capability is present as not all devices supported by the agp_i810 driver
(such as i915) have the AGP capability. Instead, add an identify routine
to the agp_i810 driver that uses the PCI ID to determine if it should
create an agp child device.
if we need a valid MAC address (for probing the media for example) before
ether_ifattach() has been called since IF_LLADDR() is NULL then.
Tested by: tisco
the addition of pci_find_extcap().
- Change the drm drivers to attach to vgapci. This is #ifdef'd so the
code can be shared across branches.
- Use pci_find_extcap() to look for AGP and PCIE capabilities in drm.
- GC all the drmsub stuff for i810/i830/i915. The agp and drm devices are
now both children of vgapci.
attach to the hostb driver instead. This means that agp can now be loaded
at runtime (in theory at least). Also, the drivers no longer have to
explicity call device_verbose() to cancel out any earlier calls to
device_quiet() by the hostb(4) driver (this shows a limitation in new-bus,
drivers really shouldn't be doing device_quiet() until they know they are
going to drive that device, i.e. in attach).
drivers already map sections into KVA as needed anyway. Note that this
will probably break the nvidia driver, but I will coordinate to get that
fixed.
MFC after: 2 weeks
AMD-8111 SMBus 2.0 controller) are all SMBus 2.0 controllers,
and need another implementation of SMBus access methods, while
this driver supports AMD-756 SMBus 1.0 controller and clones,
including AMD-8111 SMBus 1.0 controller.
Tested by: Vladimir Timofeev (0x006410de),
mezz (0x008410de),
ru (0x00d410de)
All of us got the same(!) nonsense when running ``mbmon -S'',
repeated every four rows.
SMBus 1.0 and not SMBus 2.0.
AMD-8111 hub (datasheet is publically available) implements both SMBus
2.0 (a separate PCI device) and SMBus 1.0 (a subfunction of the System
Management Controller device with the base I/O address is accessible
through the CSR 0x58). This driver only supports AMD-756 SMBus 1.0
compatible devices.
With the patched sysutils/xmbmon port (to also fix PCI ID and to enable
smb(4) support), I now get:
pciconf:
none0@pci0:7:2: class=0x0c0500 card=0x746a1022 chip=0x746a1022 rev=0x02 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-8111 SMBus 2.0 Controller'
class = serial bus
subclass = SMBus
amdpm0@pci0:7:3: class=0x068000 card=0x746b1022 chip=0x746b1022 rev=0x05 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-8111 ACPI System Management Controller'
class = bridge
dmesg:
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0x10e0-0x10ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0
# mbmon -A -d
Summary of Detection:
* SMB monitor(s)[ioctl:AMD8111]:
** Winbond Chip W83627HF/THF/THF-A found at slave address: 0x50.
** Analog Dev. Chip ADM1027 found at slave address: 0x5C.
* ISA monitor(s):
** Winbond Chip W83627HF/THF/THF-A found.
I think the confusion comes from the fact that nobody really tried
SMBus with xmbmon :-), since sysutils/xmbmon port doesn't come with
SMBus support enabled, neither in FreeBSD 4, nor in later versions,
so mbmon(1) was just showing the values from the Winbond sensors
accessible through the ISA I/O method (mbmon -I), for me anyway.
On my test machine, the amdpm(4) didn't even attach due to I/O port
allocation failure (who knows what the hell it read from CSR 0x58
of the SMBus 2.0 device :-), which isn't in the CSR space).
I've also checked that lm_sensors.org uses correct PCI ID for SMBus
1.0 of AMD-8111:
i2c-amd756.c: {PCI_VENDOR_ID_AMD, 0x746B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111 },
This driver is analogous to our amdpm.c which supports SMBus 1.0
AMD-756 and compatible devices, including SMBus 1.0 on AMD-8111.
i2c-amd8111.c: { 0x1022, 0x746a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
This driver is analogous to nForce-2/3/4, i2c-nforce2.c, which
supports SMBus 2.0, and which our amdpm.c does NOT support
(SMBus 2.0 uses a different, ACPI-unified, API to talk to SMBus).
At least I know for sure it doesn't work with my nForce3. :-)
(The xmbmon port will be fixed to correct the PCI ID too and to
enable the smb(4) support.)
SMBus busses. Because of limitations in smbus_if.m, the second smbus is
attached to an amdpm1 device that is a child of amdpm0.
Submitted by: Artemiev Igor ai (at) bmc dot brk dot ru
and some fixes from Motomichi Matsuzaki. Testing involved many people, but the
final, successful testing was from rwatson who endured several rounds of "it
crashes at XYZ stage" "oh, please correct this typo and try again." The Linux
driver, and to a small extent the limited specs, were both used as a reference
for how to program the chipset.
PR: kern/80396
Submitted by: Martin Mersberger
- Don't call tulip_addr_filter() to reset the RX address filter in
tulip_reset() since that gets called before ether_ifattach(). Just
call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
thing with the added bonus that we leaked the driver lock if the MTU
was > ETHERMTU in the homerolled version. This part will be MFC'd.
Clue from: wpaul (1)
Stolen from: marcel (2 via patch for dc(4))
MFC after: 1 week
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
PCI-ISA bridge. Thus, when viapm0 or viapropm0 attaches, isab0 dosen't
attach so there is no isa0 bus hung off of that bridge. In the non-ACPI
case, legacy0 will add an isa0 anyway as a fail-safe, but ACPI assumes that
any ISA bus will be enumerated via a bridge. To fix this, call
isab_attach() to attach an isa0 ISA child bus device if the pm or propm
device we are probing is a PCI-ISA bridge. Both drivers now have to
implement the bus_if interface via the generic methods for resource
allocation, etc. to work. Also, we now add 2 new ISA bus drivers that
attach to viapm and viapropm devices.
PR: kern/87363
Reported by: Oliver Fromme olli at secnetix dot de
Tested by: glebius
MFC after: 1 week
With this change, the driver tests good (at least on i386):
wb0: <Winbond W89C840F 10/100BaseTX> port 0xb800-0xb87f mem 0xe6800000-0xe680007f irq 12 at device 10.0 on pci0
miibus1: <MII bus> on wb0
amphy0: <Am79C873 10/100 media interface> on miibus1
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wb0: Ethernet address: 00:00:e8:18:2a:02
wb0: link state changed to DOWN
wb0: link state changed to UP
- Add locked variants of init() and start().
- Use callout_*() to manage callout.
- Test IFF_DRV_RUNNING rather than IFF_UP in wb_intr() to see if we are
still active when an interrupt comes in.
I couldn't find any of these cards anywhere to test on myself, and google
turns up references to FreeBSD and OpenBSD manpages for this driver when
trying to locate a card that way. I'm not sure anyone actually uses these
cards with FreeBSD.
Tested by: NO ONE (despite repeated requests)
I had to initialize the ifnet a bit earlier in attach so that the
if_printf()'s in vr_reset() didn't explode with a page fault.
- Use M_ZERO with contigmalloc() rather than an explicit bzero.
cards and teach the re(4) driver to attach to revision 3 cards.
Submitted by: Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after: 2 weeks
Reviewed by: imp, mdodd
