These examples show expected behavior of indent(1). They are meant to be used
together with a regression test mechanism, either Kyua, a Makefile or perhaps
something else. The mechanism should in essence do this:
indent -P${test}.pro < ${test}.0 > ${test}.0.run
and compare ${test}.0.stdout to ${test}.0.run. If the files differ or the exit
status isn't 0, the test failed.
* ${test}.pro is an indent(1) profile: a list of options passed through a file.
The program doesn't complain if the file doesn't exist.
* ${test}.0 is a C source file which acts as input for indent(1). It doesn't
have to have any particular formatting, since it's the output that matters.
* ${test}.0.stdout contains expected output. It doesn't have to be formatted in
Kernel Normal Form as the point of the tests is to check for regressions in
the program and not to check that it always produces KNF.
Reviewed by: ngie
Approved by: pfg (mentor)
Differential Revision: https://reviews.freebsd.org/D9007
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.
The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.
This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.
Sponsored-by: rsync.net
Differential Revision: D9235
Reviewed-by: adrian
Aliases are normally given names that include a key that's unique for each
input object file. This, for example, ensures that aliases for identically
named local symbols in different object files don't conflict. However, in
some cases the static linker will leave an undefined alias after merging
identical weak symbols, resulting in a link error. A non-unique name allows
the aliases to be merged as well.
PR: 216871
X-MFC With: r313262
Refresh upstream driver before impending conversion to iflib.
Major new features:
- Support for Fortville-based 25G adapters
- Support for I2C reads/writes
(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).
- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.
Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation
If a file opened over a vnode has an advisory lock set at close,
vn_closefile() acquires additional vnode use reference to prevent
freeing the vnode in vn_close(). Side effect is that for device
vnodes, devfs_close() sees that vnode reference count is greater than
one and refuses to call d_close(). Create internal version of
vn_close() which can avoid dropping the vnode reference if needed, and
use this to execute VOP_CLOSE() without acquiring a new reference.
Note that any parallel reference to the vnode would still prevent
d_close call, if the reference is not from an opened file, e.g. due to
stat(2).
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
for files which do not have DTYPE_VNODE type.
Both flock(2) and fcntl(2) syscalls refuse to acquire advisory lock on
a file which type is not DTYPE_VNODE. Do the same when lock is
requested from open(2).
Restructure the block in vn_open_vnode() which handles O_EXLOCK and
O_SHLOCK open flags to make it easier to quit its execution earlier
with an error.
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Protected symbol reference in GOT of the defining object must be
resolved to itself, same as -Bsymbolic globally.
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9317
This implements hardware assisted quiet IE support. Quiet time is
an optional interval on DFS channels (but doesn't have to be DFS
only channels! sigh) where the station and AP can be quiet in order
to allow for channel utilisation measurements. Typically that's
stuff like radar detection, spectral scan, other-BSS frame sniffing,
checking how busy the air is, etc.
The hardware implements it as one of the generic timers, which is
supplied a period, offset from the trigger period and duration
to stay quiet. The AP can announce quiet time configurations which
change, and so this code also tracks that.
Implementation details:
* track the current quiet time IE
* compare the new one against the previous one - if only the TBTT
counter changes, don't update things
* If tbttcount=1 then program it into the hardware - that is when
it is easiest to program the correct starting offset (one TBTT +
configured offset).
* .. later on check to see if it can be done on any tbttcount
* If the IE goes away then remove the quiet timer and clear the
config
* Upon reset, state change, new beacon - clear quiet time IE
and just let it resync from the next beacon.
History:
This was work done initially by sibridgetech.com in 2011/2012/2013
as part of some FreeBSD wifi DFS contracting work they had for a
third party. They implemented the net80211 quiet time IE pieces
and had some test code for the station side which didn't entirely
use the timers correctly.
I figured out how to use the timers correctly without stopping/starting
the transmit DMA engine each time. When done correctly, the timer
just needs to be programmed once and left alone until the next
configuration change.
So, thanks to Himali Patel and Parthiv Shah for their work way
back then. I finally figured it out and finished it!
TODO:
* Now, I'd rather net80211 did the quiet time IE tracking and parsing,
pushing configurations into the driver is needed. I'll look at
doing that in a subsequent update.
* This doesn't handle multiple quiet time IEs, which will currently
just mess things up. I'll look into supporting that in the future
(at least by only obeying "one" of them, and then ignoring
subsequent IEs in a beacon/probe frame.)
* This also implements the STA side and not the AP side - the AP
side will come later, and involves taking various other intervals
into account (eg the beacon offset for multi-VAP modes, the
SWBA time, etc, etc) as well as obtaining the configuration when
a beacon is configured/generated rather than "hearing" an IE.
* .. investigate supporting quiet IE in mesh, tdma, ibss modes
* .. investigate supporting quiet IE for non-DFS channels
(so this can be done for say, 2GHz channels.)
* Chances are i should commit NULL methods for the ar5210, ar5211 HALs..
