This was disabled in r301468 due to -target/--sysroot sometimes being used in
the build and other times not being used. Now that it is always used since
r304681, it is safe to combine the features.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
The internal bootstrap compiler has a default sysroot set by TOOLS_PREFIX
and target set by TARGET/TARGET_ARCH. However, there are several needs to
always pass an explicit --sysroot and -target.
- External compiler needs sysroot and target flags.
- External ld needs sysroot.
- To be clear about the use of a sysroot when using the internal compiler.
- Easier debugging.
- Allowing WITH_SYSTEM_COMPILER+WITH_META_MODE to work together due to
the flip-flopping build command when sometimes using external and
sometimes using internal.
- Allow using no lld which has support for default paths.
The default sysroot in the bootstrap compiler is not changed. The
buildenv compiler will still work with its default and will also
include -target/--sysroot from CC in the environment.
MFC after: 3 days
Discussed with: emaste, brooks (BSDCam)
Reviewed by: emaste
Sponsored by: EMC / Isilon Storage Division
Allow netbooting on efi without having to setup any NFS server by rebuilding the
loader with LOADER_TFTP_SUPPORT like for the i386 pxeloader
Sponsored by: Gandi.net
This code should be able to support later AMD chipsets as well, but that
hasn't been tested.
SB800 supports accessing several different SMBus buses using the same
set of constrol registeirs plus special PMIO registers that control which
bus is selected. This could be exposed to consumers as several smb devices
each talking to its bus. This feature is not implemented yet.
MFC after: 2 weeks
Summary:
There is no need to call tlb1_init() twice. Now it is called first time from
booke_init() and second time from powerpc_init() (where it is under BOOKE
switch). Although this does not cause immediate problems in the mainline kernel,
this can lead to undesirable side effects like two TLB entries with the same VA
in the TLB1. Presence of two TLB entries with the same VA can hang CPU.
Test Plan:
Add initial mapping for UART to the tlb1_init(), build and boot the kernel,
ensure that mapping presents only once (most convinient way - through Lauterbah
or similar hardware debugger)
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7607
Summary: Current booke/pmap code ignores mas7 and mas8 on e6500 CPU.
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7606
So that Hyper-V can leverage them instead of rolling its own definition.
Discussed with: hps
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7592
Coverity correctly reported that it's impossible for /comparison/ to be 0
here, because the only way for the for loop to end is by /comparison/
being < 0.
Fortunately the consequences of this bug weren't severe; for duplicated
entries in the typedef names file it would unnecessarily duplicate strings
with strdup(), but pointers to those would replace existing ones. So this
was a memory leak at worst.
CID: 1361477
Obtained from: Piotr Stephaniak
Certain features, such as resolv_conf_passthrough=NULL, do not work
correctly due to this missing substitution.
Also remove the @PREFIX@ substitution, which is no longer needed.
Reviewed by: pfg
Approved by: vangyzen (mentor)
MFC after: 1 week
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7572
Shift the responsibility of allocating memory for the string duplicate
from the caller (set_option, add_typedefs_from_file) to the callee
(add_typename) as it has more knowledge about when the duplication
actually needs to occur.
Taken from: Piotr Stefaniak
This fixes parallel build issues when trying to depend on ${SUBDIR}. An
example of this in share/i18n/csmapper/Makefile where mapper.dir depends
on ${SUBDIR} having been traversed and built already. Before this
change running make in that directory would build the subdirectories
twice. This led to obscure build races. While reworking that build
may be possible, the framework should not so easily allow creating such
problems.
Now depending on <directory> will properly redirect to the
all_subdir_<directory> target rather than invoking the inline shell.
This also makes 'make -jX <directory>' now respect any
SUBDIR_DEPEND_<directory> statements when SUBDIR_PARALLEL is defined.
This is not entirely intended and may be changed later.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>'. It also provides the targets for
other uses.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is unifying more of the logic. Rather than create targets such
as 'all: all_subdir_foo' when using SUBDIR_PARALLEL and using
'all: _SUBDIR' when not using SUBDIR_PARALLEL, always use the
expanded out <target>_subdir_<directory> pattern. When not using
SUBDIR_PARALLEL, have each directory-target depend on the previously
defined targets as to respect the *order* of SUBDIR.
Using 'make -N' now prints all directory traversals individually rather
than using a loop, since a loop is no longer used to traverse.
