39673 Commits

Author SHA1 Message Date
dfr
c2207db8bb Make this build if there is an obj directory. 1999-08-02 19:16:42 +00:00
msmith
d501bf979d Don't trust the segment limits that the BIOS reports; instead give it
as much space as possible to avoid lossage due to sloppy BIOS
programming.
1999-08-02 18:46:34 +00:00
se
4983311c1d Add missing "path mnemonics" as given in Table 4-3 of rev. 1.2 of the
ARC Specification.
1999-08-02 18:26:28 +00:00
se
5efdb8aee5 Remove accidental 8bit character in error message.
Add checks for malloc failure and add error exit in case of malloc failure.
Add rcsid.

Submitted by:	charnier
1999-08-02 17:50:07 +00:00
se
d3b550b224 Fix typo and use Fx macro instead of literal FreeBSD.
Submitted by:	charnier
1999-08-02 17:45:21 +00:00
brian
1e67382ede Use err[x]/warn[x] and improve error reporting
Submitted by: charnier
1999-08-02 16:59:28 +00:00
brian
2f17ec0805 #ifdef IPPROTO_OSPFIGP before expecting it to be defined.
This unbreaks OpenBSD.
1999-08-02 15:29:19 +00:00
sheldonh
744826805a Add -n option to print numeric user and group IDs instead of names
in a long (-l) listing.

MFC-jockies should make sure that bde's concerns regarding the number
of digits required to represent a uid_t and the use of snprintf
on the associated PR have been addressed before going wild.

PR:	12866
Reported by:	Philip Kizer <pckizer@nostrum.com>
Obtained from:	NetBSD
1999-08-02 14:55:58 +00:00
brian
5b5828498c Filter ospf and igmp separately.
Kind-of submitted by: phk
1999-08-02 11:53:16 +00:00
asami
ede804a714 Add new ports category "ftp". 1999-08-02 11:33:19 +00:00
asami
d63e134425 Add ports-ftp. 1999-08-02 11:31:04 +00:00
obrien
110c68efc7 Use Byacc rather than Bison. 1999-08-02 10:02:07 +00:00
imp
31a7ff272f Clear flags on psuedo terminals before trying to chmod and chown them. 1999-08-02 05:42:44 +00:00
hoek
7f4aba7cc3 English fixes: consistent spacing after periods, "userland", not "user land",
other typos, ~four grammar gnits, an ironic case of incorrect
               parallelization, bad capitalization, an incorrect use of the
               infamous slash ('/'), and an unclear sentence.
1999-08-02 04:00:33 +00:00
hoek
e8fde6f570 Bruce noted that the use of err(), fixed to errx() in the last commit,
did not specify an exit code.  This implies the use of either a hand-
rolled err() (Bruce's suggestion) or a random error code (my suggestion),
both of which are against the style guidelines.  This commit specifies
the correct error code (implicitly).  This also changes the error message
to be a little more helpful.
1999-08-02 03:18:17 +00:00
mdodd
c790088cf6 Move the specification of EDGE/LEVEL triggered interrupts to
eisa_add_intr() which now takes an additional arguement (one of
EISA_TRIGGER_LEVEL or EISA_TRIGGER_EDGE).

The flag RR_SHAREABLE has no effect when passed to
bus_alloc_resource(dev, SYS_RES_IRQ, ...) in an EISA device context as
the eisa_alloc_resource() call (bus_alloc_resource method) now deals
with this flag directly, depending on the device ivars.

This change does nothing more than move all the 'shared = inb(foo + iobsse)'
nonesense to the device probe methods rather than the device attach.

Also, print out 'edge' or 'level' in the IRQ announcement message.

Reviewed by: dfr
1999-08-01 22:57:09 +00:00
hoek
6a57215607 Mention that EXIT_SUCCESS and EXIT_FAILURE are preferred over
sysexits.h-values as exit codes for portable programs.
1999-08-01 20:46:45 +00:00
sada
737bcd6808 Typo of sample command line.
Submitted by: Seiichi Satomi <ssatomi@rr.iij4u.or.jp>
1999-08-01 20:31:57 +00:00
nik
a25123d94a Richard the Lionheart was crowned on 3rd September 1189, not the 27th
February.