Tested:
* AR9380, STA mode - announcing quiet, removing quiet, changing quite
time config, whilst doing iperf testing;
* AR9380, AP mode.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vnops.c
* In zfs_freebsd_setattr, if the caller wants to set the birthtime,
set the bits that zfs_settattr expects
* In zfs_setattr, if XAT_CREATETIME is set, set xoa_createtime,
expected by zfs_xvattr_set. The two levels of indirection seem
excessive, but it minimizes diffs vs OpenZFS.
* In zfs_setattr, check for overflow of va_birthtime (from delphij)
* Remove red herring in zfs_getattr
sys/cddl/contrib/opensolaris/uts/common/sys/vnode.h
* Un-booby-trap some macros
New tests are under review at https://github.com/pjd/pjdfstest/pull/6
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9353
* 'blackhole' and 'reject' are mutually exclusive, replace printf() by errx()
when both are selected.
* 'trail' option is no longer supported since first import of arp from 4.4BSD.
XXX message was added 13 years ago in r128192. I believe it's time to remove
it.
* Use warnx() to print some informative messages instead of printf()
* Replace strncmp() by strcmp() when validating parameters and exit when invalid
parameter is found
Reviewed by: allanjude, vangyzen, cem
Approved by: allanjude
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D9504
Update comments to note these functions are reachable if lockstat is
enabled.
Check if the lock has any bits set before attempting unlock, which saves
an unnecessary atomic operation.
Some U-Boot versions do not initialize MT7620's Frame Engine.
Then it is not possible to receive packets from the network.
Setting GDMA1 Frames Destination Port to Port 0 (CPU) in GDM Forwarding
Configuration register solves this issue.
Submitted by: Hiroki Mori (yamori813@yahoo.co.jp)
Reviewed by: adrian mizhka (previous version)
Differential Revision: https://reviews.freebsd.org/D9301
* on the station side, only call the quiet time IE method if we have a
quiet IE - otherwise call the NULL method once, and then don't waste
time calling NULL
* on the beacon generation side - force a beacon regeneration each time
quiet time is enabled/disabled. Without this, enabling/disabling quiet
time IE would cause the beacon contents to be corrupted since none of
the "move contents around" logic (like for CSA and TIM handling) is implemented.
This changes the size of ieee80211_node so it requires a kernel recompile,
but no userland recompile.
Tested:
* AR9380, AP mode, enabling/disabling quiet time IE
* AR9380, STA mode, with upcoming driver changes.
According to the specification, CIE code alignment factor is an
arbitrary unsigned LEB128 encoded value.
PR: 216908
Reported by: Wolfgang Meyer
Obtained from: Upstream LLD r277105
MFC after: 1 week
This improves singlethreaded throughput on my test machine from ~247 mln
ops/s to ~328 mln.
It is mostly about avoiding the setup cost of lockstat.
Reviewed by: jhb (previous version)
* DISTDIR_IS_UNIONFS is set every time BSDINSTALL_DISTDIR is mounted inside
BSDINSTALL_CHROOT. Use this flag to decide if it needs to be umounted
* BSDINSTALL_CHROOT/dev is mounted when 'bsdinstall mount' is called, there is
no need to mount it again when user goes to shell after installation
Reviewed by: allanjude
Obtained from: pfSense
MFC after: 1 week
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D8573
using the ACPI C1/mwait sleep method.
Previously, the mwait instruction would return when an interrupt was
pending; however, the idle loop did not actually enable interrupts when
this occurred. This led to a situation where the idle loop could quickly
spin through the C1/mwait sleep method a number of times when an interrupt
was pending. (Eventually, the situation corrected itself when something
other than an interrupt triggered the idle loop to either enable interrupts
or schedule another thread.)
Reviewed by: kib, imp (earlier version)
Input from: jhb
MFC after: 1 week
Sponsored by: Netflix
Fix bugs found by Coverity in efipart.c.
The Issue is that efi_devpath_last_node() can return NULL pointer, and
therefore we should check for it. In real life we really do not
expect to see it to happen, so we will just error out from the test.
CID: 1371004
Reported by: Coverity
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9490
The primary end-goal of this drop is ease future merges with NetBSD and
collaborate further with the NetBSD project.
The goal was (largely, not completely as some items are still oustanding
in the NetBSD GNATS system) achieved by doing the following:
- Pushing as many changes required to port contrib/netbsd-tests
back to NetBSD as possible, then pull the upstream applied changes
back in to FreeBSD.
- Diff reduce with upstream where possible by:
-- Improving libnetbsd header, etc compat glue.
-- Using _SED variables to modify test scripts on the fly for items
that could not be upstreamed to NetBSD.
As a bonus for this work, this change also introduces testcases for
uniq(1).
Many thanks to Christos for working with me to get many of the changes
back into the NetBSD project.
In collaboration with: Christos Zoulas <christos@netbsd.org>
MFC after: 1 month
Sponsored by: Dell EMC Isilon
The 1s delay was added in the update to version 16 fw, where Family 8000
support was added.
Obtained from: DragonflyBSD commit bb480ca679a7ea530bdca6e41082d5755e9751dc
