Also this fixes the eflags.ac leak from copyin_smap() when the copied
data length is multiple of eight bytes.
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Non-PTI mode does not switch kcr3, which means that kcr3 is almost
always stale. This is important for the NMI handler, which reloads
%cr3 with PCPU(kcr3) if the value is different from PMAP_NO_CR3.
The end result is that curpmap in NMI handler does not match the page
table loaded into hardware. The manifestation was copyin(9) looping
forever when a usermode access page fault cannot be resolved by
vm_fault() updating a different page table.
Reported by: mmacy
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Approved by: re (gjb)
r337289 has a side effect of reducing usb frame 0 buffer size down to
touch report size. That broke some devices e.g. "Raydium Touch System"
which are capable of generating non-touch frames of bigger length.
Fix it with enlarging frame 0 buffer up to internal wmt(4) buffer size.
Reported by: Roberto Fernandez Cueto <roberfern@gmail.com>
Tested by: Roberto Fernandez Cueto <roberfern@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16772
And simplify this a little by flattening the directory structure.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D16955
passing the authentication token to the external program.
Approved by: re (kib)
Submitted by: Thomas Munro <munro@ip9.org>
MFC after: 1 week
Differential Revision: D16950
to clear L2 and L3 route caches.
Also mark one function argument as __unused.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17007
macro rather than hand crafted code.
No functional changes.
Reviewed by: karels
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17006
inp_route6 for IPv6 code after r301217.
This was most likely a c&p error from the legacy IP code, which
did not matter as it is a union and both structures have the same
layout at the beginning.
No functional changes.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17005
use the already existing one. No functional changes.
Reviewed by: karels, ae
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D17004
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
/etc/security/audit_event to provide a list of audit event-number <->
name mappings. However, this occurs too late for anonymous tracing.
With this change, adding 'audit_event_load="YES"' to /boot/loader.conf
will cause the boot loader to preload the file, and then the kernel
audit code will parse it to register an initial set of audit event-number
<-> name mappings. Those mappings can later be updated by auditd(8) if
the configuration file changes.
Reviewed by: gnn, asomers, markj, allanjude
Discussed with: jhb
Approved by: re (kib)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16589
The format for kernels is documented as being space-delimited, but
forthloader was more lenient on this and so people began to depend on it.
A later pass will be made to document all of the fun features that forthloader
allowed that may not be immediately obvious.
Reported by: mmacy
Approved by: re (kib)
This appeared to be required to have EFI RT support and EFI RTC
enabled by default, because there are too many reports of faulting
calls on many different machines. The knob is added to leave the
exceptions unhandled to allow to debug the actual bugs.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
handling.
This is split into a separate commit from the main change to make it
easier to handle possible revert after upcoming KBI freeze.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
Print error message in verbose mode when CLOCK_SETTIME() clock_if.m
method failed. For EFIRT RTC clock, add error code for the failure of
CLOCK_GETTIME() report.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
trap_pfault() KPTI violation check.
EFI RT may set curpmap to NULL for the duration of the call for some
machines (PCID but no INVPCID). Since apparently EFI RT code must be
ready for exceptions from the calls, avoid dereferencing curpmap until
we know that this call does not come from usermode.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
that can be coalesced. To be clear, fragmentation of phys_avail[] is not
the cause. This fragmentation of vm_phys_segs[] arises from the "special"
calls to vm_phys_add_seg(), in other words, not those that derive directly
from phys_avail[], but those that we create for the initial kernel page
table pages and now for the kernel and modules loaded at boot time. Since
we sometimes iterate over the physical memory segments, coalescing these
segments at initialization time is a worthwhile change.
Reviewed by: kib, markj
Approved by: re (rgrimes)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16976
Ths prevents etcupdate and mergemaster from deleting it for now.
Approved by: re (rgrimes), will (mentor)
Differential Revision: https://reviews.freebsd.org/D16975
for the "ctld hanging on reload" problem observed in same cases under
high load. I'm not 100% sure it's _the_ fix, as the issue is rather hard
to reproduce, but it was tested as part of a larger path and the problem
disappeared. It certainly shouldn't break anything.
Now, technically, it shouldn't be needed. Quoting mav@, "After
ct->ct_online == 0 there should be no new sessions attached to the target.
And if you see some problems abbout it, it may either mean that there are
some races where single cfiscsi_session_terminate(cs) call may be lost,
or as a guess while this thread was sleeping target was reenabbled and
redisabled again". Should such race be discovered and properly fixed
in the future, than this and the followup two commits can be backed out.
PR: 220175
Reported by: Eugene M. Zheganin <emz at norma.perm.ru>
Tested by: Eugene M. Zheganin <emz at norma.perm.ru>
Discussed with: mav
Approved by: re (gjb)
MFC after: 2 weeks
Sponsored by: playkey.net
play the MIDI files through /dev/sequencer device with tools like
playmidi. The audio output will go through the external MIDI device
such like wavetable synthesis card.
Reviewed by: matk (a long time ago), kib
Approved by: re (kib)
Tested with: Terratec SiXPack 5.1+ + Yamaha DB50XG
MFC after: 4 weeks
The switch to lualoader creates a problem with userboot: the host is
inclined to build userboot with Lua, but the host userboot's interpreter
must match what's available on the guest. For almost all FreeBSD guests in
the wild, Lua is not yet available and a Lua-based userboot will fail.
