This is reworking the change in r296585 but to still properly install
the files. This limits the change to only the DIRDEPS_BUILD logic
for what it considers the name of the staging set, which is what the
cookie name is based off of.
Sponsored by: Dell EMC Isilon
MFC after: 1 week
The copy of contrib/libc-vis on ^/stable/10 doesn't contain all of the features
in the ^/stable/11 // ^/head version, including VIS_NOLOCALE. The risk is lower
in conditionally running the test instead of backporting the newer version of
libc-vis
MFC after: now
factor lives in /usr/games/, not /usr/bin, in NetBSD.
The correct way to handle this is do on-the-fly manipulation of the test
script via ATF_TESTS_SH_SED_<foo>, not by modify the pathing directly in
the test script.
This is being done to resolve an unnecessary conflict made when pulling
back ^/head@r309469 (contrib/netbsd-tests update) to ^/stable/10.
No functional change
MFC after: now
This is important in hostap, ibss, (11s at some magical future date, etc)
where different nodes may have smaller limits.
Oops!
MFC after: 1 week
Relnotes: Yes
* ic_freq is the centre of the primary channel, not the centre of the
HT40/HT80/etc channel. Add a method to access that.
* Add a method to access the centre of the primary channel, including
knowing the centre of the 5/10/20/40/80, versus the primary channel.
Ie, it's the centre of the 40, 80, 160MHz channel.
* Add a method to access the centre frequency of the secondary 80MHz
channel - we don't support VHT yet, but when we do.
* Add methods to access the current channel and the per-dev desired
channel. Ideally drivers that do full offload with a per-vap channel
configuration should use the vap channel, NOT ic_curchan.
Non-offload drivers that require net80211 to change the channel should
be accessing ic_curchan.
Changes were made to ZFS in the past year with respect to how ACLs
are handled, causing failures in this test. Mark it TODO so (hopefully)
someone more knowledgeable (like mav or trasz) will fix the code or the
test.
PR: 212323
The requirement is set via `atf_set "require.config" "allow_sysctl_side_effects"',
not `atf_set "require.config" "allow_sysctl_side_effects"'
X-MFC with: r308177
Pointyhat to: cmeyer
it.
Remove bogus wrappers and use the kernel defaults.
While here, use DEVMETHOD_END.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
Polish pthread_set_name_np(3) and add a .Xr to thr_set_name(2)
so the user might find the documentation for this behavior.
Reviewed by: jilles
MFC after: 3 days
Sponsored by: Dell EMC
Since the vnode is only expected to be shared locked, we can save a
little overhead by only pretending we are locking in the first place.
Reviewed by: kib
Tested by: pho
ps.paren_indents:
When ps.paren_level was 0, this was accessing paren_indents[-1].
in_buffer:
This fragment checks if "*/" was read, but there's no guarantee that there
is more than one byte in the array (actually, this happens frequently for
the "{" in things like "int main(void) {").
Submitted by: Piotr Stefaniak
When special else-if processing is enabled (-ei), we can assume "else if"
and "if" to be equivalent for indentation purposes.
This reduction saves a lot of stack space in case of a long "if-else-if
... else-if" sequence; with this change,
Postgres/src/bin/psql/tab-complete.c as of 9.6beta3
requires minimum of the stack length to be 31 instead of 444.
Submitted by: Piotr Sephaniak
being a bootstrap tool. However, for reproducible build output,
FreeBSD added dd status=none because it was otherwise difficult to
suppress the status information, but retain any errors that might
happen. There's no real reason that dd has to be a build tool, other
than we use status=none unconditional. Remove dd from a bootstrap tool
entirely by only using status=none when available. This may also help
efforts to build the system on non-FreeBSD hosts as well.
Differential Revision: https://reviews.freebsd.org/D8605
rtld-elf has some vestigial support for building as a static executable.
r45501 introduced a partial implementation with a prescient note that it
"might never be enabled." r153515 introduced ELF symbol versioning
support, and removed part of the unused build infrastructure for static
rtld.
GNU ld populates rela relocation addends and GOT entries with the same
values, and rtld's run-time dynamic executable check relied on this.
Alternate toolchains may not populate the GOT entries, which caused
RTLD_IS_DYNAMIC to return false. Simplify rtld by just removing the
unused check.
If we want to restore static rtld support later on we ought to introduce
a build-time #ifdef flag.
PR: 214972
Reviewed by: kan
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8687
- It should say 'read' in the I2CREAD section.
- last in the struct indicates the last command in a sequence, not the
reverse.
Reviewed by: imp
MFC after: 3 days
Sync libarchive with vendor.
Vendor bugfixes:
Fix for heap-buffer-overflow in archive_le16dec()
Fix for heap-buffer-overflow in uudecode_bidder_bid()
Reworked fix for compatibility with archives created by Perl Archive::Tar
MFC after: 1 week
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.
Discussed with: julian, glebius
MFC after: 2 weeks
Vendor bugfixes:
Fix for heap-buffer-overflow in archive_le16dec()
Fix for heap-buffer-overflow in uudecode_bidder_bid()
Reworked fix for compatibility with archives created by Perl Archive::Tar
When handling a GPE ACPI interrupt object the EcSpaceHandler()
function can be called which checks the EC_EVENT_SCI bit and then
recurse on the EcGpeQueryHandler() function. If there are multiple GPE
events pending the EC_EVENT_SCI bit will be set at the next call to
EcSpaceHandler() causing it to recurse again via the
EcGpeQueryHandler() function. This leads to a slow never ending
recursion during boot which prevents proper system startup, because
the EC_EVENT_SCI bit never gets cleared in this scenario.
