Parse the R_MIPS_32 and R_MIPS_64 relocations. Both Elf_Rel and
Elf_Rela relocations are handled since O32 MIPS uses Elf_Rel while N64
uses Elf_Rela. Note that R_MIPS_32 is only handled for 32-bit mips
and R_MIPS_64 for 64-bit. N32 is untested.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D19870
This is fairly similar to the AES-GCM support in ccr(4) in that it will
fall back to software for certain cases (requests with only AAD and
requests that are too large).
Tested by: cryptocheck, cryptotest.py
MFC after: 1 month
Sponsored by: Chelsio Communications
A request to encrypt an empty payload without any AAD is unusual, but
it is defined behavior. Removing this assertion removes a panic and
instead returns the correct tag for an empty buffer.
Reviewed by: cem, sef
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20043
To workaround limitations in the crypto engine, empty buffers are
handled by manually constructing the final length block as the payload
passed to the crypto engine and disabling the normal "final" handling.
For HMAC this length block should hold the length of a single block
since the hash is actually the hash of the IPAD digest, but for
"plain" SHA the length should be zero instead.
Reported by: NIST SHA1 test failure
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add support for newer Thinkpad models with id LEN0268. Was tested on
Thinkpad T480 and ThinkPad X1 Yoga 2nd gen.
PR: 229120
Submitted by: Ali Abdallah <aliovx@gmail.com>
MFC after: 1 week
tools/boot/install-boot.sh was assuming that if a device was passed in,
it should operate on the current system and run efibootmgr etc. to
update the boot manager. However, rootgen.sh passes a md(4) device and
not a fixed disk.
Add a -u option to install-boot.sh to tell it to update the system
in-place and run efibootmgr etc.
Also, source install-boot.sh in rootgen.sh to allow it to find and
call make_esp_file etc. And pass the loader file to make_esp_file instead
of a directory name.
Reported by: ian
Reviewed by: ian,imp,tsoome
Differential Revision: https://reviews.freebsd.org/D19992
destroy_dev_sched_cb() is excessively asynchronous, and during media change
retaste new provider may appear sooner then device of the previous one get
destroyed.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
We may need the BSP to reboot, but we don't need any AP CPU that isn't the
panic thread. Any CPU landing in this routine during panic isn't the panic
thread, so we can just detect !BSP && panic and shut down the logical core.
The savings can be demonstrated in a bhyve guest with multiple cores; before
this change, N guest threads would spin at 100% CPU. After this change,
only one or two threads spin (depending on if the panicing CPU was the BSP
or not).
Konstantin points out that this may break any future patches which allow
switching ddb(4) CPUs after panic and examining CPU-local state that cannot
be inspected remotely. In the event that such a mechanism is incorporated,
this behavior could be made configurable by tunable/sysctl.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20019
VGLMouseFreeze() now only defers mouse signals and leaves it to higher
levels to hide and unhide the mouse cursor if necessary. (It is never
necessary, but is done to simplify the implementation. It is slow and
flashes the cursor. It is still done for copying bitmaps and clearing.)
VGLMouseUnFreeze() now only undoes 1 level of freezing. Its old
optimization to reduce mouse redrawing is too hard to do with unhiding
in higher levels, and its undoing of multiple levels was a historical
mistake.
VGLMouseOverlap() determines if a region overlaps the (full) mouse region.
VGLMouseFreezeXY() is the freezing and a precise overlap check combined
for the special case of writing a single pixel. This is the single-pixel
case of the old VGLMouseFreeze() with cleanups.
Fixes:
- check in more cases that the application didn't pass an invalid VIDBUF
- check for errors from copying a bitmap to the shadow buffer
- freeze the mouse before writing to the shadow buffer in all cases. This
was not done for the case of writing a single pixel (there was a race)
- don't spell the #defined values for VGLMouseShown as 0, 1 or boolean.
As with mlx5en, the idea is to drop unwanted traffic as early
in receive as possible, before mbufs are allocated and anything
is passed up the stack. This can save considerable CPU time
when a machine is under a flooding style DOS attack.
The major change here is to remove the unneeded abstraction where
callers of rxd_frag_to_sd() get back a pointer to the mbuf ring, and
are responsible for NULL'ing that mbuf themselves. Now this happens
directly in rxd_frag_to_sd(), and it returns an mbuf. This allows us
to use the decision (and potentially mbuf) returned by the pfil
hooks. The driver can now recycle mbufs to avoid re-allocation when
packets are dropped.
