I've been holding back on this because 1.7.0 requires OpenSSL 1.1.0 or
newer for full DANE support. But we can't wait forever, and nothing in
base uses DANE anyway, so here we go.
is executed on the right stack already. No copy from the entry stack
to the kstack must be performed for vm86 bios call code to function.
To access the pcb flags on kernel entry, unconditionally switch to
kernel address space if vm86 mode is detected.
This fixes very early vm86 bios calls, typically done when boot is
performed by boot2 without loader, and kernel falls back to BIOS calls
to get SMAP.
Reported by: bde
Sponsored by: The FreeBSD Foundation
PCB_VM86CALL pcb flag not set should be treated same as return to
userspace.
Most important, the address space must be switched. This fixes
usermode vm86 operations after the 4/4 split.
Sponsored by: The FreeBSD Foundation
exception code is copied to the trampoline.
The correct value is then copied to trampoline automatically, so
tramp_idleptd_reloced can be eliminated.
This will allow to use the same exception entry code to handle traps
from vm86 bios calls on early boot stage, as after the trampoline is
configured.
Sponsored by: The FreeBSD Foundation
Record common_tssd, the descriptor to be written in GDT to point to
the common TSS, before LTR is executed. The LTR instruction sets the
loaded descriptor type to 386 TSS busy, which traps on reloads.
Sponsored by: The FreeBSD Foundation
The profile for send(2)/recv(2) observation has been refactored to
eliminate alloca() in favor of translations available in HEAD.
Sponsored by: Smule, Inc.
Knowing the value of execname during these probes is of some value even
if it is commonly the interrupt kernel thread (intr[12]) -- quite often
it is not, but that depends on the probe.
Sponsored by: Smule, Inc.
A module that wishes to post-process the output needs to know which
arguments were passed in order to re-execute a child in a pipe-chain.
Further, the expansion of ARGV needs to be such that items are escaped
properly.
Sponsored by: Smule, Inc.
If you were to pass an invalid option after `-B num' or `-K num' you
would see that the usage statement would show the value you passed
instead of the actual default.
Moving the default values to separate variables that are unaffected
by the options-parsing allows the usage statement to correctly show
the hard-coded default values if no flags are used.
Sponsored by: Smule, Inc.
A return statement should have been an exit in list_profiles().
If the user passed `-Q' to list profiles and asked for one-line
per profile (`-1'), list_profiles() would not exit as should.
Sponsored by: Smule, Inc.
On non-trivial SMP systems the contention on the pmc_owner mutex leads
to a substantial number of samples captured being from the pmc process
itself. This change a) makes buffers larger to avoid contention on the
global list b) makes the working sample buffer per cpu.
Run pmcstat in the background (default event rate of 64k):
pmcstat -S UNHALTED_CORE_CYCLES -O /dev/null sleep 600 &
Before:
make -j96 buildkernel -s >&/dev/null 3336.68s user 24684.10s system 7442% cpu 6:16.50 total
After:
make -j96 buildkernel -s >&/dev/null 2697.82s user 1347.35s system 6058% cpu 1:06.77 total
For more realistic overhead measurement set the sample rate for ~2khz
on a 2.1Ghz processor:
pmcstat -n 1050000 -S UNHALTED_CORE_CYCLES -O /dev/null sleep 6000 &
Collecting 10 samples of `make -j96 buildkernel` from each:
x before
+ after
real time:
N Min Max Median Avg Stddev
x 10 76.4 127.62 84.845 88.577 15.100031
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
-28.398 +/- 10.0344
-32.0602% +/- 7.69825%
(Student's t, pooled s = 10.6794)
system time:
N Min Max Median Avg Stddev
x 10 2277.96 6948.53 2949.47 3341.492 1385.2677
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
-2277.47 +/- 920.425
-68.1574% +/- 8.77623%
(Student's t, pooled s = 979.596)
x no pmc
+ pmc running
real time:
HEAD:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 76.4 127.62 84.845 88.577 15.100031
Difference at 95.0% confidence
29.73 +/- 10.0335
50.5208% +/- 17.0525%
(Student's t, pooled s = 10.6785)
patched:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
1.332 +/- 0.248939
2.2635% +/- 0.426506%
(Student's t, pooled s = 0.264942)
system time:
HEAD:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 2277.96 6948.53 2949.47 3341.492 1385.2677
Difference at 95.0% confidence
2309.97 +/- 920.443
223.937% +/- 89.3039%
(Student's t, pooled s = 979.616)
patched:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
32.493 +/- 16.0042
3.15% +/- 1.5794%
(Student's t, pooled s = 17.0331)
Reviewed by: jeff@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15155
The Linux client now uses the TestStateID operation, so this patch adds
support for it to the NFSv4.1 server. The FreeBSD client never uses this
operation, so it should not be affected.
MFC after: 2 months
r333175 updated the join_group functions, but not the leave_group ones.
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15393
Part 3 of many ...
The VPC framework relies heavily on cloning pseudo interfaces
(vmnics, vpc switch, vcpswitch port, hostif, vxlan if, etc).
This pulls in that piece. Some ancillary changes get pulled
in as a side effect.
Reviewed by: shurd@
Approved by: sbruno@
Sponsored by: Joyent, Inc.
Differential Revision: https://reviews.freebsd.org/D15347
The mld6query command relies on KAME behaviour which allows the
ipv6mr_multiaddr member of the request object in a IPV6_JOIN_GROUP
setsockopt() call to be INADDR6_ANY. The FreeBSD stack doesn't allow
this, so mld6query has been non-functional.
