The tests haven't been run them, but this is enough to build them so I can
get feedback on if the various crt.h headers are correct.
MFC with: r339738
Sponsored by: DARPA, AFRL
The number of fans on a PowerMac7,3 with liquid cooling is 9.
Reviewed by: andreast@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17754
Previously, changing the MTU would require destroying the lagg and
creating a new one. Now it is allowed to change the MTU of
the lagg interface and the MTU of the ports will be set to match.
If any port cannot set the new MTU, all ports are reverted to the original
MTU of the lagg. Additionally, when adding ports, the MTU of a port will be
automatically set to the MTU of the lagg. As always, the MTU of the lagg is
initially determined by the MTU of the first port added. If adding an
interface as a port for some reason fails, that interface is reverted to its
original MTU.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reviewed by: mav
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D17576
then runs these from the base test programs. With this we can check
crtbeginS.o and crtendS.o are working as expected.
MFC with: r339738
Sponsored by: DARPA, AFRL
It seems if a Radeon card is already initialized by u-boot, it won't be
reinitialized by the kernel, and the DRM module will fail to attach. This
steals the reset code from mips/octopci.c to blindly reset the bus on attach.
This was tested on a AmigaOne X5000/20, such that it can be booted from the
local video console, and get a video console in FreeBSD.
Add support for "local" modules. By default, these modules are
located in LOCALBASE/sys/modules (where LOCALBASE defaults to
/usr/local). Individual modules can be built along with a kernel by
defining LOCAL_MODULES to the list of modules. Each is assumed to be
a subdirectory containing a valid Makefile. If LOCAL_MODULES is not
specified, all of the modules present in LOCALBASE/sys/modules are
built and installed along with the kernel.
This means that a port that installs a kernel module can choose to
install its source along with a suitable Makefile to
/usr/local/sys/modules/<foo>. Future kernel builds will then include
that kernel module using the kernel configuration's opt_*.h headers
and install it into /boot/kernel along with other kernel-specific
modules.
This is not trying to solve the issue of folks running GENERIC release
kernels, but is instead aimed at folks who build their own kernels.
For those folks this ensures that kernel modules from ports will
always be using the right KBI, etc. This includes folks running any
KBI-breaking kernel configs (such as PAE).
There are still some kinks to be worked out with cross-building (we
probably shouldn't include local modules in cross-built kernels by
default), but this is a sufficient starting point.
Reviewed by: imp
MFC after: 3 months
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16966
Curiously, the in-kernel routines always use the design voltage to
convert from mA to mW, but acpiconf in userland uses the current
voltage. As a result, this can report a different mW rate than
acpiconf.
Submitted by: Manuel Stühn <freebsdnewbie@freenet.de>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17077
One less non-trivial dependency of rtld on libc. Also,
amd64_set_fsbase() is to be converted to ifunc, which I do not want to
support inside rtld.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In particular, do it before the first call to allocate_initial_tls(),
which contains MD parts to set the initial thread' TLS pointer.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If RLIM_INFINITY == -1ULL (such as on macOS) the min() call will result
in a value of less than 1 being returned. This causes nftw() to fail
with EINVAL.
While touching this file also fix includes to work on Linux/macOS and don't
declare snprintf since it may have different attributes in the system
headers there.
Reviewed By: mmacy
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17682
With lld-generated binaries the first PT_LOAD will usually be a read-only
segment unless you pass --no-rosegment. For those binaries the textsize is
determined by the next PT_LOAD. To allow both LLD and bfd 2.17 binaries to
be parsed correctly use the end of the last PT_LOAD that is marked as
executable instead.
I noticed that the value was wrong while adding some debug prints for some rtld
changes for CHERI binaries. `obj->textsize` only seems to be used by PPC so the
effect is untested. However, the value before was definitely wrong and the new
result matches the phdrs.
Reviewed By: kib
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17117
src branch is used when generating the hardware.html page.
MFC after: 3 days
MFC before: 12.0-BETA3
MFC with: r339873
Sponsored by: The FreeBSD Foundation
AVAHI to the list. This fixes the textproc/docproj build
seemingly following FLAVORS being added.
Specifically, the problem with the dependency chain here is:
- textproc/docproj depends on print/cups, which sets AVAHI=on
by default;
- net/avahi-app depends on devel/gobject-introspection, which
requires python3+;
- graphics/netpbm depends on graphics/mesa-libs, which can
only be built with python2.7;
- textproc/docproj depends on a number of graphics ports for
font rendering, etc.
MFC after: 3 days
MFC before: 12.0-BETA3
Sponsored by: The FreeBSD Foundation
taskqgroup_detach() would remove the task even if it was running or
enqueued, which could lead to panics (see D17404). With this change,
taskqgroup_detach() drains the task and sets a new flag which prevents the
task from being scheduled again.
I've added grouptask_block() and grouptask_unblock() to allow control
over the flag from other locations as well.
Reviewed by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17674
The previous iteration of try_include attempted to be 'friendly' and error()
out if we hit an error that wasn't ENOENT. This was semi-OK, but fragile as
it relied on pattern matching the error message.
Move the responsibility for handling failure to the caller. Following
a common lua pattern, we'll return the return value of the underlying
require() on success, or false and an error message.
Reported by: bcran
MFC after: 3 days
dialog will conditionally ignore the --hline option if not enough space
was available to accomodate for the text width. Traditionally the width
of the widget had to be 10 wider than the text. Recent updates to dialog
have changed the requirement to be at least 12 wider than the hline text
else the hline text is not rendered at the bottom of the widget.
Sponsored by: Smule, Inc.
The provided example jail configs do not work for multiple interfaces.
Multiple interfaces need to be specified as a comma separated list or
using multiple += lines in jail.conf. In the given example, a space-
separated string is used, which doesn't work with multiple interfaces.
Also added a note to the README about VIMAGE being built-in by default
on amd64 in FreeBSD 12, with appropriate instructions for loading the
necessary netgraph ether module (ng_ether) since it is neither built-
in nor autoloads.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reported by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 3 days
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17697
Currently truss(1) shows shm_open(SHM_ANON, ...) as shm_open("(null)", ...).
Detect the special value and display it by name.
Reviewed by: jhb, allanjude, tuexen
Approved by: mjg (mentor)
MFC with: r339224
Differential Revision: https://reviews.freebsd.org/D17461
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.
PR: 201695
Submitted by: Russell Yount <Russell.Yount AT gmail.com>
Differential Revision: https://reviews.freebsd.org/D17633
