Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to proxy values instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
The empty (unimplemented) test inputs for sparc64 trigger a -Wtype-limits build
failure because nitems of an empty array is always false, i.e., deadcode.
MFC after: 1 month
MFC with: r321455
Reported by: Jenkins (sparc64 job)
Only expose :accuracy and :reduction if !i386, similar to before,
but more holistically to avoid future -Wunused issue with the unused
functions.
MFC after: 1 month
the #ifdef block to only handle the rest of the logic in the loop in the
#else case.
MFC after: 3 days
Reported by: Coverity
CID: 1346844
Sponsored by: Dell EMC Isilon
The primary benefit of these functions is that argument
reduction is done once instead of twice in independent
calls to sin() and cos().
* lib/msun/Makefile:
. Add s_sincos[fl].c to the build.
. Add sincos.3 documentation.
. Add appropriate MLINKS.
* lib/msun/Symbol.map:
. Expose sincos[fl] symbols in dynamic libm.so.
* lib/msun/man/sincos.3:
. Documentation for sincos[fl].
* lib/msun/src/k_sincos.h:
. Kernel for sincos() function. This merges the individual kernels
for sin() and cos(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/k_sincosf.h:
. Kernel for sincosf() function. This merges the individual kernels
for sinf() and cosf(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/k_sincosl.h:
. Kernel for sincosl() function. This merges the individual kernels
for sinl() and cosl(). The merger offered an opportunity to re-arrange
the individual kernels for better performance.
* lib/msun/src/math.h:
. Add prototytpes for sincos[fl]().
* lib/msun/src/math_private.h:
. Add RETURNV macros. This is needed to reset fpsetprec on I386
hardware for a function with type void.
* lib/msun/src/s_sincos.c:
. Implementation of sincos() where sin() and cos() were merged into
one routine and possibly re-arranged for better performance.
* lib/msun/src/s_sincosf.c:
. Implementation of sincosf() where sinf() and cosf() were merged into
one routine and possibly re-arranged for better performance.
* lib/msun/src/s_sincosl.c:
. Implementation of sincosl() where sinl() and cosl() were merged into
one routine and possibly re-arranged for better performance.
PR: 215977, 218300
Submitted by: Steven G. Kargl <sgk@troutmask.apl.washington.edu>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10765
an inexact floating point exception. The variable cannot be eliminated,
unfortunately, otherwise the desired addition triggering the exception
will be emitted neither by clang, nor by gcc.
Reviewed by: Steve Kargl, bde
MFC after: 3 days
D8376 extended softfloat/hardfloat support, but used a macro that never
actually gets set except in libc and msun's Makefile.inc. So libc and libm
got built correctly, but any program including fenv.h itself assumed it was
on a hardfloat systen and emitted inline fpu instructions for
fedisableexcept() and friends.
Using __mips_soft_float makes everything work in all cases, since it's a
compiler-internal macro that is always set correctly for the target
PR: 217845
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
ATF tests have a default WARNS of 0, unlike other usermode programs. This
change is technically a noop, but it documents that the msun tests don't
work with any warnings enabled, at least not on all architectures.
Reviewed by: ngie
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Differential Revision: https://reviews.freebsd.org/D9933
The clang 4.x+ upgrade now causes this testcase to fail, but
only on amd64.
More investigation will be done to determine the cause.
MFC after: 1 week
Reported by: Jenkins
PR: 217528
Sponsored by: Dell EMC Isilon
Recent changes (maybe a side-effect of the ATF-ification in r314649)
invalidate the failure expectation.
PR: 205446
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This is being done as a precursor for work needed to annontate failing
testcases with clang 4.0+.
MFC after: 1 week
PR: 217528
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
of the clang version
This works around breakage on ^/stable/10 when running installworld from
a ^/stable/10 host where the test wouldn't be compiled on the first
go-around and would be missing when make installworld is run.
MFC after: 1 week
PR: 208703
Reported by: emaste
Sponsored by: Dell EMC Isilon
This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
These symbols already appear in the common lib/msun/Symbol.map.
Duplicate entries produce an error with LLVM's LLD linker.
Reviewed by: br
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8627
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
This cleans up a warning when building libm at higher WARNS levels and
makes the intent more clear. By the C standard the values are assigned
to subobject members in order so this change introduces no functional
change. (6.7.9 20)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8333
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