This revision updates userboot protocol to version 5, which adds a
swap_interpreter callback to request a different interpreter, and tries to
determine the proper interpreter to be used based on how the guest
/boot/loader is compiled. This is still a bit of a guess, but it's likely
the best possible guess we can make in order to get it right. The
interpreter is now embedded in the resulting executable, so we can open
/boot/loader on the guest and hunt that down to derive the interpreter it
was built with.
Using -l with bhyveload will not allow an intepreter swap, even if the
loader specified happens to be a userboot with the wrong interpreter. We'll
simply complain about the mismatch and bail out.
For legacy guests without the interpreter marker, we assume they're 4th.
For new guests with the interpreter marker, we'll read it and swap over
to the proper interpreter if it doesn't match what the userboot we're using
was compiled with.
Both flavors of userboot are installed by default, userboot_4th.so and
userboot_lua.so. This fixes the build WITHOUT_FORTH as a coincidence, which
was broken by userboot being forced to 4th.
Reviewed by: imp, jhb, araujo (earlier version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D16945
Some paths through be_exists will set the error state, others will not
There are multiple reasons that a call can fail, so clean it up a bit: all
paths now return an appropriate error code so the caller can attempt to
distinguish between a BE legitimately not existing and just having the wrong
mountpoint. The caller is expected to bubble the error through to the
internal error handler as needed.
This fixes some unfriendliness with bectl(8)'s activate subcommand, where
it might fail due to a bad mountpoint but the only message output is a
generic "failed to activate" message.
Approved by: re (gjb)
This fixes an upstream regression introduced in r331404, causing overly
aggressive reclamation of the ARC when under pressure.
Diagnosed by: Paul <devgs@ukr.net>
Approved by: re (gjb)
MFC after: 3 days
cycle. The i386 build failure appears to be transient, and
now becoming more difficult to reliably reproduce to identify
the cause. I will continue to investigate this, however.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
The PCIOCLISTVPD ioctl on /dev/pci is used to fetch a list of VPD
key-value pairs for a specific PCI function. It is used by
'pciconf -l -V'. The list is stored in a userland-supplied buffer as
an array of variable-length structures where the key and data length
are stored in a fixed-size header followed by the variable-length
value as a byte array. To facilitate walking this array in userland,
<sys/pciio.h> provides a PVE_NEXT() helper macro to return a pointer
to the next array element by reading the the length out of the current
header and using it to compute the address of the next header.
To simplify the implementation, the ioctl handler was also using
PVE_NEXT() when on the user address of the user buffer to compute the
user address of the next array element. However, the PVE_NEXT() macro
when used with a user address was reading the value's length by
indirecting the user pointer. The value was ready after the current
record had been copied out to the user buffer, so it appeared to work
on architectures where user addresses are directly dereferencable from
the kernel (all but powerpc and i386 after the 4:4 split). The recent
enablement of SMAP on amd64 caught this violation however. To fix,
add a variant of PVE_NEXT() for use in the ioctl handler that takes an
explicit value length.
Reported by: Jeffrey Pieper @ Intel
Reviewed by: kib
Approved by: re (gjb)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16800
Previously lualoader would remain silent, rather than printing
command_errmsg or noting that a command had failed or was not found.
Approved by: re (gjb)
r337776 started hashing the fragments into buckets for faster lookup.
The hashkey is larger than intended. This results in random stack data being
included in the hashed data, which in turn means that fragments of the same
packet might end up in different buckets, causing the reassembly to fail.
Set the correct size for hashkey.
PR: 231045
Approved by: re (kib)
MFC after: 3 days
Remove the PNP info for the moment from the driver. It's an
experimental driver (as noted in r328150). It's performance is about
1/10th that of aesni. It will often panic when used with GELI (PR
2279820). It's not in our best interest to have such a driver be
autoloaded by default.
Approved by: re@ (rgrimes)
Reviewed By: cem@
Differential Review: https://reviews.freebsd.org/D16959
lualoader has moved to a model where the user is expected to disable color
as desired, rather than disabling it automatically for serial boots, due to
more wide-spread support for color sequences.
In a similar vain, though also to reduce special cases, lualoader no
longer disables the beastie menu automatically for !x86. This was done in
Forth land with a different loader.rc that simply didn't invoke the menu
routines, thus wasn't necessary.
This set of changes puts release images back to how they would've been
experienced prior to the switch to Lua.
Approved by: re (rgrimes)
Same as r333305, with Linux 4.17 dts the compatible for the prcm added
'simplebus', it mean that the simplebus driver will attach to it
at the BUS_PASS_BUS pass.
Change the pass for the prcm driver to be at BUS_PASS_BUS so we will win
the attach.
This introduce a problem as this driver needs the omap_scm one to be already
attached. omap_scm also attach at BUS_PASS_BUS but after the prcm one as it is
after in the dtb and the simplebus driver simpy walk the tree to attach it's
children.
Use the bus_new_pass method to defer the frequencies read at BUS_PASS_TIMER.
This fixes booting on pandaboard
Approved by: re (rgrimes)
It is used by a number of applications, notably top(1).
Reported by: netchild
Reviewed by: allanjude
Approved by: re (delphij)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16943
Resetting to the default color scheme was done prior to reading the config.
This is bogus; colors may only be declined by the user with the
loader.conf(5) variable "loader_color", so such a request for no color will
not be completely honored as we reset to the default color scheme
unconditionally.
Approved by: re (rgrimes)