If you do a web search for "lionheart crowned" you'll get lots of
conflicting information.  Some sites say 3rd September, while others
say 27th February.  Most of the "27th February" crowd seem to take their
information from other incarnations of this file on other operating
systems.

After a very pleasant afternoon spent lunching with my girlfriend's
parents, I availed myself of their extensive reference library.

You'd be surprised how hard it is to get concrete information about this.
The _Encyclopedia Brittanica_ doesn't mention the date, only the year, as
does _Brewer's Dictionary of Phrase and Fable_, as do all the other printed
sources I tried.  One of them even said July 7th 1189!  Microsoft's (yeah,
so sue me) Encarta '95 has quite a comprehensive entry, but again, no
day and month information

In desperation, I tried the web once more, and finally stumbled upon
http://www.btinternet.com/~timeref/hsttime2.htm.  This revealed that
Henry II died on 6th July 1189 (presumably the source of the 7th July
entry in another reference), and that Richard was crowned on 3rd
September.

Best of all, this site gives references.  So if any of you have a copy of
_The Life and Times of Richard I_, John Gillingham, pub. George Weidenfeld
and Nicholson Limited, 1974, then you can confirm this for yourselves.

For completenesses sake, I tried to find an ISBN number for the above
book.  But Amazon and Barnes and Noble don't appear to stock it (although
it looks like a revised version, by the same author, is due out in October
1999, in case anyone's interested).

PR:             docs/10488
Submitted by:   solon@macaulay.demon.co.uk
1999-08-01 19:54:02 +00:00
imp
9f73e59b13 Add ipfw recompile and bpfilter -> bpf changes 1999-08-01 18:58:45 +00:00
imp
b1eeaaf280 Note need to recompile pccardd with latest kernel. 1999-08-01 18:19:03 +00:00
imp
fcdf2e3fd0 o Add additional printfs for error cases when we can't attach the device.
o Add field to dev_desc for the size of the io port range.  This isn't
  used yet in the committed sources, but will make the transition easier
  in the future.

If you build this into your kernel, you will need to rebuild pccardd.
1999-08-01 18:12:51 +00:00
imp
564b182ca1 o Add "debuglevel" keyword to config file.
o Document debug level keyword
o Implement debug level:
	o For most of the diagnostic messages, change them from #ifdef DEBUG
	  to if (debuglevel > 0).
	o Add a couple more diagnostic messages that weren't present before
	o Fix a couple of excessively long lines.
Reviewed by: hosokawa-san

o Start to implement the stopgap kludge for -current's pccard code by passing
  the length of the i/o range.  If DEV_DESC_HAS_SIZE is defined, we'll set
  the size.  This is done as an ifdef so that I can generate patches
  against the kernel more easily.
o Add preliminary support for tweaking sleep times, but leave it
  disabled until a good range of values can be established.

Didn't fix: logmsg problem noted by Nate.
1999-08-01 18:04:26 +00:00
green
d848a791d1 Make ipfw's logging more dynamic. Now, log will use the default limit
_or_ you may specify "log logamount number" to set logging specifically
the rule.
   In addition, "ipfw resetlog" has been added, which will reset the
logging counters on any/all rule(s). ipfw resetlog does not affect
the packet/byte counters (as ipfw reset does), and is the only "set"
command that can be run at securelevel >= 3.
   This should address complaints about not being able to set logging
amounts, not being able to restart logging at a high securelevel,
and not being able to just reset logging without resetting all of the
counters in a rule.
1999-08-01 16:57:24 +00:00
obrien
7263583ccb Clarify that "-w" ignores horizontal white space changes. 1999-08-01 16:07:09 +00:00
kato
b66a123aa5 Sync with sys/i386/conf/majors.i386 revision 1.80. 1999-08-01 16:03:31 +00:00
obrien
3766f18249 Only use Bison to generate cc1plus's parse code. 1999-08-01 15:44:51 +00:00
newton
829f896d96 Cleanup - diked out a heap of old KLM stuff that isn't needed anymore. 1999-08-01 12:51:06 +00:00
grog
8e1f774f0c Remove inappropriate references to the wrong name for the bootstrap
manager, thus killing two birds with one stone.

Objected-to-by:	      bde
		      rnordier
1999-08-01 06:40:11 +00:00
alc
33da09bf48 Move the memory access behavior information provided by madvise
from the vm_object to the vm_map.