Reviewed by: marius (shurd and erj also provided feedback)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19645
The mouse signal SIGUSR2 was not turned off for normal termination and
in some other cases. Thus mouse signals arriving after the frame
buffer was unmapped always caused fatal traps. The fatal traps occurred
about 1 time in 5 if the mouse was wiggled while vgl is ending.
The screen switch signal SIGUSR1 was turned off after clearing the
flag that it sets. Unlike the mouse signal, this signal is handled
synchronously, but VGLEnd() does screen clearing which does the
synchronous handling. This race is harder to lose. I think it can
get vgl into deadlocked state (waiting in the screen switch handler
with SIGUSR1 to leave that state already turned off).
Turn off the mouse cursor before clearing the screen in VGLEnd().
Otherwise, clearing is careful to not clear the mouse cursor. Undrawing
an active mouse cursor uses a lot of state, so is dangerous for abnormal
termination, but so is clearing. Clearing is slow and is usually not
needed, since the kernel also does it (not quite right).
This GRE-in-UDP encapsulation allows the UDP source port field to be
used as an entropy field for load-balancing of GRE traffic in transit
networks. Also most of multiqueue network cards are able distribute
incoming UDP datagrams to different NIC queues, while very little are
able do this for GRE packets.
When an administrator enables UDP encapsulation with command
`ifconfig gre0 udpencap`, the driver creates kernel socket, that binds
to tunnel source address and after udp_set_kernel_tunneling() starts
receiving of all UDP packets destined to 4754 port. Each kernel socket
maintains list of tunnels with different destination addresses. Thus
when several tunnels use the same source address, they all handled by
single socket. The IP[V6]_BINDANY socket option is used to be able bind
socket to source address even if it is not yet available in the system.
This may happen on system boot, when gre(4) interface is created before
source address become available. The encapsulation and sending of packets
is done directly from gre(4) into ip[6]_output() without using sockets.
Reviewed by: eugen
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19921
points at the "latest" branch and one which points at the "quarterly"
branch. Install the "latest" version unless overridden via the newly
added PKGCONFBRANCH variable.
This does not change user-visible behaviour (assuming said vairable is
not set) but will make it easier to change the defaults in the future --
on stable branches we will want "latest" on x86 but "quarterly" elsewhere.
Discussed with: gjb
MFC after: 3 days
X-MFC: After MFCing this I'll make a direct commit to stable/* to
switch non-x86 architectures to "quarterly".
`xrange` is a pre-python 2.x compatible idiom. Use `range` instead. The values
being iterated over are sufficiently small that using range on python 2.x won't
be a noticeable issue.
MFC after: 2 months
Since D19668 was done, new users of the -n flag have surfaced. Parse
and ignore it on the command line until they can be updated.
Suggested by: rgrimes (in D19668).
Replace `except Environment, e:` with `except Environment as e` for
compatibility between python 2.x and python 3.x.
While here, fix a bad indentation change from r346620 by reindenting the code
properly.
MFC after: 2 months
From r346443:
"""
Replace hard tabs with four-character indentations, per PEP8.
This is being done to separate stylistic changes from the tests from functional
ones, as I accidentally introduced a bug to the tests when I used four-space
indentation locally.
No functional change.
"""
MFC after: 2 months
Discussed with: jhb
mtmsr and mtsr require context synchronizing instructions to follow. Without
a CSI, there's a chance for a machine check exception. This reportedly does
occur on a MPC750 (PowerMac G3).
Reported by: Mark Millard
r346307 inadvertently started installing FDT_DTS_FILE along with the kernel.
While this isn't necessarily bad, it was not intended or discussed and it
actively breaks some current setups that don't anticipate any .dtb being
installed when it's using static fdt. This change could be reconsidered down
the line, but it needs to be done with prior discussion.
Fix it by pushing FDT_DTS_FILE build down into the raw dtb.build.mk bits.
This technically allows modules building DTS to accidentally specify an
FDT_DTS_FILE that gets built but isn't otherwise useful (since it's not
installed), but I suspect this isn't a big deal and would get caught with
any kind of testing -- and perhaps this might end up useful in some other
way, for example by some module wanting to embed fdt in some other way than
our current/normal mechanism.
