It turns out on a 16550 w/ a 25MHz SoC reference clock you get a little
over 3% error at 115200 baud, which causes this to fail.
Just .. cope. Things cope these days.
Default to 30 (3.0%) as before, but allow UART_DEV_TOLERANCE_PCT to be
set at build time to change that.
QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.
This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle
this difference.
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
Small $25 IoT device, 400mhz Atheros cpu, Atheros WiFi and Ethernet
18 GPIOs, and support for Relay, Servo, and OLED expansion
https://onion.io/omega/
Reviewed by: adrian
Approved by: bapt (mentor)
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4188
Setting the dumpdev via env e.g. loader.conf provides the ability to
configure the kernel dump device during early boot. When using this
g_io_getattr was returning EPERM due to cp->acr == 0.
Fix this by calling g_access to ensure we're a read consumer prior
to calling g_dev_setdumpdev.
MFC after: 2 weeks
Sponsored by: Multiplay
OF_getprop() to get encode-int encoded values from the OF tree. This is
a no-op at present, since all existing PowerPC ports are big-endian, but
it is a correctness improvement and will be required if we have a
little-endian kernel at some future point.
Where it is totally impossible for the code ever to be used on a
little-endian system (much of powerpc/powermac, for instance), I have not
necessarily made the appropriate changes.
MFC after: 1 month
This structure must be binary compatible regardless of PMAP
version being used. Create reserved section for NEW_PMAP to
make other variables be placed exactly in the same memory
addresses. This fixes kgdb/gdb behavoiur, which uses pcb.h stuctures.
The NEW_PMAP is kernel flag, so it does not propagate to the buildworld,
what makes the tools using pcb.h unable to parse PCB data.
Reviewed by: mmel, kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4011
Use proper size of exynos_ehci_softc, not the generic one.
Reviewed by: andrew
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4189
inconsistency when installing new locales and may also result in failures
when reinstalling after having run make delete-old (due to previous
inconsistencies) for now recommand removing all locales until install(1) is
fixed
the largest size of buffer cache block or the mapping of the buffer
is bogus. When a mount with rsize=4096,wsize=4096 was done, f_iosize
would be set to 4096. This resulted in corrupted directory data, since
the buffer cache block size for directories is NFS_DIRBLKSIZ (8192).
This patch fixes the code so that it always sets f_iosize to at least
NFS_DIRBLKSIZ.
Tested by: krichy@cflinux.hu
PR: 177971
MFC after: 2 weeks
would call smb_iod_request(). This call could return as soon as the
wakeup(evp) in smb_iod_main() call is done and then could destroy
the mutexes. This caused a race with the rest of smb_iod_main()s
use of these mutexes.
A crash reported on freebsd-stable@ by Christian Kratzer was
diagnosed as a use of one of these mutexes after it was destroyed.
This patch moves destruction of the mutexes from smb_iod_destroy()
to the end of smb_iod_thread(), so that they aren't destroyed before
the thread is done with them. Christian comfirmed that the patch
stopped the crashes from happening.
Reported by: ck-lists@cksoft.de (Christian Kratzer)
Tested by: ck-lists@cksoft.de (Christian Kratzer)
Diagnosed by: jhb
Reviewed by: jhb
MFC after: 2 weeks
- While at it, arrange #ifndefs in kern_dump.c more intelligently; it's
rather confusing to have multiple competing and/or unused functions in
the kernel.
This allows most of the build to simply consider MK_META_MODE
Update to latest dirdeps.mk so we can do:
make -f dirdeps.mk bin/cat.i386
Reviewed by: bdrewery
Switch PCI register reads from using magic numbers to using the names
defined in pcireg.h
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4185
Using other values causes VMXNET3_CMD_ENABLE to fail. The Linux
driver also enforces this restriction.
Reviewed by: bryanv
MFC after: 1 week
Sponsored by: Norse
Differential Revision: https://reviews.freebsd.org/D4139
accident with RTL8168G and later chips when the interface actually was
brought up. This is due to the fact that with these MAC variants, RXDV
gate needs be disabled for WOL to work. So do just that in re_setwol()
when IFCAP_WOL is requested.
Reported and tested by: dhw
MFC after: 3 days
