659 Commits

Author SHA1 Message Date
nate
bc9e7efe61 Added character 21 to conf.c table for future ps/2 mouse driver. This
finishes the install of the device short of adding the driver itself to
i386/isa/psm.c
1993-10-26 22:25:20 +00:00
nate
fbbc42a492 Bad kludge to work around the alternative wd driver problems 1993-10-26 21:27:07 +00:00
nate
b2c114a921 Added alternative wd driver (called wx due to device name limitations)
This will be removed when a single driver that works on all hardware can
be verified
1993-10-26 21:26:19 +00:00
nate
c9630f19bd Added ps/2 mouse driver file to finish off what Jordan started before
The driver will have to come after it's probe routine has been written.
1993-10-26 21:24:34 +00:00
dg
c06d5da754 Yanked out the 8 'addb %al,%al' (0xc000)'s out of the start of the
program. The idea was that these are 'alignment' crap, but the image
is 16byte-aligned without these. Location 0 still doesn't have a 0,
but who cares, binaries wil be built with page zero unmapped in the
near future.
1993-10-26 09:04:13 +00:00
dg
b7669e96a3 Added support for QMAGIC format executable output. This causes the loader
to output the same QMAGIC format as BSDI does. This is triggered by
a new '-q' flag ('-Xlinker -q'  in gcc). The default can be changed from
ZMAGIC to QMAGIC by defining DEFAULT_MAGIC=QMAGIC when building ld.
1993-10-26 06:24:20 +00:00
rgrimes
9cbca60857 Reworked the search for suid sgid programs to be more like the original and
only to run find on local file systems.  It now works and no longer gets
the error from sort
1993-10-25 20:13:16 +00:00
rgrimes
c4f82d1e70 Redirect standard error onto standard out when call /etc/security so
that the errors from /etc/security are in the mail message from
/etc/security and not the /etc/daily mail message.  Now just to fix
the bug in /etc/security
1993-10-25 06:10:42 +00:00
jkh
313b638950 From: Amancio Hasty Jr <hasty@netcom.com>
Make sure calls to gus_voice_irq() are protected from interrupts.
1993-10-24 19:38:06 +00:00
paul
b9f46ecfd6 Removed #define ISDEBUG from top of file, should be config option
to get debugging code compiled in.

Moved bpfilter.h out of ifdef'd code so it can be seen.
1993-10-24 04:42:32 +00:00
paul
70dfbc0e44 Moved allocation of memory into is_attach so that malloc gets
called once when card is attached. Solved problem with driver
getting hosed when a reset takes place.

Removed init_block array -- now part of malloced memory. No more
static declarations left.

Added code so that debug ioctl actually does something.
ifconfig is0 debug will now switch on debugging code.

Other general cleanups.
1993-10-24 04:27:00 +00:00
jkh
4fb0b7a27f Needed to bump symtab space even more (to 102452). 1993-10-23 22:55:43 +00:00
jkh
4b07614ec4 Moved sound drivers from major 21 to major 30. 1993-10-23 22:24:35 +00:00
jkh
146223428e Enable mpu401 driver. 1993-10-23 22:21:00 +00:00
jkh
58acebbd89 Enabled all sound drivers by default. 1993-10-23 22:20:47 +00:00
jkh
abc78b3565 Fixed up to at least compile (can't test) properly for FreeBSD 1993-10-23 22:13:42 +00:00
jkh
efbf1dafe4 Moved sound driver from major 21 to major 30 1993-10-23 22:13:08 +00:00
jkh
1383b9ccfe Removed comments from LINT file, left small example for SoundBlaster
in its place and moved commentary into /sys/i386/doc/sound.doc
1993-10-23 21:21:52 +00:00
jkh
28cd21a9ba Made kernel printf's more closely follow standard BSD convention. 1993-10-23 21:11:49 +00:00
rgrimes
05897fbde5 Put the sound stuff in alpabetic order. 1993-10-23 20:31:17 +00:00
jkh
b5012e4cab New snd*) target for making driver entries for new sound driver. 1993-10-23 10:58:51 +00:00
jkh
6fff94e5f0 This is the Linux generic soundcard driver, version 1.0c. Supports
SBlaster/Adlib/ProAudio Spectrum/Gravis/etc cards.  This is a BETA test
driver, please test it and get back to me!
1993-10-23 10:55:52 +00:00
jkh
47553b3ec6 Soundcard driver include file (/usr/include/machine/soundcard.h) 1993-10-23 10:50:21 +00:00
jkh
bc10e75fdd New soundcard driver at major device 21 1993-10-23 10:49:24 +00:00
jkh
9019e3218e Add config + files information for new Linux soundcard driver 1993-10-23 10:49:01 +00:00
nate
5c4f191c39 Removed un-necessary dependencies for assym.s 1993-10-23 08:28:17 +00:00
nate
d4033edb0b Reverted back to older version of ./genassym, instead of ./genassym.o
since make depend wasn't picking up any new dependencies.  However, due
to a bug in the old code, the original dependencies weren't being used, so
this version is better than the original and the lastest version.
(And is more readable as well)
1993-10-23 06:46:24 +00:00
dg
788f37f770 * Revision 2.11 1993/10/23 04:21:03 davidg
* Novell probe changed to be invasive because of too many complaints
 * about some clone boards not being reset properly and thus not
 * found on a warmboot. Yuck.
 *
 * Revision 2.10  1993/10/23  04:07:12  davidg
 * increment output errors if the device times out (done via watchdog)
 *
 * Revision 2.9  1993/10/23  04:01:45  davidg
 * increment input error counter if a packet with a bad length is
 * detected.
1993-10-23 04:52:41 +00:00
dg
f2d92ac771 From Andrew Chernov:
(see changes to getty which this patch is part of)

