This is mostly to allow using MAKEOBJDIRPREFIX in src-env.conf on stable where
src.sys.obj.mk is not going to be MFC'd. It is still valid on head but
effectively a NOP due to MAKEOBJDIRPREFIX being handled differently in
src.sys.obj.mk.
Reported by: eadler
MFC after: 1 week
Sponsored by: Dell EMC
A sub-make, such as in 'make buildworld', may want to override MAKEOBJDIRPREFIX
but is unable to do so if src-env.conf is forcing it to another value. Without
using '?=' the sub-make may use the wrong .OBJDIR.
Reported by: eadler
Sponsored by: Dell EMC
instead of pause() in the msleep() function to avoid rounding errors when
converting delay values forth and back. Add a guard for a delay value
of zero milliseconds which is undefined.
MFC after: 1 week
Requested by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
It would have been on an actual named pass before, but none were really
appropriate in name. Move it to the recently created SUPPORTDEV pass, which
perfectly describes it and keeps it in the right order.
Getting regulator is good, enabling them is better.
When the mmc stack decide to change the voltage for IO, don't
change the main vcc of the sd/mmc, only the io vcc.
AXP803 and AXP813/818 are very similar, only two regulators differs.
AXP803 is the companion chip for A64/R18
AXP813 is the companion chip for A83T
AXP818 is the companion chip for H8 (~A83T)
Add support for all regulators found in both of them.
- All of our default positions were offset from forth
- Our menu frame size was smaller than in forth
- Logo/brand drawing had an off-by-one, drawing one column lower on the
screen than they should have been.
- While here, switch a print() to printc() as it's expected that logos may
contain color and other escpae sequences that we'll need to honor.
It may be set to "left" or "right" -- any other value will cause the title
to be centered.
I've chosen to position these things just inside the vertical borders,
rather than overlapping the corners. This is an arbitrary choice and easily
amendable if this looks terrible.
This allows lua to pass back a command string to be executed as if it were
typed at the loader prompt- loader tries to execute the string first as pure
lua, then parses it and gives lua a chance to intercept before it tries to
execute it itself.
This will be used to implement menu_timeout_command, among other things,
which *should* be used to execute basic loader commands independent of the
chosen interpreter.
Since that change the system call stack traces look like this:
...
sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe0028e13ac0
amd64_syscall() at amd64_syscall+0x79b/frame 0xfffffe0028e13bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe0028e13bf0
So, db_nextframe() stopped recognizing the system call frame.
This commit should fix that.
Reviewed by: kib
MFC after: 4 days
The reason for this new pass is :
The earlier pass names are really specific (interrupt, timer, scheduler etc ..)
and making a driver that other device driver (that attach at DEFAULT pass)
needs probe at earlier pass can be confiusing. We can live with GPIO driver
at INTERRUPT pass because they are often an interrupt controller too but having
a usb phy driver probed at RESOURCES (or SCHEDULER for example) is silly.
The number was choosen to have a lot of margin if we want to introduce other
pass in the futur.
Reviewed by: ian, imp, kevans
Differential Revision: https://reviews.freebsd.org/D14568
- Add fdt_pinctrl(4) with general information for the driver
- Add fdt_pinctrl(9) with fdt_pinctrl KPI description
Reviewed by: ian, manu, wblock
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14235
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
POSIX explicitly states that the application must declare union semun.
This makes no sense, but it is what it is. This brings us into line
with Linux, MacOS/Darwin, and NetBSD.
In a ports exp-run a moderate number of ports fail due to a lack of
approprate autotools-like discovery mechanisms or local patches. A
commit to address them will follow shortly.
PR: 224300, 224443 (exp-run)
Reviewed by: emaste, jhb, kib
Exp-run by: antoine
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14492
This deliberately breaks the API in preperation for future syscall
revisions which will remove these nonstandard members.
In an exp-run a single port (devel/qemu-user-static) was found to
use them which it did becuase it emulates system calls. This has
been fixed in the ports tree.
PR: 224443 (exp-run)
Reviewed by: kib, jhb (previous version)
Exp-run by: antoine
Sponsored by: DARPA, AFRP
Differential Revision: https://reviews.freebsd.org/D14490
r323791 changed the return value of zpool_read_label. Error paths that
previously returned 0 began to return -1 instead. However, not all error
paths initialized errno. When adding vdevs to a very large pool, errno could
be prepopulated with ENOMEM, causing the operation to fail. Fix the bug by
setting errno=ENOENT in the case that no ZFS label is found.
PR: 226096
Submitted by: Nikita Kozlov
Reviewed by: avg
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13088
Rather than before the menu is drawn. The drawer is going to reset the
crusor position as soon as it draws anything anyways, so doing it before
serves no purpose. Setting it after is needed so we don't clobber the menu
when we start booting.
copyout(9) family.
The addresses are user-controllable, and if the process ABI allows
mapping at zero, then the zero address is meaningful, contradicting
the definition of _Nonnull. In any case, it does not require any
special code to handle NULL udaddr.
It is not clear if __restrict makes sense as well, since kaddr and
udaddr point to different address spaces, so equal numeric values of
the pointers do not imply aliasing and a legitimate. But leave it for
later.
copyinstr(9) does not have its user address argument annotated.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
printc does not need the features or the overhead of printf. It does not
take formatting strings, and it pipes the single string argument through an
"%s" format.
Instead, use putc directly. This pipes the string through in its entirety as
a series of 'unsigned char's, generally straight to the console emulator.
Discussed with: tsoome
r330282 registered loader.printc as printc, so use it instead. This makes
sense for a couple reasons, the major point being that it reads a little bit
easier and pairs nicely with the global 'print'.
Similar cases can not really be made for other loader.* functions as most of
them are either highly specific to our use-case or usually available in
other modules, such as `os`. printc does not have a standard implementation
in the Lua world(*), so we have a little more leeway with it, and it's kind
of a special case of the globally available 'print'.
(*) I've been in the Lua world for all of two weeks, so this could be wrong.
- Add drawer.frame_styles to map out the kinds of characters we need for the
different loader_menu_frame values
- Respect loader_menu_frame, default to double[*]
- (imp) Use loader.printc instead of print- print adds a newline to the
output, which is not the right thing we want to be doing.
- (imp) Draw horizontal frames a little more efficiently- setting the cursor
after every line segment is horribly inefficient, especially on serial
consoles. Halve the number of characters written at the expense of an
additional loop to draw the bottom frame, which is likely more efficient
in the long run for some of less ideal scenarios.
[*] menu.4th(8) claims that the default here was single, but unset
loader_menu_frame yielded double and we didn't have any overrides in the
default loader.conf(5), so double it is.