The behaviour is reproducible with the ALASKA AMI in combination with
a newer Skylake based mainboard in the following way:
Enter BIOS and adjust the clock one hour forward. Save and exit the
BIOS. System fails to boot due to the above mentioned bug in
EcGpeQueryHandler() which was observed recursing multiple times.
This patch adds a simple recursion guard to the EcGpeQueryHandler()
function and also also adds logic to detect if new GPE events occurred
during the execution of EcGpeQueryHandler() and then loop on this
function instead of recursing.
Reviewed by: jhb
MFC after: 2 weeks
When a TCP segment with the FIN bit set was received in the CLOSED state,
a TCP RST-ACK-segment is sent. When computing SEG.ACK for this, the
FIN counts as one byte. This accounting was missing and is fixed by this
patch.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://svn.freebsd.org/base/head
Use after free happens for state that is deleted. The reference
count is what prevents the state from being freed. When the
state is dequeued, the reference count is dropped and the memory
freed. We can't dereference the next pointer or re-queue the
state.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8671
Teach indent(1) about storage-class specifiers. Don't assume
"in_parameter_declaration" state if "in_decl" hasn't been set. Don't set
"in_decl" for storage-class specifiers.
That set of changes helps with recognizing the difference between file
scope declarations like this:
static LIST_HEAD(, alq) ald_active;
static int ald_shuttingdown = 0;
struct thread *ald_thread;
and old style function declarators like this:
static int
do_execve(td, args, mac_p)
struct thread *td;
struct image_args *args;
struct mac *mac_p;
{
Unfortunately, at the same time this change makes indent(1) require
explicit int in declarations like "static a;", in order to understand that
it's part of a declaration. On the other hand, declarations like in the
first example are no longer indented as if ald_shuttingdown and ald_thread
were parameters of a function named LIST_HEAD.
Submitted by: Piotr Stefaniak
This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
drives, but is a SPC (SCSI Primary Commands) command, and may be found
on any device that speaks SCSI.
The new camcontrol timestamp subcommand allows getting the current device
time or setting the time to the current system time or any arbitrary time.
sbin/camcontrol/Makefile:
Add timestamp.c.
sbin/camcontrol/camcontrol.8:
Document the new timestamp subcommand.
sbin/camcontrol/camcontrol.c:
Add the timestamp subcommand to camcontrol.
sbin/camcontrol/camcontrol.h:
Add the timestamp() function prototype.
sbin/camcontrol/timestamp.c:
Timestamp setting and reporting functionality.
sys/cam/scsi/scsi_all.c:
Add two new CCB building functions, scsi_set_timestamp() and
scsi_report_timestamp(). Also, add a new helper function,
scsi_create_timestamp().
sys/cam/scsi/scsi_all.h:
Add CDB and parameter data for the the set and report timestamp
commands.
Add function declarations for the new CCB building and helper
functions.
Submitted by: Sam Klopsch
Sponsored by: Spectra Logic
MFC After: 2 weeks
This uses the same fix as r294894 did for the mlock test. The code from
that commit is moved into a common object file which PROGS supports
building first.
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8689
buf_ring contains an assert that checks whether an item being
enqueued already exists on the ring. There is a subtle bug in
this assert. An item can be returned by a peek() function and
freed, and then the consumer thread can be preempted before
calling advance(). If this happens the item appears to still be
on the queue, but another thread may allocate the item from the
free pool and wind up trying to enqueue it again, causing the
assert to trigger incorrectly.
Fix this by skipping the head of the consumer's portion of the
ring, as this index is what will be returned by peek().
Sponsored by: Dell EMC Isilon
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D8685
Reviewed by: hselasky
Do not set WARNS, so it gets the current default of 6.
Fix the warnings by sprinkling static, const, or strdup.
Make some constant data tables const. Fix whitespace.
MFC after: 1 week
Sponsored by: Dell EMC
Squash EBADF from closed stdin, stdout, or stderr in caph_limit_stdio().
Any program used during special shell scripts may commonly be forked
from a parent process with closed standard stream. Do the common sense
thing for this common use.
Reported by: Iblis Lin <iblis AT hs.ntnu.edu.tw>
Reviewed by: oshogbo@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8657
called to allocate a new page of radix trie nodes, there could be a call to
vm_radix_remove() on the same trie (of PG_CACHED pages) as the in-progress
vm_radix_insert(). With the removal of PG_CACHED pages, we can simplify
vm_radix_insert() and vm_radix_remove() by removing the flags on the root of
the trie that were used to detect this case and the code for restarting
vm_radix_insert() when it happened.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8664
Also, handle signed and unsigned chars, and more gracefully handle
invalid input.
Submitted by: bde in response to r309331
MFC after: 1 week
Sponsored by: Dell EMC
Sync libarchive with vendor.
Small improvements, style fixes, bugfixes.
Restores compatibility with tar archives created with Perl Archive::Tar (1)
MFC after: 1 week
Reported by: Matthew Seaman <matthew@freebsd.org> (1)