Submitted by:	dillon
1999-08-01 06:05:09 +00:00
alc
319a1b1319 pmap_object_init_pt:
Verify that object != NULL.
1999-07-31 23:02:57 +00:00
bde
dc9bf9361a Fixed $Id$.
Removed POSIX.1/NetBSD markup (braces) for NAME_MAX, etc.  We don't
define this.  Most FreeBSD man pages hard-code the limits; in fact,
utimes.2 recently became the only file in libc/sys/*.2 that mentions
NAME_MAX.  There probably should be mandoc macros for this.
1999-07-31 22:29:17 +00:00
bde
54580d0099 Removed a duplicate reference to System V.4. 1999-07-31 22:14:46 +00:00
bde
435380cba3 Fixed syntax error in previous commit. 1999-07-31 22:10:17 +00:00
bde
712a546a35 FIxed disordering in previous commit. Fixed some old disorder. 1999-07-31 22:00:09 +00:00
hoek
c33aa2784f Add a -E flag, similar to -e (overide variables from environment) except
that -E only operates for a specified variable.  Useful since the -e option
will often pull-in many unwanted variable overrides (esp. in a make world
situation).  Uses include overriding BINOWN (which cannot be done by normal
methods or through abuses of MAKEFLAGS) or likely for ports to honour CFLAGS
(provided they're running on a system whose make(1) has this option).
1999-07-31 20:53:02 +00:00
hoek
09a53fd5c6 Print an error message on illegal numerical arguments.
Submitted by: bin/9349 (slightly modified) Assar Westerlund <assar@sics.se>
1999-07-31 20:40:23 +00:00
hoek
19b723fecc When printing an error message after command execution fails, don't assume
the only possible error is "command not found".  This makes debugging of
messages such as "/bin/sh: not found" less common...
1999-07-31 20:38:22 +00:00
hoek
814ee99b50 Remove explicit testing of the NOFSCHG variable. Its functionality (in this
file) is now superceeded by INSTALLFLAGS_EDIT in bsd.{prog,kmod,lib}.mk.
1999-07-31 20:32:31 +00:00
hoek
ea145ecb4c Add variable INSTALLFLAGS_EDIT used to remove arbitrary INSTALLFLAGS.
Specifically intended for removing -fschg ("INSTALLFLAGS_EDIT=:S/schg/uchg/")
this makes the NOFSCHG flag redundant.  NOFSCHG will still be honoured by
bsd.lib.mk but is valid for buildworld only.  NOFSCHG is still implemented in
the old way (ie. _not_ ".if NOFSCHG then { INSTALLFLAGS_EDIT+=:S/schg/,/ }"
to emphasize the fact that NOFSCHG is only supported in a limited
fashion and for buildworld.

The interface and implementation are such that future use of flags such
as sappnd can also be easily removed or altered (perhaps to uappnd).

This commit brought to you by the letters B, D, and E, and the numbers six,
one, thirteen, and three.
1999-07-31 20:27:33 +00:00
jkh
50a739edfc Add INSTALL.TXT back. 1999-07-31 19:15:29 +00:00
alc
5180aa1c5c Change the type of vpgqueues::lcnt from "int *" to "int". The indirection
served no purpose.
1999-07-31 18:31:00 +00:00
ache
2e30179cc4 Tune table since 0200-0206 is not available, add more chars 1999-07-31 15:51:57 +00:00
ache
8dc7ae60a2 bad news: chars 0200-0206 used internally in troff, make them back illegal 1999-07-31 15:15:15 +00:00
hoek
581ea05e68 Use errx() instead of err() in example code calling err() after strtol(). 1999-07-31 15:04:37 +00:00
ache
eea917b87e make all chars above 127 legal 1999-07-31 14:57:13 +00:00
ache
0515b9ac0b change prev. commit: emulate latin1 on ascii if latin1 chars are
in the text as groff authors suppose
1999-07-31 14:16:04 +00:00
hoek
6dfe0403e2 Comment change: "Be warned, this will update your installed system, except
for the configuration files in the /etc directory." ....  and the kernel.
1999-07-31 13:47:23 +00:00
ache
deba43bd2e Add more koi8-r chars 1999-07-31 13:17:47 +00:00
ache
5b271012aa install msafer.7 1999-07-31 12:20:29 +00:00