Reported by: Mori Hiroki <yamori813@yahoo.co.jp>
MFC after: 3 days
X-MFC-With: r346307
The CCM test vectors use a slightly different file format in that
there are global key-value pairs as well as section key-value pairs
that need to be used in each test. In addition, the sections can set
multiple key-value pairs in the section name. The CCM KAT parser
class is an iterator that returns a dictionary once per test where the
dictionary contains all of the relevant key-value pairs for a given
test (global, section name, section, test-specific).
Note that all of the CCM decrypt tests use nonce and tag lengths that
are not supported by OCF (OCF only supports a 12 byte nonce and 16
byte tag), so none of the decryption vectors are actually tested.
Reviewed by: ngie
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D19978
Pass in an explicit digest length to the Crypto constructor since it
was assuming only sessions with a MAC key would have a MAC. Passing
an explicit size allows us to test the full digest in HMAC tests as
well.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D19884
This copes more gracefully when older version of the nist-kat package
are intalled that don't have newer test vectors such as CCM or plain
SHA.
If the nist-kat package is not installed at all, this still fails with
an error.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20034
sbin/veriexec will ignore entries that have no hash anyway,
but loader needs to be explicitly told that such files are
ok to ignore (not verify).
We will report as Unverified depending on verbose level,
but with no reason - because we are not rejecting the file.
Reviewed by: imp, mindal_semihalf
Sponsored by: Juniper Networks
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org//D20018
tun destruction will not continue until TUN_OPEN is cleared. There are brief
moments in tunclose where the mutex is dropped and we've already cleared
TUN_OPEN, so tun_destroy would be able to proceed while we're in the middle
of cleaning up the tun still. tun_destroy should be blocked until these
parts (address/route purges, mostly) are complete.
PR: 233955
MFC after: 2 weeks
If kern.random.initial_seeding.bypass_before_seeding is disabled, random(4)
and arc4random(9) will block indefinitely until enough entropy is available
to initially seed Fortuna.
It seems that zero flowids are perfectly valid, so avoid blocking on random
until initial seeding takes place.
Discussed with: bz (earlier revision)
Reviewed by: thj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20011
As mphyp_pte_unset() can also remove PTE entries, and as this can
happen in parallel with PTEs evicted by mphyp_pte_insert(), there
is a (rare) chance the PTE being evicted gets removed before
mphyp_pte_insert() is able to do so. Thus, the KASSERT should
check wether the result is H_SUCCESS or H_NOT_FOUND, to avoid
panics if the situation described above occurs.
More details about this issue can be found in PR 237470.
PR: 237470
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20012
Tested by Greg V with mlx5en on an Ampere eMAG instance at Packet.com on
c2.large.arm (with some additional uncommitted PCIe WIP).
PR: 237055
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: hselasky
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19983
RFC 4391 specifies that the IB interface GID should be re-used as IPv6
link-local address. Since the code in in6_get_hw_ifid() ignored
IFT_INFINIBAND case, ibX interfaces ended up with the local address
borrowed from some other interface, which is non-compliant.
Use lowest eight bytes from GID for filling the link-local address,
same as Linux.
Reviewed by: bz (previous version), ae, hselasky, slavash,
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20006
In r297225 the initial INP_RLOCK() was replaced by an early
acquisition of an r- or w-lock depending on input variables
possibly extending the write locked area for reasons not entirely
clear but possibly to avoid a later case of unlock and relock
leading to a possible race condition and possibly in order to
allow the route cache to work for connected sockets.
Unfortunately the conditions were not 1:1 replicated (probably
because of the route cache needs). While this would not be a
problem the legacy IP code compared to IPv6 has an extra case
when dealing with IP_SENDSRCADDR. In a particular case we were
holding an exclusive inp lock and acquired the shared udbinfo
lock (now epoch).
When then running into an error case, the locking assertions
on release fired as the udpinfo and inp lock levels did not match.
Break up the special case and in that particular case acquire
and udpinfo lock depending on the exclusitivity of the inp lock.
MFC After: 9 days
Reported-by: syzbot+1f5c6800e4f99bdb1a48@syzkaller.appspotmail.com
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D19594
Add the ability to report ATA device power mode with the cmmand 'powermode'
to compliment the existing ability to set it using idle, standby and sleep
commands.
MFC after: 2 weeks
Sponsored by: Multiplay
visible on armv7 and armv8. Similar issue to rS302292.
