60 seconds, respectively. Turn them into sysctls that can be tuned live. The
default values of 5 seconds and 60 seconds have been retained.
Submitted by: Jason Wolfe (j at nitrology dot com)
Reviewed by: gnn, rrs, hiren, bz
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D5024
Files required for the NIC driver
Import from vendor-sys/alpine-hal/2.7
SVN rev.: 294828
HAL version: 2.7
Obtained from: Semihalf
Sponsored by: Annapurna Labs
- Add some new hlist macros.
- Update existing hlist macros removing the need for a temporary
iteration variable.
- Properly define the RCU hlist macros to be SMP safe with regard
to RCU.
- Safe list macro arguments by adding a pair of parentheses.
- Prefix the _list_add() and _list_splice() functions with "linux"
to reflect they are LinuxKPI internal functions.
Obtained from: Linux
MFC after: 1 week
Sponsored by: Mellanox Technologies
close or assert the bug that it is clear when leaving.
Remove an unrelated rotted comment that was attached to the buggy
clearing.
Since draining is not done in more cases, flushing is needed in more
cases, so start fixing flushing:
- do a full flush in ttydisc_close(). State what POSIX requires more
clearly. This was missing ttydevsw_pktnotify() calls to tell the
devsw layer to flush. Hardware tty drivers don't actually flush
since they don't understand this API.
- fix 2 missing wakeups in tty_flush(). Most of the wakeups here are
unnecessary for last close. But ttydisc_close() did one of the
missing ones.
This flow control bug ameliorated the design bug of requiring
potentially unbounded waits in draining. Software flow control is the
easiest way to get an unbounded wait, and a long wait is sometimes
actually useful. Users can type the xoff character on the receiver
and (if ixon is set on the sender) expect the output to be held until
the user is ready for more.
Hardware flow control can also give the unbounded wait, and this bug
didn't affect hardware flow control. Unbounded waits from hardware
flow control take a more unusual configuration. E.g., a terminal
program that controls the modem status lines, or unplugging the cable
in a configuration where this doesn't break the connection.
The design bug is still ameliorated by a newer bug in draining for
last close -- the 1 second timeout. E.g., if the user types the
xoff character and the sender reaches last close, then output is
not resumed and the wait times out after just 1 second. This is
broken, but preferable to an unbounded wait. Before this change,
the output was resumed immediately and usually completed.
Submitted by: bde
MFC after: 2 weeks
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Steven Hartland <steven.hartland@multiplay.co.uk>
illumos/illumos-gate@2bad22584d
exceeds refquota
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: James Pan <jiaming.pan@yahoo.com>
illumos/illumos-gate@3502ed6e7c
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Will Andrews <will@firepipe.net>
illumos/illumos-gate@eb5bb58421
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@c71c00bbe8
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@5bdd995ddb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Simon Klinkert <simon.klinkert@gmail.com>
illumos/illumos-gate@6575bca013
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@eaef6a96de
6292 exporting a pool while an async destroy is running can leave entries
in the deferred tree
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
illumos/illumos-gate@a443cc80c7
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@b39b744be7
This is revert of 5693.
Added hw.ix.flow_control which enables the default flow_control of all ix
interfaces to be set in loader.conf.
Added hw.ix.advertise_speed which enables the default advertised_speed of
all ix interfaces to be set in loader.conf.
Made enable_aim device independent based on hw.ix.enable_aim default.
Reviewed by: erj
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5060
in elf_cpu_load_file(). The only time when the sync is needed is after
kernel module is loaded and the relocation info is processed. And it's
done in elf_cpu_load_file().
- Avoid main lock contention by trylock for if_start, if that fails,
schedule TX taskqueue for if_start
- Don't do direct sending if the packet to be sent is large, e.g.
TSO packet.
