It doesn't appear to be safe to use gtask->gt_name.
Reported by: Mark Johnston, Jenkins
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12448
Move handling of these three pathconf() variables out of vop_stdpathconf()
and into devfs_pathconf() as TTY devices can only be devfs files. In
addition, only return settings for these three variables for devfs devices
whose device switch has the D_TTY flag set.
Discussed with: bde, kib
Sponsored by: Chelsio Communications
Check the return code of intr_setaffinity() and log any errors
it returns. When a qid is not located, log an error before returning
failure. Also, use __func__ rather than hardcoding the function name
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12436
Previously had the same short and long description as taskqueues.
This could cause problems with memguard(9) and vmstat -m which use
the short description as a unique identifier.
Reviewed by: sbruno
Approved by: sbruno (mentor)
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12438
- Use HWRM_FUNC_VF_CFG instead of HWRM_FUNC_CFG on VFs
- Fix NPAR/VF detection
- Clean up flag definitions
- Don't allow WoL on VFs
Although the bnxt driver doesn't support SR-IOV so can create VFs yet,
the PF could be running Linux or ESCi with a VF passed through to a
FreeBSD guest. This fixes the driver for that use case.
Submitted by: Siva Kallam <siva.kallam@@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12410
accepts PQ_NONE as the specified queue and returns a Boolean indicating
whether the page's wire count transitioned to zero. Use these features
in dev/drm2.
Reviewed by: kib, markj
MFC after: 1 week
This ensures that the loader will not load the module if it's also built in to
the kernel.
PR: 220860
Submitted by: Eugene Grosbein <eugen@freebsd.org>
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
initialize nvp on every loop iteration and the code under 'fail'(!) label
detects success by checking of nvp != NULL.
Submitted by: pjd@
MFC after: 1 month
Sponsored by: Wheel Systems
to 'fail' on error it was treated as success, because nvp!=NULL. Fix this
by not handling success under 'fail' label and by using separate variable
for parent nvpair.
If we succeeded to allocate nvlist, but failed to allocated nvpair we
would leak nvls[ii] on return. Destroy it when we cannot allocate nvpair,
before we goto fail.
Submitted by: pjd@ and oshogbo@ (minor changes)
Found by: scan-build
MFC after: 1 month
Sponsored by: Wheel Systems
initially NULL, which is not possible. Change the loop to
'do {} while (array != NULL)' to satisfy scan-build and assert that
array really cannot be NULL just in case.
Submitted by: pjd@
Found by: scan-build
MFC after: 1 month
Sponsored by: Wheel Systems
Make scan-build happy by casting to 'void *' instead of 'void **'.
Submitted by: pjd@
MFC after: 1 month
Found by: scan-build and cppcheck
Sponsored by: Wheel Systems
Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of packets flow.
When we create new named object, there are not yet any rules, that
references it, thus holding IPFW_UH_WLOCK is enough to safely update
needed structures. When we destroy an object, we do this only when its
reference counter becomes zero. And it is safe to not acquire IPFW_WLOCK,
because noone references it. The another case is when we failed to finish
some action and thus we are doing rollback and destroying an object, in
this case it is still not referenced by rules and no need to acquire
IPFW_WLOCK.
This also fixes panic with INVARIANTS due to recursive IPFW_WLOCK acquiring.
MFC after: 1 week
Sponsored by: Yandex LLC
1/4 of the number of queues times queue entries is too limiting. It
works up to about 4k IOPS / 3.0GB/s for hardware that can do
4.4k/3.2GB/s with nvd. 3/4 works better, though it highlights issues
in the fairness of nda's choice of TRIM vs READ. That will be fixed
separately.
Previously ios->current was set to 0 until the first
cam_iosched_cl_maybe_steer() call.
PR: 221954
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12349
Previously callout_reset() was called with a "ticks" value that was
off by one. As a result cam_iosched_ticker() was called a bit too
frequently: On systems with hz=1000 a quanta value of 200 resulted in
~250 calls and a value of 100 in ~111 calls.
For the "queue_depth" and "bandwidth" limiters the difference doesn't
matter but the "iops" limiter depends on the scheduling to enforce the
correct maximum.
PR: 221956
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12350
Invalid values can result in devision-by-zero panics or other
undefined behaviour so lets not allow them.