Basically, a few of the tty flags were changed to work better with
'CRT's, and the flags are better documented (documentation from Bruce
Evans).
1993-10-22 02:49:34 +00:00
rgrimes
e6583ac1c8 Change space to tab in ruserd line per Guido van Rooij 1993-10-21 17:34:32 +00:00
rgrimes
0a5248cdb5 Make whatisdb after the whole system is installed, since the one in
share/man will only create entries for manual pages that have been
installed up to that point.
1993-10-21 17:33:43 +00:00
rgrimes
2784706033 >From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
Date: Wed, 20 Oct 1993 18:28:44 +0300

Editors Note:
	Line ended with comma (``,'') instead of semicolon (``;''),
	this should not have effected the code.
	Submitter made no comments other than it was ``simple''.
1993-10-20 15:49:02 +00:00
rgrimes
345da9e5a0 Install mse man page, and create link for it 1993-10-19 20:20:33 +00:00
rgrimes
9ce0d322b5 Move the mse mouse man page to the man4.i386 directory 1993-10-19 20:19:15 +00:00
nate
0f7d6b2a33 Fixe a spelling error and added both the mse (logitech and ATI inport) and
the psm (PS/2 bus) mouse support

(The psm driver will have to come later)
1993-10-19 20:00:35 +00:00
rgrimes
cb844f9aa8 Make darn sure that fsck does not try to fsck dos file systems by setting
the fsck pass to 0, same thing for dump field, in the fstab that is
created by this script.
1993-10-19 19:58:55 +00:00
nate
da7778d34f Updated LINT to have the mse0 config line 1993-10-19 19:49:24 +00:00
nate
2d3f6b81db This is my patched version of a busmouse driver originally by Rick Macklem
(rick@snowhite.cis.uoguelph.ca).  I am currently using it with a Microsoft
InPort busmouse, under FreeBSD Epsilon.  I hadn't planned on supporting it,
but I have patched it a few times, and I guess this is now the de facto
reference version, so send me any problems or improvements.

                                                        - Gene Stark
                                                          stark@cs.sunysb.edu
                                                          October 9, 1993
1993-10-19 19:46:49 +00:00
rich
5e95a8816c merge free.c realloc.c into malloc.c so that all three are linked in
if any are referenced.

libc's malloc.o contains malloc(), free() and realloc().  And libc
refers to realloc which will cause the linker to pull in redundant
malloc() and free() definitions from malloc.o if it isn't already
linked in from GNU malloc.  Rich
1993-10-19 18:22:37 +00:00
rgrimes
62f301bbd6 Remove reference to EPSILON release. 1993-10-19 17:33:38 +00:00
rgrimes
22b3b00902 Add ie0 to standard kernels, this is the ATT starlan/ethernet driver
from Garrett Wollman.
1993-10-19 01:28:09 +00:00
paul
5ea28ffef0 Free malloc'ed memory when resetting card. 1993-10-18 22:48:48 +00:00
rgrimes
40db545ca5 Correct config line for ie0 per Garrett Wollman. 1993-10-18 22:46:58 +00:00
rgrimes
1126ae8500 Fix for version name in /etc/motd, now uses uname to get this information! 1993-10-18 19:08:36 +00:00
rgrimes
3463847114 >From: Julian Elischer <julian@jules.dialix.oz.au>
Date: Tue, 19 Oct 1993 02:22:41 -40962758 (WST)

As the subject line says:
I can;t believe this typo is still here.

Has NOBODY used the isa_dmastart() routine for 16bit DMA?

I know I just hit the dma regs directly for the AHA1542,
and it appears that either everybody else does as well, or
they only use 8bit DMA (e.g. floppy)

Editors Note:
	The definition of DMA2_CHN was incorrectly using IO_DMA1!
1993-10-18 18:45:48 +00:00
dg
805ad5a7aa Yank out Christoph Robitschko's hack for the hanging console problem as
it didn't actually fix it, and because starting the getty on /dev/console
instead of /dev/vga is a good work-around.
1993-10-18 14:21:48 +00:00
rgrimes
0ad470ab17 Change getty entry to start on /dev/console instead of /dev/vga, this fixes
the syslogd problem with consoles that do not respond after hupping syslogd.
1993-10-18 14:11:53 +00:00
jkh
1198436deb Patch from stever@csuohio.edu (Steve Ratliff) to make FAT_CURSOR work
on HDA/CGA displays.
1993-10-18 02:19:54 +00:00
paul
3c62cbe8ed Modified memory allocation to use malloc rather than a static array. 1993-10-17 22:22:46 +00:00
rgrimes
7b833e734d Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 19:17:18 +00:00