
metadata, but not content, changes are also listed.
Check that content differences exist before adding the -dirty tag to
the git hash.
PR: 229230
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15968
These arguments are mostly paths handled by NAMEI*() macros which already
take const char * arguments.
This change improves the match between syscalls.master and the public
declerations of system calls.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17812
Although _M is reserved for use by the implemenation it is rather non-
descriptive and conflicted with a libc++ test. Just rename to _Major
and _Minor to avoid conflicts.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16734