PR: 221957
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12351
Use the write queue for BIO_ZONE commands so they can't get executed
ahead of writes that were sent after them. More generally, since they
introduce strong ordering into the list, they need to go to the write
queue (which is the only queue that BIO_ORDERED is honored for at the
moment). In fact, fix mismatch between queueing and dequeueing code by
changing this to queue all non-reads (and non-trims) to the write
queue.
As a side effect this prevents the kernel message:
kernel: Found bio_cmd = 0x9
which cam_iosched_next_bio() emits when finding commands
other than BIO_READ in the read queue.
PR: 221973
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12353
RXQ setup for netmap was broken because netmap_rxq_init was getting called
before IFDI_INIT - thus we ended up with ring tail pointer being reset to zero.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12140
In ql_hw_send() return EINVAL when TSO framelength exceeds max
supported length by HW.(davidcs)
2. ql_os.c:
In qla_send() call bus_dmamap_unload before freeing mbuf or
recreating dmmamap.(davidcs)
In qla_fp_taskqueue() Add additional checks for IFF_DRV_RUNNING
Fix qla_clear_tx_buf() call bus_dmamap_sync() before freeing
mbuf.
Submitted by:David.Bachu@netapp.com
MFC after:5 days
illumos/illumos-gate@554675eee7554675eee7https://www.illumos.org/issues/8473
Scrubbing is supposed to detect and repair all errors in the pool. However,
it wrongly ignores active spare devices. The problem can easily be
reproduced in OpenZFS at git rev 0ef125d with these commands:
truncate -s 64m /tmp/a /tmp/b /tmp/c
sudo zpool create testpool mirror /tmp/a /tmp/b spare /tmp/c
sudo zpool replace testpool /tmp/a /tmp/c
/bin/dd if=/dev/zero bs=1024k count=63 oseek=1 conv=notrunc of=/tmp/c
sync
sudo zpool scrub testpool
zpool status testpool # Will show 0 errors, which is wrong
sudo zpool offline testpool /tmp/a
sudo zpool scrub testpool
zpool status testpool # Will show errors on /tmp/c,
# which should've already been fixed
FreeBSD head is partially affected: the first scrub will detect some errors, but the second scrub will detect more.
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 1 week
Sponsored by: Spectra Logic Corp
It is reported that the default value of 4KB results in a substantial
memory use overhead (at least, on some configurations). Using 1KB seems
to reduce the overhead significantly.
PR: 222377
Reported by: Sean Chittenden <sean@chittenden.org>
MFC after: 1 week
I overlooked the fact that that ZIO_IOCTL_PIPELINE does not include
ZIO_STAGE_VDEV_IO_DONE stage. We do allocate a struct bio for an ioctl
zio (a disk cache flush), but we never freed it.
This change splits bio handling into two groups, one for normal
read/write i/o that passes data around and, thus, needs the abd data
tranform; the other group is for "data-less" i/o such as trim and cache
flush.
PR: 222288
Reported by: Dan Nelson <dnelson@allantgroup.com>
Tested by: Borja Marcos <borjam@sarenet.es>
MFC after: 10 days
illumos/illumos-gate@2bcb5458542bcb545854https://www.illumos.org/issues/8602
When I landed the fix for 8558, I incorrectly added the "dp_early_sync_tasks"
field to the "dsl_pool" structure. This field is used in DelphixOS, but not in
illumos. It was incorrectly pulled into illumos, so this bug is to remove it
from the structure.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 week
indicating whether the page's wire count transitioned to zero. Use that
return value in zbuf_page_free() rather than checking the wire count.
MFC after: 1 week
Exploit r288122 to address a cosmetic issue. Since PV chunk pages don't
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
MFC after: 1 week
Make the NFSv4 pNFS client function nfsrpc_layoutget() a static, since it
is only used in sys/fs/nfsclient/nfs_clrpcops.c.
This prepares the code for future patches that add Flex File layout
support.
This patch adds a new function called nfsm_uiombuflist(), which is
similar to nfsm_uiombuf(), but doesn't not use the fields in
struct nfsrv_descript. This new function will be used by the pNFS client
for writing to mirrors using Flex Files layout.
The function is not yet called anywhere.
Also, get rid of #ifndef APPLE, which is ancient cruft left over from
the Mac OSX port of the NFSv4 client.
Simplify nfsrpc_layoutreturn() args. in preparation for the addition
of Flex File layout support, since File layout uses a 0 length field.
Flex Files does use a longer field, but that will be added in a
subsequent commit.