Also, add a -g option which sends a General Query (query INADDR6_ANY)
Reviewed by: sbruno, mmacy
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15384
This hardware isn't totally ancient, about equal to a mxge(4) or mlx4en(4),
but the company was sold to Exar which then promptly exited the Ethernet
business so the card was commercially available for under 2 years. On deep
search, the only usage of these cards I found was by the importing of the
driver. There are code quality issues identified by Brooks and Hiren and
no visible use nor maintainership that warrant removal from FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: gnn brooks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15363
It is guaranteed that if_ipsec(4) interface is used only for tunnel
mode IPsec, i.e. decrypted and decapsultaed packet has its own IP header.
Thus we can consider it as new packet and clear the protocols flags.
This allows ICMP/ICMPv6 properly handle errors that may cause this packet.
PR: 228108
MFC after: 1 week
- Use Fx when referring to FreeBSD.
- Use Ql instead of Cm for command invocations.
- Remove some redundant Pp macros.
- Use a literal indented Bd instead of a series of Dl macros.
Submitted by: 0mp@
Reviewed by: eadler@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15126
the /boot/kernel/linker.hints file, which breaks loading some of the modules
with dependencies, eg cfiscsi.ko.
This is a minimal fix for ARM images, in order to safely MFC it before
11.2-RELEASE. Afterwards, however, I believe we should actually just change
the default (as in, etc/defaults/rc.conf). The reason is that it's required
for every image that's being cross-built, as kldxref(1) cannot handle files
for non-native architectures. For the one that is not - amd64 - having it
on by default doesn't change anything - the script is noop if the linker.hints
already exists.
The long-term solution would be to rewrite kldxref(1) to handle other
architectures, and generate linker.hints at build time.
Reviewed by: gjb@
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14534
sys/dev/ocs/ocs_os.c:
In ocs_thread_create(), use sizeof(*thread) (instead of
sizeof(thread)) as the size argument to memset so that we clear
out the entire thread structure instead of just a few bytes of it.
Submitted by: jtl
MFC after: 3 days
contain any kernel modules. This makes the common case completely silent,
as it should be.
Reviewed by: imp@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14694
LAN7800 USB 3.1 to 10/100/1000 Ethernet with PHY
LAN7801 USB 3.1 to 10/100/1000 Ethernet with RGMII interface
Also update manufacturer name for the Vendor ID. Microchip acquired
SMSC in May 2012.
Sponsored by: The FreeBSD Foundation
Previously gpart's man page listed some command options in prose, and
some in table form, which made it more difficult to use as a reference.
Reviewed by: bcr
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15135
Alphabetical order, uppercase before lowercase for each letter and with
no regard to whether an option takes an argument.
Sponsored by: The FreeBSD Foundation
This aligns the section itself compared to other sections, does not change
internal alignment of fields stored inside. This may or may not come later.
The motivation is partially combating adverse effects of the adjacent cache
line prefetcher. Without the annotation part of read_mostly section was on
the line of fire.
- initialize the pcpu STAILQ in the NUMA case
- don't enqueue the callback task if there isn't sufficient work to be done
Reported by: pho@
Approved by: sbruno@
Current UMA internals are not suited for efficient operation in
multi-socket environments. In particular there is very common use of
MAXCPU arrays and other fields which are not always properly aligned and
are not local for target threads (apart from the first node of course).
Turns out the existing UMA_ALIGN macro can be used to mostly work around
the problem until the code get fixed. The current setting of 64 bytes
runs into trouble when adjacent cache line prefetcher gets to work.
An example 128-way benchmark doing a lot of malloc/frees has the following
instruction samples:
before:
kernel`lf_advlockasync+0x43b 32940
kernel`malloc+0xe5 42380
kernel`bzero+0x19 47798
kernel`spinlock_exit+0x26 60423
kernel`0xffffffff80 78238
0x0 136947
kernel`uma_zfree_arg+0x46 159594
kernel`uma_zalloc_arg+0x672 180556
kernel`uma_zfree_arg+0x2a 459923
kernel`uma_zalloc_arg+0x5ec 489910
after:
kernel`bzero+0xd 46115
kernel`lf_advlockasync+0x25f 46134
kernel`lf_advlockasync+0x38a 49078
kernel`fget_unlocked+0xd1 49942
kernel`lf_advlockasync+0x43b 55392
kernel`copyin+0x4a 56963
kernel`bzero+0x19 81983
kernel`spinlock_exit+0x26 91889
kernel`0xffffffff80 136357
0x0 239424
See the review for more details.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D15346
if_bridge has a lot of limitations that make it scale poorly to higher data
rates. In my projects/VPC branch I leverage the bridge interface between
layers for my high speed soft switch as well as for purposes of stacking
in general.
Reviewed by: sbruno@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15344
- Lend priority to preempted threads in epoch_wait to handle the case
in which we've had priority lent to us. Previously we borrowed the
priority of the lowest priority preempted thread. (pointed out by mjg@)
- Don't attempt allocate memory per-domain on powerpc, we don't currently
handle empty sockets (as is the case on jhibbits Talos' board).
- Handle deferred callbacks as pcpu lists and poll the lists periodically.
Currently the interval is 1/hz.
- Drop the thread lock when adaptive spinning. Holding the lock starves
other threads and can even lead to lockups.
- Keep a generation count pcpu so that we don't keep spining if a thread
has left and re-entered an epoch section.
- Actually removed the callback from the callback list so that we don't
double free. Sigh ...
Approved by: sbruno@