Obtained from: Semihalf
Authored by: Michal Krawczyk <mk@semihalf.com>
Approved by: wma
Differential Revision: https://reviews.freebsd.org/D19932
Summary: when using pseries-llan driver, Opkts and Oerrs counters (netstat
-i) are always zero. This patch adds an small error handling to increment
these counters.
Submitted by: alfredo.junior_eldorado.org.br
Differential Revision: https://reviews.freebsd.org/D20009
Some hypervisor calls, such as H_SEND_LOGICAL_LAN, take more arguments than
are traditionally passed in registers. The HCALL ABI will accept these
arguments in r11 and r12. With ELFv2 ABI, these arguments are 2
double-words lower than ELFv1 ABI, as two double-words in the stack frame
are no longer used, and therefore removed from the frame. Fix the offsets
for loading the registers for the HCALL. This fixes the phyp_llan driver
with ELFv2 kernel.
Submitted by: alfredo.junior_eldorado.org.br
Differential Revision: https://reviews.freebsd.org/D20008
Summary:
Optimize strcmp for powerpc64.
Data is loaded by double words and cmpb intruction is used to find '\0'.
Some performance gain rates between the current and the optimized solution:
String size (bytes) Gain rate
<=8 0.59%
<=16 1.92%
32 3.02%
64 5.60%
128 10.16%
256 18.05%
512 30.18%
1024 42.82%
Submitted by: alexandre.yamashita_eldorado.org.br,
leonardo.bianconi_eldorado.org.br
Differential Revision: https://reviews.freebsd.org/D15220
During processing we maintain symbol offsets in the 64-bit s_so array,
and when writing the archive convert to 32-bit if no offsets are greater
than 4GB. However, this was somewhat inefficient as we looped over the
array twice: first, converting to big endian and second, writing each
32-bit value one at a time (and incorrectly so on big-endian platforms).
Instead, when writing a 32-bit archive shuffle convert symbol data to
big endian (as required by the ar format) and shuffle to the beginning
of the allocation at the same time.
Also correct emission of the symbol count on big endian platforms.
Further changes are planned, but this should fix powerpc64.
Reported by: jhibbits, mlinimon
Reviewed by: jhibbits, Gerald Aryeetey (earlier)
Tested by: jhibbits
MFC after: 10 days
MFC with: r346079
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20007
worked right for white interiors and black borders was used). Advertise
this by changing the default colors to a red interior and a white
border (the same as the kernel default). Add undocumented env variables
for changing these colors. Also change to the larger and better-shaped
16x10 cursor sometimes used in the kernel. The kernel choice is
fancier, but libvgl is closer to supporting the larger cursors needed
in newer modes.
The (n)and-or logic for the cursor doesn't work right for more than 2
colors. The (n)and part only masks out all color bits for the pixel
under the cursor when all bits are set in the And mask. With more
complicated logic, the non-masked bits could be used to implement
translucent cursors, but they actually just gave strange colors
(especially in packed and planar modes where the bits are indirect
through 1 or 2 palettes so it is hard to predict the final color).
They also gave a bug for writing pixels under the cursor. The
non-masked bits under the cursor were not combined in this case.
Drop support for combining with bits under the cursor by making any nonzero
value in the And mask mean all bits set.
Convert the Or mask (which is represented as a half-initialized 256-color
bitmap) to a fully initialized bitmap with the correct number of colors.
The 256-color representation must be as in 3:3:2 direct mode iff the final
bitmap has more than 256 colors. The conversion of colors is not very
efficient, so convert at initialization time.
This commit adds new if_alloc_domain() and if_alloc_dev() methods to
allocate ifnets. When called with a domain on a NUMA machine,
ifalloc_domain() will record the NUMA domain in the ifnet, and it will
allocate the ifnet struct from memory which is local to that NUMA
node. Similarly, if_alloc_dev() is a wrapper for if_alloc_domain
which uses a driver supplied device_t to call ifalloc_domain() with
the appropriate domain.
Note that the new if_numa_domain field fits in an alignment pad in
struct ifnet, and so does not alter the size of the structure.
Reviewed by: glebius, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19930
There's no reason why a special case needs to be added specifically for amd64,
arm, and i386, as the code is written in machine architecture agnostic C/C++.
This will make it possible for all supporting clang architectures to produce
runtime coverage with `--coverage`.
MFC after: 2 weeks
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D20003