This change gives me stable 9.1Gbps TCP sending performance w/ TSO
over a 10Gbe directly connected network (the performance fluctuated
between 4Gbps and 9Gbps before this commit). It also improves non-
TSO TCP sending performance a lot.
Reviewed by: adrian, royger
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5074
intended behaviour in its man page. Simplify tty_drain() to match.
Don't call ttydevsw methods in tty_flush() if the device is gone
since we now sometimes call it then.
The flushing was supposed to be implemented by passing the FNONBLOCK
flag to VOP_CLOSE() for revoke(). The tty driver is one of the few
that can block in close and was one of the fewer that knew about this.
This almost worked in FreeBSD-1 and similarly in Net/2. These
versions only almost worked because there was and is considerable
confusion between IO_NDELAY and FNONBLOCK (aka O_NONBLOCK). IO_NDELAY
is only valid for VOP_READ() and VOP_WRITE(). For other VOPs it has
the same value as O_SHLOCK. But since vfs_subr.c and tty.c
consistently used the wrong flag and the O_SHLOCK flag is rarely set,
this mostly worked. It also gave the feature than applications could
get the non-blocking close by abusing O_SHLOCK.
This was first broken then fixed in 1995. I changed only the tty
driver to use FNONBLOCK, as a hack to get non-blocking via the normal
flag FNONBLOCK for last closes. I didn't know about revoke()'s use
of IO_NDELAY or change it to be consistent, so revoke() was broken.
Then I changed revoke() to match.
This was next broken in 1997 then fixed in 1998. Importing Lite2 made
the flags inconsistent again by undoing the fix only in vfs_subr.c.
This was next broken in 2008 by replacing everything in tty.c and not
checking any flags in last close. Other bugs in draining limited the
resulting unbounded waits to drain in some cases.
It is now possible to fix this better using the new FREVOKE flag.
Just restore flushing for revoke() for now. Don't restore or undo any
hacks for ordinary last closes yet. But remove dead code in the
1-second relative timeout (r272789). This did extra work to extend
the buggy draining for revoke() for as long as possible. The 1-second
timeout made this not very long by usually flushing after 1 second.
Submitted by: bde
MFC after: 2 weeks
The working copy of leapfile resides in /var/dbntpd.leap-seconds.list.
/etc/ntp/leap-seconds (periodically updated from ftp://time.nist.gov/pub/
or ftp://tycho.usno.navy.mil/pub/ntp/) contains the master copy should
automatic leapfile updates be disabled (default).
Automatic leapfile updates are fetched from $ntp_leapfile_sources,
defaulting to https://www.ietf.org/timezones/data/leap-seconds.list,
within $ntp_leapfile_expiry_days (default 30 days) from leap-seconds
file expiry. Automatic updates can be enabled by setting
$daily_ntpd_leapfile_enable="YES" in periodic.conf. To avoid congesting
the ntp leapfile source the automatic update randomized by default but
can be disabled through daily_ntpd_avoid_congestion="NO" in
periodic.conf.
Suggested by: des
Reviewed by: des, roberto, dwmalone, ian, cperciva, glebius, gjb
MFC after: 1 week
X-MFC with: r289421, r293037
boot1 to pass in files with newlines in them. Now that the EFI loader
groks foo=bar on the command line, this can allow a more general setup
than traditional boot loader args will allow.
Differential Revision: https://reviews.freebsd.org/D5038
in computing a shift index. The error was due to the use of mixed
fls() / __fls() functions in another implementation of qfq.
To avoid that the problem occurs again, properly document which
incarnation of the function we need.
Note that the bug only affects QFQ in FreeBSD head from last july, as
the patch was not merged to other versions.
The only difference between dcbzl and dcbz is dcbzl operates on native cache
line lengths regardless of L1CSR0[DCBZ32]. Since we don't change the cache line
size, the cacheline_size variable will reflect the used cache line length, and
dcbz will work as expected.
The fail point handler may sleep, but this is not permitted while holding a
rm read lock.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