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>' and making it simpler in the sense
that the pattern used to build is the same for all modes.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This partially reverts r296702 and reworks the original check to only
look in .CURDIR. This avoids ever trying to rebuild a .src file that is
already in the source tree as an override.
PR: 211952
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
return partial line on any errors. See the comment in fgetln.c.
Add corresponding comment to fgetwln() too.
2) Rewrite r304607 case 1).
3) Remove "Fast path" from __fgetwc_mbs() since it can't detect encoding
errors and ignores them all.
PR: 212033
MFC after: 7 days
Move msix_disable_migration under #ifdef SMP since it doesn't make sense
for !SMP kernels.
PR: 212014
Reported by: Glyn Grinstead <glyn@grinstead.org>
MFC after: 3 days
its own job because this breaks the simplified QEMU XHCI TRB parser,
which expects the complete USB control transfer as a series of back to
back TRBs. The old behaviour is kept under #ifdef in case this change
breaks enumeration of any USB devices.
PR: 212021
MFC after: 1 week
Several atf components require C++, and the test suite is not usable
if building WITHOUT_CXX.
Reviewed by: bdrewery, jmmv
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7597
Copy over amd64's cloudabi64_sysvec.c into i386 and tailor it to work.
Again, we use a system call convention similar to FreeBSD, except that
there is no support for indirect system calls (%eax == 0).
Where i386 differs from amd64 is that we have to store thread/process
entry arguments on the stack instead of using registers. We also have to
put an extra pointer on the stack for TLS (for GSBASE). Place that
pointer in the empty slot that is normally used to hold return
addresses. That seems to keep the code simple.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7590
The previous fix was tested mainly on 3 AT keyboards with USB adaptors where
it works. 1 USB keyboard doesn't translate Alt-PrintScreen, so the software
has to do it.
Reorganize a little to share some code and to not translate the unusual usb
scan code0x8a unless an Alt modified is set. Remove redundant check of Alt
modifiers. Translation now more clearly filters out Alt-PrintScreen before
the check.
The table of errors fixed in the previous commit had many bugs. Correct
table:
K_RAW Ctl-PrintScreen: E0-2A-E0-37 -> E0-37
K_RAW Alt-PrintScreen (with 4 comb. of Ctl/Shift): 79 -> 54
K_RAW Pause/Break (with 4 comb. of Alt/Shift): E0-46 -> E1-1D-45
K_CODE PrintScreen (with 4 comb. of Ctl/Shift): 54 -> 5c
K_CODE Alt-PrintScreen (with 4 comb. of Ctl/Shift): 7e -> 54
K_CODE Pause/Break (with 8 comb. of Ctl/Alt/Shift): 6c -> 68
That is 25 of 32 shift combinations for 2 keys fixed. All 16 combinations
were broken for K_CODE and thus also for K_XLATE.
1) Don't forget to set __SERR on __slbexpand() error.
2) Check for __fgetwc() errors using errno. Don't check for __SERR
as PR suggested, it user-visible flag which can stick from previous
functions and stdio code don't check it for this purpose.
PR: 212033
MFC after: 3 days
r304436 attempted to optimize the handling of incoming UDP packet by only
making an expensive call to in_broadcast() if the mbuf was marked as an
broadcast packet. Unfortunately, this cannot work in the case of point-to-
point L2 protocols like PPP, which have no notion of "broadcast".
Discussions on how to properly fix r304436 are ongoing, but in the meantime
disable the optimization to ensure that no existing network setups are broken.
Reported by: bms
pagetable is supported more will be added soon to support removing
superpages.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
is_completion_pending governs whether or not a callout will be scheduled
when new work is queued on the IOAT device. If true, a callout is
already scheduled, so we do not need a new one. If false, we schedule
one and set it true. Because resetting the hardware completed all
outstanding work but failed to clear is_completion_pending, no new
callout could be scheduled after a reset with pending work.
This resulted in a driver hang for polled-only work.
physical address. This is required when either mapping is writeable.
While here remove an unneeded call to pmap_pde, we already have the pde
from earlier in the function.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
configuring of EP0 and non-EP0 into xhci_cmd_evaluate_ctx() and
xhci_cmd_configure_ep() respectivly. This resolves some errors when
using XHCI under QEMU and gets is more in line with the XHCI
specification.
PR: 212021
MFC after: 1 week
