vm_page_assert_xbusied() asserts that the busying thread is the current
thread. For some uses of vm_page_free_invalid() (e.g., error handling
in vnode_pager_generic_getpages_done()), this condition might not hold.
Reported by: Jenkins via trasz
Reviewed by: chs, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25828
The gate control bit offset was correctly specified, but AW_CLK_HAS_GATE
flag was not set.
Tested with (C)IR receiver on Orange Pi PC Plus.
Reviewed by: manu
MFC after: 1 week
Allow the serial number, firmware revision, model number and nominal media
rotation rate (nmrr) parameters to be set from the command line.
Note that setting the nmrr value can be used to indicate the AHCI
device is an SSD.
Submitted by: Wanpeng Qian
Reviewed by: jhb, grehan (#bhyve)
Approved by: jhb, grehan
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24174
This has for a while been replaced by makesyscalls.lua in the stock FreeBSD
build. Ensure downstreams get some notice that it'a going away if they're
reliant on it, maybe.
trying to set it.
r362490 added support for setting of the TimeCreate (va_birthtime) attribute,
but it does so without checking to see if the server supports the attribute.
This could result in NFSERR_ATTRNOTSUPP error replies to the Setattr operation.
This patch adds code to check that the server supports TimeCreate before
attempting to do a Setattr of it to avoid these error returns.
r362490 marked that the NFSv4 attribute TimeCreate (va_birthtime) is supported,
but it did not change the NFS server code to actually do it.
As such, errors could occur when unrolling a tarball onto an NFSv4 mounted
volume, since setting TimeCreate would fail with a NFSERR_ATTRNOTSUPP reply.
This patch fixes the server so that it does TimeCreate and also makes
sure that TimeCreate will not be set for a DS file for a pNFS server.
A separate commit will add a check to the NFSv4 client for support of
the TimeCreate attribute before attempting to set it, to avoid a problem
when mounting a server that does not support the attribute.
The failures will still occur for r362490 or later kernels that do not
have this patch, since they indicate support for the attribute, but do not
actually support the attribute.
The caller from kernel is expected to provide an valid g_class
pointer, instead of traversing the global g_class list, just
use that pointer directly instead.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25811
The two classes do not take any verbs and always gctl_error for
all requests, so don't bother to provide a ctlreq handler.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25810
implementation. The old description was left over from the 4.4 BSD Lite
import in 1994, and was a bit misleading (not all arches use simulated
reference bits, some implement reference tracking in hardware).
QEMU's RISC-V virt machine provides syscon-power and syscon-reset
devices as the means by which to shutdown and reboot. We also need to
ensure that we have attached the syscon_generic device before attaching
any syscon_power devices, and so we introduce a new riscv_syscon device
akin to aw_syscon added in r327936. Currently the SiFive test finisher
is used as the specific implementation of such a syscon device.
Reviewed by: br, brooks (mentor), jhb (mentor)
Approved by: br, brooks (mentor), jhb (mentor)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25725
On RISC-V, Clang warns with:
cast to smaller integer type 'unsigned int' from 'void (*)(void *)'
Instead, use %p as the standard format specifier for printing pointers.
Whilst Arm's pointer size is the same as unsigned, it's still cleaner to
use the right thing there too.
Reviewed by: brooks (mentor), emaste
Approved by: brooks (mentor), emaste
Differential Revision: https://reviews.freebsd.org/D25718
This device was originally used as part of the goldfish virtual hardware
platform used for emulating Android on QEMU, but is now also used as the
RTC for the RISC-V virt machine in QEMU. It provides a simple 64-bit
nanosecond timer exposed via a pair of memory-mapped 32-bit registers,
although only with 1s granularity.
Reviewed by: brooks (mentor), jhb (mentor), kp
Approved by: brooks (mentor), jhb (mentor), kp
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25717
In 2018, r338094 removed the commented-out code for supporting the -t
command line option which had been present since the BSD 4.4 Lite import,
but was never implemented for freebsd.
This does the same for the man page.
This isn't used for us but allow us to port drivers more easily.
Reviewed by: hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25703
Linux does the same, this avoids ifdef or extra includes in ported drivers.
Reviewed by: emaste, hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25702
Linux does the same, this avoids ifdef or extra includes in ported drivers.
Reviewed by: emaste, hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25701
'y' does not handle bracket expressions, treat '[' as ordinary character
and do not apply bracket expression checks (GNU sed agrees).
PR: 247931
Reviewed by: pfg, kevans
Tested by: antoine (exp-run), Quentin L'Hours <lhoursquentin@gmail.com>
Differential Revision: https://reviews.freebsd.org/D25640
This patch uses a slightly different algorithm for nfsrv_adj()
since ext_pgs mbuf lists are not permitted to have m_len == 0 mbufs.
As such, the code now frees mbufs after the adjustment in the list instead
of setting their m_len field to 0.
Since mbuf(s) may be trimmed off the tail of the list, the function now
returns a pointer to the last mbuf in the list. This saves the caller
from needing to use m_last() to find the last mbuf.
It also implies that it might return a nul list, which required a check for
that in nfsrvd_readlink().
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Use of ext_pgs mbufs will not be enabled until the kernel RPC is updated
to handle TLS.
routines out.
While there, also simplify the creation of label paths a little bit
by requiring the / suffix for label directory prefixes (ld_dir renamed
to ld_dirprefix to indicate the change) and stop defining macros for
these when they are only used once.
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25597
swap size by dividing a value, which was always a multiple of 64, by
64. Remove the code that reduced max swap size down to that cap.
Eliminate the distinction between BLIST_BMAP_RADIX and
BLIST_META_RADIX. Call them both BLIST_RADIX.
Make improvments to the blist self-test code to silence compiler
warnings and to test larger blists.
Reported by: jmallett
Reviewed by: alc
Discussed with: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25736
For purposes of handling hardware error reported via NMIs I need a way to
escape NMI context, being too restrictive to do something significant.
To do it this change introduces new swi_sched() flag SWI_FROMNMI, making
it careful about used KPIs. On platforms allowing IPI sending from NMI
context (x86 for now) it immediately wakes clk_intr_event via new IPI_SWI,
otherwise it works just like SWI_DELAY. To handle the delayed SWIs this
patch calls clk_intr_event on every hardclock() tick.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25754
ACLs are not supported, meaning their presence will force the use of the old lookup.
Reviewed by: kib
Tested by: pho (in a patchset)
Differential Revision: https://reviews.freebsd.org/D25579
Provides full scalability as long as all visited filesystems support the
lookup and terminal vnodes are different.
Inner workings are explained in the comment above cache_fplookup.
Capabilities and fd-relative lookups are not supported and will result in
immediate fallback to regular code.
Symlinks, ".." in the path, mount points without support for lockless lookup
and mismatched counters will result in an attempt to get a reference to the
directory vnode and continue in regular lookup. If this fails, the entire
operation is aborted and regular lookup starts from scratch. However, care is
taken that data is not copied again from userspace.
Sample benchmark:
incremental -j 104 bzImage on tmpfs:
before: 142.96s user 1025.63s system 4924% cpu 23.731 total
after: 147.36s user 313.40s system 3216% cpu 14.326 total
Sample microbenchmark: access calls to separate files in /tmpfs, 104 workers, ops/s:
before: 2165816
after: 151216530
Reviewed by: kib
Tested by: pho (in a patchset)
Differential Revision: https://reviews.freebsd.org/D25578
Modified on each permission change and link/unlink.
Reviewed by: kib
Tested by: pho (in a patchset)
Differential Revision: https://reviews.freebsd.org/D25573
from Intel DMAR support, so it can be used on other IOMMU systems.
Reviewed by: kib
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D25743
